PROMAC ZEPHYR VT 2.5 XL

PROMAC ZEPHYR VT 2.5 XL

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Dcsdpfeycln Djx Ag Rsf Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 1,380 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (max.): 108 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Speed range: 18,000 rpm Tool holder: HSK-63-A Tool positions: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary tilting table - Internal cooling (IKZ) prepared for 40 bar - Paper band filter - Chip conveyor Dcsdpfewu Evtjx Ag Rjf - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 17,797 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, number of slots in tool magazine: 32, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Dcedpsxf A E Rjfx Ag Ref Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)