CNC turning and milling center

Nakamura-Tome SC300

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Descriptionis and technical details are on photos. Isdpfjx I Rkpjx Ag Uoic

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Isdpfx Asyxpprjg Uoic Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. Iiedpfx Agjy R U Nze Ujc The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Iijdpfx Agjqvd Ius Ujc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Ijdpfx Aormkfnog Ueic Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Iodpfxjldgf Ho Ag Ueic Car weight: 6,200 kg Good technical condition Price EURO 13.000 + VAT Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Iiodoxu I Atopfx Ag Usc

Condition: good (used), Bar feeder LNS Isdpfx Aer Iygieg Ujic

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Iodjh Uqpvopfx Ag Usic Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 Iodov Tvkaopfx Ag Ujic approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.