Spotting press

Reis TUS 125 OK50

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours Lsdpfx Ahjt Hdh Ns Ujak The compressor is fully functional.

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Lsdpsdwf Dbofx Ah Uoak

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch Lodpfswc D Dxex Ah Ujak - Safety device - CE mark

Condition: good (used), Year of construction: 2017, APK 81 Lodpotddwuofx Ah Ueak Shaft 80MM digital hydraulic side rolls in very good condition

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Laodpfx Aeh T Ulyeh Uok Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations. Lasdpfog Ey Rfex Ah Usk

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Lajdpein Uilofx Ah Usk - any size of the working table

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Ljdpfxohvml Is Ah Ueak Main Drive Motor Power 80 kW Weight aprox 40000 kg

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Lajdpfx Aohq Uigsh Uek Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Laedevnd Sujpfx Ah Uok