Used welding tables for sale (593)

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time Cjdpfx Ajxabl Soa Hjgu - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch Cedpfx Aajxaatno Hjgu

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Cjdpfx Ajxaafqsa Hegu Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm Cgsdpfsymf Rtox Aa Hsu • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. Cgsdpfxsymf Urs Aa Hou The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: new, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 2000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. Cgodjymf R Hjpfx Aa Hsu All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm Cgedpsymf I Sofx Aa Hju weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process Cgsdpfx Aeymf H Uja Hsu • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm Cgsdsyv I Inspfx Aa Heu - Side panels: 150 mm - Panel thickness: 10 mm

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Csdpfx Aajyv I Hwo Hegu Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Csdjyv I Hdopfx Aa Hegu Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 80 Positionen weight 150 kg condition neu 28 mm dimensions 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Cgsdpoyv I Eyefx Aa Heu Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 10 Stk. clamping range 25 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m 10 Quick-release clamping bolts - 28mm hole system Cedpfx Aaeyv I Etj Hsgu - for 25mm table thickness

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm Cgedpfx Aaeyv I Eas Hsu dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm Cedoygxz Sepfx Aa Hogu 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION!!! Tools are designed for 25mm thick tabletops.

Condition: as good as new (ex-display), Year of construction: 2023, Motorized height adjustable tilt and turn table Cjdpfx Aaed H I Nfs Hogu Maximum load: 500kg Faceplate diameter: 600mm Stroke: 600m Operation: Foot switch and push button on control cabinet

Year of construction: 2022, condition: new, Turntable Cjdpfjgn Ecrsx Aa Hegu Load: 1.000kg (1.200kg horizontal) with a center of gravity of 200mm from the faceplate Faceplate diameter: 800mm with 4 T-slots Faceplate speed: 0.05-1.5rtm Torque face plate: 1,800Nm Tilt angle: 0-135 ° Welding current transmission: 800A Operation: Two-pedal foot switch and button on the switch cabinet

Condition: new, Year of construction: 2023, Hydraulic height adjustable rotary tilt table Maximum load: 1.000kg Faceplate diameter: 850 mm Speed of face plate: 0,05- 1,0 rpm length / width: 1.800mm / 1.450mm Height faceplate horizontal: 800mm - 1.275mm height faceplate vertical: 625mm - 1.100mm Operating devices: 2-pedal foot switch/ turn LEFT/ RIGHT hand-held remote control: Turn LEFT/RIGHT/STOP, speed controller (potentiometer) for stepless speed control, pushbutton tilt FORWARD/BACK, pushbutton lift UP/DOWN Operation at the control cabinet: Pushbutton "DEVICE ON Codpfx Aaeh T Dafo Hegu Selector switch "MANUAL/FOOT OPERATION Main switch "ON/OFF

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 1500kg- Own weight: 300kg- Insertable workpiece diameter: approx. 50 - 3000 mmm- Roll diameter: 250mm- Roll width 50mm - Rotation speed approx. 100 - 2,000 mm/min- Two-pedal foot switch potentiometer for stepless speed control Codpfx Aasd Iuqlo Hsgu

Year of construction: 2020, condition: new, Hydraulically height-adjustable tilt and turn table Maximum load: 2.500kg Cgedpfx Aasd H Hzbe Hju faceplate diameter: 1.200 mm Stroke:1,050 mm

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Codpfx Asd Iuqaoa Hogu

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm swivel range: 300 face plate diameter: 1.000mm Codpfx Aaefnku He Hjgu Welding current: 600A

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm Cjdpofxgp Uofx Aa Hogu faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min Cedpfsfxw H Asx Aa Hogu - Two-pedal foot switch - Potentiometer for infinitely variable speed control

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT Cgedpfoh Td Thjx Aa Hou - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT