Used Trumabend V 50 for sale (79,751)

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A Hjdpfxsvmpgne Addsng -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: ready for operation (used), Metronic MI64210200-01 control panel - 230 V / 1.0 A / 50 Hz, used, minor signs of use, 100% functional, scope of delivery as per photos Hnsdpfxjtxuhxe Addog

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm Hsdou Dn Uvspfx Addong • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane Hedpjx Ein Sofx Addong

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t Hnsdpfxow Inrve Addeg dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: Hsdpfxewdvwtj Addeng - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz Hnsdpfx Adou Huuuodjg -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Condition: new, machine/vehicle number: 23-0053, mileage: 1,850 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 2,660 kg, overall weight: 4,500 kg, axle configuration: 4x4, wheelbase: 3,520 mm, fuel tank capacity: 90 l, color: white, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, total length: 6,100 mm, total width: 2,100 mm, total height: 3,150 mm, loading space volume: 12 m³, loading space length: 3,540 mm, loading space width: 1,740 mm, loading space height: 1,900 mm, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, The vehicle's basic color is pure white. NEW VEHICLE without initial registration! Special approval for registration available! *WARRANTY EXTENSION to 5 years from initial registration optionally possible! The color of the doors is IVECO white, no accident, the color of the doors is adjusted to the customer's request. In addition to the extensive standard equipment, there is: SPECIAL EQUIPMENT CHASSIS. Standard suspension, front axle ENGINE/GEARBOX/AXLES Emissions standard EURO VI E Start-up strategy standard Automatic torque converter transmission HI-MATIC 8HP Heated fuel filter Data set standard Diesel particulate filter Generator 3080 watts (14 volts x 220 amps) Comfortable sound insulation Handbrake control for remote start Fuel standard Aluminum radiator Heated crankcase ventilation Engine speed 3500 rpm Without engine start-stop system Without power take-off Oil pan standard DESCRIPTION CONSTRUCTION/DESIGN Rear doors opening angle 260° External loading lights above rear doors Loading area lights 2 x LED Sliding doors on both sides Partition wall, omitted SEATING Comfort seat for passenger with armrest and lumbar support, adjustable in height, inclination and lengthwise direction, hydraulically suspended Comfortable seat for driver with armrest and lumbar support, adjustable in height, inclination and lengthwise, hydraulically suspended ELECTRICS/LIGHTING Trailer socket 12V 13-pin Expansion module + CAN Open Automatic high beam control Light and rain sensor Fog lights Preparation for telematics system (telematics box) DRIVER'S CAB OUTSIDE. Additional vehicle key with remote control Rear view camera with dynamic lines Reverse warning signal, cannot be switched off Hnjdpfx Adet Ia Riedeg DRIVER'S CAB INTERIOR/AUDIO Roof storage above windshield Front and head/side/window airbags for driver and front passenger with belt tensioners Grab handle on A-pillar Manual air conditioning Steering column adjustable in height and angle Without rear wall insulation HI-Connect radio with Bluetooth hands-free system and multifunction steering wheel, compatible with Apple Car Play and Android Auto Cruise control Hot water auxiliary heating Central storage compartment with USB charging connection CHASSIS. Trailer coupling ball head Differential lock on drive axle(s), switchable Integrated fuel tank 90l Without spare wheel Without spare wheel storage ENGINE/GEARBOX/AXLES Exhaust tailpipe on the left side Eco-Smart function, omitted Rear axle ratio i = 4.444 Homologation incomplete for a complete vehicle (individual approval required) Air conditioning compressor 170ccm Run-Lock function ADDITIONAL EQUIPMENT ENGINE/GEARBOX/AXLES Protection for oil pan COLOR Pure white IC 082 RAL 9010 CONVERSIONS AND MODIFICATIONS ALL-WHEEL DRIVE CONVERSION AX TS DESCRIPTION TS 4x4 DAILY AX 35C-50C All-Road TS 4x4 DAILY AX Additional charge HI-MATIC TS 4x4 DAILY AX OFF-ROAD Single base with single tires TS 4x4 DAILY OFF-ROAD tires Purchase / financing / hire purchase / leasing / rental possible.      Subject to errors and prior sale!      Images may contain optional extras at additional cost!      Delivery date by arrangement!      Viewing by appointment only!      Address is office address only, not vehicle location!

