Eccentric press

WEINGARTEN

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Technical Data Itedpfx Agey I U U So Ujh Sheet thickness: 1.25 mm Bending length: approx. 2030 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Iodpfx Aextf A Ijg Usth Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: used, Manual guillotine shear Type: Weingarten TH Condition: Used Technical data Cutting width: approx. 1070 mm Iodpjy I U Acsfx Ag Uoth Sheet thickness: 1.25 mm

Condition: used, Year of construction: 1962, pressure 080 t throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm ram adjustment 80 mm power requirement 7,5 kW Itedpfsyq Smijx Ag Ush weight 5,1 t dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: excellent (used), Four side planer scm compact xl Itjdpelat Hdofx Ag Ueh - planing width 23cm - planing height 13cm -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm Itjdpfxsyq Sl So Ag Uoh passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1961, pressure 063 t Isdpfx Asvuuc Rog Ujth throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Itedpeg U Uv Rjfx Ag Ush Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t Itjdpfx Agjfx Hv Ho Uoh dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm) Itjdecxxwcepfx Ag Uoh

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm Itedpjcubatofx Ag Ush tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons Itodpfx Agsv Hqnae Ush KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Iodpovgbgasfx Ag Ujth Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Used Trumpf 5axis laser for sale / 3d laser for sale Used Trumpf 5axis laser for sale / 3d laser for sale Trumpf TLC Cut 5 Isdpfx Asfuah Neg Ujth Year 2006 Fully serviced twice a year by Trumpf Uk Last service January 2019 New vacuum pump fitted – 28/05/19 Hours: Beam on: 14,922 hours Laser on: 59,480 hours 3.2kw Fully serviced. Jigs / cutting beds included. Delivery and installation can be arranged.

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: Itsdpfx Aou Ic Avog Ujh 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *