Used Weber Cf 2 for sale (111)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Fjdjxu U Tropfx Ab Uspr Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 95.470.73, total width: 990 mm, total height: 1,950 mm, total length: 2,200 mm, grinding width: 600 mm, overall weight: 1,800 kg, grinding height: 150 mm, grinding belt length: 1,900 mm, grinding belt width: 650 mm, automatic aggregate adjustment (program-controlled), Aggregate 1: 15 kW, Aggregate 2+3: 15 kW, Aggregate 1: steel contact roller, Fpedpjx Ec E Defx Ab Uor Aggregate 2: rubber contact roller, Aggregate 3: air cushion sanding pad, Feed speed: frequency converter 2–12 m/min., Extraction diameter: 2x 120 mm, 3x 140 mm, approximately 15 sanding belts included

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Complete with controller Year - November 2022 Fpjdpfx Aotq E Rkob Uor In excellent condition

Condition: used, Year of construction: 2007, Technical details: Fpodpfx Abexp Hgts Uor x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min spindle taper: ISO: 50 rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW weight of the machine ca.: 25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL *

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole cylinder NW 600; small sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Double-jacket volume: 105.0 liters Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 9,000 mm Previous application: rapeseed oil TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil Fodpfxoxqb Rve Ab Uepr INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Note: dents in the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Heating/cooling system material: V2A 1.4301 (AISI 304) Foot material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 7 mm

Condition: good (used), functionality: fully functional, Offered is a Weber brand belt deskinner, Model: ASB 800, 400V, 16A, V2A. The machine is fully functional and ready for immediate use. Cutting width approx. 40 cm. The machine is in full working order and ready to operate immediately. Fodpfjxt Rptex Ab Uepr Further details available upon request. Payment by cash or advance bank transfer. Sale to businesses only, no warranty, no liability.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Fpedpfx Asua E H Seb Uor

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D Fpodpfxsuziyhj Ab Uor - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW - Up to 150kg/h profile - 230kg/h tubes Very good condition

Condition: used, Weber Skinner Model ASE 400 Fpedpewdyd Dsfx Ab Usr Year 2005 400mm stainless steel skinner roller CE approved

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Fjdpjxpu Tbsfx Ab Uopr

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of steel; handhole cover plated Inner diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: yes Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support type: ring Fpodpfx Aexqba Dob Ujr Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: Chemicals VESSEL Max. vessel operating temperature / °C: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole / dome: handhole Outlet: flange DN50 AGITATOR Agitator placement: centered in the top head Agitator configuration: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top wall thickness: 15.8 mm

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Fedsvgnhwepfx Ab Ujpr - Hydraulic pump.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Fedpfxoxghz Hj Ab Ujpr

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fpodpfxjxf Up Uj Ab Ujr Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Fjdpfx Aoxlcfkob Uspr Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Fpodpoqpft Isfx Ab Usr - Screw Ø: 65 mm - Working hours: 102.364

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm Fodpfx Asxqa Nwsb Uepr

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit Fpjdpow Dbkrofx Ab Uer -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200 Fsdpfx Ajtpg D Ujb Uopr

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Fedpfx Ajtpg Dnob Ujpr Propeller Ø: 75mm Working hours: 58,668

Condition: good (used), functionality: fully functional, Working from production, has always run with an 800 mm extrusion head for producing HDPE pipes. Fodpfxswr Db Nj Ab Uspr

Year of construction: 1991, operating hours: 32,000 h, condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report • One pair of non-original screws Fjdpfx Abjwaxuaj Uspr • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Fjdpevuzqzofx Ab Uopr Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Fpjdpfx Abjvryhyj Usr

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH Fpsdpfeq Tr Tbox Ab Ujr - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D