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Hedpfjw Imq Rox Addsng

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,595 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,440 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Hedpfju Hulmjx Addjng Mast type: Duplex Technical condition: good

Condition: ready for operation (used), Year of construction: 1996, operating hours: 24,128 h, functionality: fully functional, travel distance X-axis: 530 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain Millplus Speed: 8,000 rpm Power: 15 kW Torque: 130 Nm Hnodpfx Adjv Tp Dmedsg Tool holder: SK40 NC swivel rotary table B-axis: 180°, 16 rpm C-axis: 360°, 18 rpm Clamping surface: Ø500 × 380 mm Table load (max.): 200 kg T-slot spacing / size: 63 / 14 H7 mm Center hole: Ø30 H7 mm Max. torque (rotary axis): 1,000 Nm Max. table top rotation (rotary axis): 18 rpm Max. swivel torque: 1,100 Nm Swivel speed: 16 rpm Movement and position measurement Rapid traverse in X/Y/Z axis: 30 m/min Displacement measuring system: Direct in X/Y/Z (glass scales) Tool magazine Tool magazine: 24-station Max. tool length from spindle nose: 280 mm Max. tool weight with automatic Tool change: 6 kg Max. total tool weight in the magazine: 80 kg Required compressed air: approx. 5.5 - 8.0 bar Compressed air consumption: approx. 7 m³/h Chip management Chip management: Chip tray MACHINE DETAILS On-time: 58,886 h Spindle time: 24,128 h Weight: 4,400 kg Installation dimensions: 5.2 x 4.0 x 3.1 m (without peripherals) Transport data: 2.45 x 1.76 x 3.38 m, 3.5 t The zero-point plate on the work table is not included in the scope of delivery.

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Hsdjtt Ntfopfx Addeng Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Pressure: 85 t Bending length: 2050 mm Frame gap: 1750 mm Control: DELEM Stroke: 215 mm Hsdjw D Abrspfx Addjng Throat depth: 410 mm Total power: 13 kW Weight: 8,750 kg Machine dimensions: 3190 x 2100 x 2375 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B0103A0209, overall weight: 11,000 kg, total length: 3,200 mm, total width: 2,400 mm, total height: 3,000 mm, pressing force: 85 t, TECHNICAL DETAILS Pressure force: 85 t Bending length: 2050 mm Column width: 1750 mm Thrust: 410 mm Hnodpfx Adev E Ncgsdog Operating pressure: max. 340 bar Stroke: max. 365 mm Deceleration: max. 95 ms Rapid traverse: 200 mm/s Working speed: 1 - 11 mm/s Retraction speed: 135 mm/s Safety distance Safety distance: min. 190 mm Machine weight Weight of the press: 9,950 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery 01x post protector, used Material color: yellow Finish: V total height: approx. 750 mm total width: approx. 100 mm inner width: approx. 93 mm total depth: approx. 60 mm material thickness: approx. 3,50 mm Grid/ hole spacing: approx. 300 mm number/ holes: 06 pcs. (03 pcs./side) Hole Ø: approx. 11 mm 06x hexagon head screw: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. A beyond that Hnodpjh Ei Udjfx Addjg desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Year of construction: 2013, grinding diameter 320 mm grinding length 1500 mm centre height 180 mm workpiece weight max. 150 kg grinding wheel size 400 x 50 x 203 mm grinding wheel speeds 1670 U/min grinding head - swivable +/- 30 ° adjustment grinding slide 246 mm workpiece spindle stepless 25-220 U/min grinding wheel adjustment manuell 0,01 / 0,0025 taper in spindle headstock MK 4 taper in spindle tailstock MK 4 Number of working hours ca. 20 h total power requirement 5,5 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 4,3 x 2 x 2 m Hydraulic universal cylindrical grinding machine with a machining length of 1500 mm and a grinding diameter of 320 mm, with internal grinding attachment. Rotatable workpiece spindle head and swiveling table, hydraulic longitudinal table movement, hydraulic rapid traverse of the grinding head, hydraulic grinding head feed when reversing the table, manual + hydraulic adjustment of the tailstock quill. For further details, see data sheets, pics 9 and 10. Commissioning 2015: The machine was only used for a FEW HOURS on special Hodpfx Adowyd S Dodsng workpieces, and then the orders dried up!

Condition: used, Year of construction: 2013, cutting diameter 250 mm Hnjdpfx Aoxab Efsddsg capacity 90 degrees: flat 250 x 450 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 250 x 190 mm table height ca. 650 mm saw band length 3300 mm dimensions of saw-band 3300 x 27 x 0,9 mm cutting speed 21 - 62 m/min total power requirement 1.5 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1739 x 571 x 1130 mm very rarely used (!!) Furnishing: - electro-hydraulic horizontal band saw - precise saw blade guidance - continuously adjustable belt speed - Continuously adjustable feed from the saw frame - heavy cast construction - manual quick material clamping - Setting options for miter cuts - Replacement saw blades - Coolant device * Machine link: ?machineno=1008-9173350

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Hnjdpfx Adeic Rl Dedsg Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, Year of construction: 2021, 585/600 mm 465/480 mm 385/400 mm Hedjwp Tiwopfx Addsng 900x500 mm 1200x250 mm 40-2000 U/min SK 40

Condition: new, functionality: fully functional, New device Enmair Electro-pneumatic sprue picker ER Hnsdpfer A D Itox Addog available immediately from stock ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Swivel angle to the right / left, as required Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. User interface: English, Dutch

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, Distance between columns 2.750 mm, Distance top of table to spindle nose 1.600 mm, fixed cross rail, 2 tables 2.500 x 4.000 mm, coupled 2.500 x 8.700 mm, power 58 kW, revs 1 – 1.800 rpm, base speed 136 rpm, max. torque 3.500 Nm, feeds and rapids 1 – 10.000 mm/min, traverses x y z 9.502 x 5.515 x 1.000 mm, quill movement 500 mm in 4 steps, automatic tool changer with 60 pockets, automatic mounting, 4 x 90° indexing and heel clearance for RAA Electric and mechanic remanufacturing in 2017 with • New CNC control SINUMERIK 840 D or at your choice • New electric cabinet • New wiring • New motors for all axis and main spindle Hnodpfx Aedkmihoddeg • New measuring system HEIDENHAIN LB 382 • Milling carriage general overhauled • New painting

Condition: excellent (used), mileage: 256,600 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, first registration: 02/2018, emission class: euro6, color: silver, number of seats: 5, Year of construction: 2018, Equipment: air conditioning, cruise control, navigation system, power assisted steering, = Additional options and accessories = - Rear-view camera - Electric windows - Disc brakes = Special notes = WDF44781313380745 = More information = Number of cylinders: 4 Engine displacement: 2,143 cc Unladen weight: 2,380 kg Payload: 745 kg Gross vehicle weight: 3,200 kg Technical condition: very good Optical condition: very good For more information, please contact Youri van Doorne or Timothy Schutter Hsdpfx Aexuvayjddong

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm Hnjdpfx Adjyaaa Asdjg diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Manufacturer: Desch, V-belt pulley pulley 4 grooves SPB 150x4 2517 Hsdopid A Uepfx Addsng -V-belt width: 17 mm -Receptacle: Ø 45 mm taper bushing 2517-45 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 155 x 80 mm -Weight: 5.9 kg

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Diameter: 507mm -Total width: 158 mm -Strap: 8 -V-belt width: 17 mm -Taper socket recording: Ø 70 mm (can be changed) -Pelt: balanced Hsdpfx Adect H T Tedong -Weight: 61kg -other pulleys in stock