Turning automatic lathe

STAR Micronics SR-20J II TYPE A

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, STAR SR20J II TYPE A Year 2023 Fsdpfxozqduke Aanjpp Fanuc CNC Control 32i model B 20mm Maximum Bar Capacity Y-Axis & C-Axis Capability Live Tooling ALPPS TOOL CO ASR X-20ASII BARFEEDER LNS Swarf Conveyor Very Low Hours Brass-Only Production Since New Selection of Tooling & Consumables Included Machine available near end september 2026

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Fpsdpeuz If Nofx Aanep Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Fpodszx Ur Nspfx Aanop

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Fedpex Avtcefx Aanjpp Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Year of construction: 2005, condition: ready for operation (used), - USED - 6-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 320 mm MAX TURNING DIAMETER: 32 mm SPINDLE: 200-8000 rpm; 3,7 - 7,5 kW COUNTER SPINDLE: 200-7000 rpm; 1,5 - 2,7 kW X1-AXIS TRAVEL: 108 mm X2-AXIS TRAVEL: 228 mm Y1-AXIS TRAVEL: 275 mm Z1-AXIS TRAVEL: 325 mm Z2-AXIS TRAVEL: 130 mm Z3-AXIS TRAVEL: 410 mm RAPID FEEDS X-Y-Z: 20 m/min DRIVEN TURRET HEAD: 8 POS; 200 - 5000 rpm CONTROL UNIT: CINCOM SYSTEM M6D BAR FEEDER: IEMCA Mod. BOSS 332 EVOLUTION WEIGHT: 2850 Kg ACCESSORIES: PARTS CATCHER Fodpfx Asvthv Ioanspp

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x  Stones and Flanches included Centre height: 647mm Fpodpfx Aajv Dia Aensp Grinding Ø: 1295mm Grinding length: 4267mm Grinding stone dimensions:914 x 152 mmmm Grinding stone speeds: 400 - 1200Rpm Cooling system: Yes Length: 8500mm Width: 4500mm Height: 3200mm Weight: 78000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 675149, center height: 175 mm, grinding length: 8,000 mm, center width: 1,000 mm, grinding wheel diameter: 450 mm, total width: 1,700 mm, total length: 3,000 mm, grinding diameter: 349 mm, workpiece weight between centers: 100 g, distance between centers: 1,000 mm, type of input current: three-phase, feed length X-axis: 320 mm, feed length Z-axis: 1,000 mm, overall weight: 3,500 kg, year of last overhaul: 2022, input frequency: 50 Hz, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 800 rpm, Dear Sir or Madam, Fpodpfx Aae Ahv T Henep The sale of this machine is strictly limited to end users located within the European Union (EU). Under no circumstances will the machine be sold to dealers, resellers, or intermediaries. Sales are exclusively intended for end users, manufacturing companies, and companies that will directly operate the machine. Control System Control system manufacturer: FANUC Control system type: GE FANUC Series 21i-T Work Area Center height: 175 mm Distance between centers: 1,000 mm Grinding length: approx. 800 mm Max. workpiece diameter: approx. 349 mm Electrical data according to your specifications Connection voltage: 3400 V Operating voltage: 3400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 20.5 A Main fuse: 25T A Grinding technology according to the documentation Grinding spindle power: 5.0 kW Grinding spindle speed: 800–1,900 rpm Grinding wheels: depending on the design, up to approx. Ø 450 mm X-axis resolution: up to 0.1 µm Workpiece spindle speed range: approx. 8–800 rpm Automatic indexing: provided for the UR version Further technical data from the manufacturer's documentation Max. ambient temperature: 40 °C Max. humidity: 75 % Sound pressure level: approx. 70 dB(A) Machine weight: approx. 3,500 kg Sale without tools and without additional accessories. The machine is sold exclusively with the described standard configuration. Inspection possible by appointment. Sale ex works Syntegon. Loading and transport are the responsibility of the buyer. Sales/transfer conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required. • Disassembly, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Year of construction: 2014, operating hours: 15,934 h, functionality: fully functional, Year 2014 Production hours : 15934 h Swarf conveyor LNS Predisposed for receiving HPpump LNS bar loader Express’220 Parts belt conveyor Fedpfx Aozmw E Ioanspp Fanuc command 321 Model B Transformateur

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Fedpfozmh R Ujx Aanjpp Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: used, grinding diameter / mm Fedpjzgipxjfx Aanspp grinding length 4000 mm swing diameter / mm