Cnc lathe

NAKAMURA TOME SUPER NTJ

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW Fodpfoxiy Ausx Abujpc weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control Fsdsx A E U Nopfx Abujpc 5 extra M-codes

Condition: ready for operation (used), Year of construction: 2007, operating hours: 18,179 h, functionality: fully functional, machine/vehicle number: B151707, turning length: 620 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 345 mm, distance between spindles: 970 mm, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis Travel X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° C-axis 1+2: 360° Main Spindle Maximum spindle speed: 4,500 rpm Power capacity - main spindle: 18.5 / 15 kW Fpedpfx Aexgpclobuec Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub Spindle Maximum spindle speed: 5,000 rpm Power capacity - sub spindle: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle traverse: 760 mm Upper Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower Turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Bore shank diameter: 32 mm Indexing time: 0.2 - 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret Tool Drive Spindle speed driven tool stations: 6,000 rpm Power capacity - driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter (bolt): 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Creep feed: 0 - 1,260 mm/min Feed rate C: 1 - 4,800°/min MACHINE DETAILS CNC control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main switch: 225 A Transformer voltage: 68.6 kVA Control voltage: DC 24 V Total power consumption: 77 kVA Operating Hours Spindle hours: 18,179 h Machine hours: 53,242 h Power-on hours: 99,999 h

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,212 h, functionality: fully functional, machine/vehicle number: B151104, turning length: 620 mm, turning diameter: 190 mm, travel distance X-axis: 345 mm, travel distance Y-axis: 45 mm, travel distance Z-axis: 1,240 mm, TECHNICAL DETAILS Max. turning diameter: 190 mm Max. turning length: 620 mm Chuck size: 165 mm Swing over cross slide: 190 mm Axes Travel X1/X2 axes: 345 mm / 167.5 mm Travel Z1/Z2 axes: 1,240 mm / 685 mm Y-axis travel: ±45 mm B-axis travel: ±91° Rapid traverse X1/X2 axes: 16 m/min Rapid traverse Z1/Z2 axes: 40 m/min Servo-controlled: 0.001° Hirth coupling: 1° Fjdpfx Ajw Hyi Sobuepc Spindles Spindle speed: 5,000 rpm for 51 mm (L/R) Spindle speed: 4,500 rpm for 65 mm (left only) Bar capacity, left spindle: 65 mm Bar capacity, right spindle: 51 mm Drive power left: 18.5 kW Drive power right: 15.711 kW Turrets Turret for driven tools: 12 positions Turret for turning tools: 24 positions Tool size (square/round): 25 mm / 32 mm Control: Fanuc 18 iTB MACHINE DETAILS Net weight: 12,500 kg Automatic operation hours: 16,212 h Feed hours: 8,392 h Control "on" hours: 27,816 h EQUIPMENT Spiral interpolation Left side air blast IRCO interface Collision monitoring NT Nurse NC kit Spindle speed correction switch for both spindles Work area lighting Automatic central lubrication for all axes Mobile coolant tank Door interlock Transformer CE marking Chip conveyor Coolant and air blast through right spindle 5 free M-function pairs Finished parts gripper G Parts catcher tray A for material remnants Polygon turning function Electronic handwheel Spann top chuck GR 65 modular A6 3-jaw chuck, right side

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar Fedpfx Aow Hxi Dobujpc + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 Fpedpfx Aew Dgcasbuoc

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Fpjdjwnd Dpopfx Abusc Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Fpsdpfx Ajur Hfzjbujc

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Fedpfx Ajwf Sfvjbuspc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. Fpsdpfx Aot Hwzisbusc • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract