Used horizontal band saws - manual - cutting range 221-299mm for sale (82)

Condition: used, Working mode: semiautomatic Todpfxeydp Udo Am Tsa Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: used, Pilous ARG 235 Plus Horizontal Bandsaw, Includes 4500mm x 800mm Infeed Roller Conveyor and 1300mm x 800mm Outfeed Conveyor. S/No. 123/19/0043. Country of Origin: Czech Republic Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Tjdpfx Amezn Uwds Tja

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off Todpfx Asga Tzqsm Toa * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw band

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Tsdjznh Nmjpfx Am Tsa Weight: 380 kg

Condition: used, Year of construction: 1992, cutting diameter 260 mm saw band length 3890 mm cutting width 340 mm cutting speed Stufenlos m/min total power requirement 2,4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,4 x 2,0 m Vice can be adjusted for angle cutting. Tedpju Rt Hdjfx Am Toa

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Todpfxog U Uv Re Am Tea Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length Tedpfsfk Ew Esx Am Tsa • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: ready for operation (used), Year of construction: 1982, Band saw with miter cutting device, manufacturer: HESKA, type: HSE 260, year of manufacture: 1982. The machine has been partially overhauled and includes a support stand, machine documentation, and a coolant system. Sawing capacity for round stock: max. 260 mm. Todpszictcofx Am Tsa

Condition: new, Technical data: Cutting range: round 0°: 255 mm square 0°: 200 x 200 mm flat 0°: 320 x 200 mm round 45°: 195 mm square 45°: 195 x 195 mm flat 45°: 195 mm round 60°: 125 mm square 60°: 125 x 125 mm flat 60°: 130 x 120 mm round -45°: 200 mm square -45°: 170 x 170 mm flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw band: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions L x W x H, approx.: 2000 x 1250 x 1900 mm Weight, approx.: 350 kg Features: - Double miter saw with a swiveling saw arm from -45° on the left to +60° on the right - Ideal for cutting tubes, profile material, and solid material made of stainless steel, iron, etc. in commercial applications - Generously sized cast saw arm for vibration-free operation - With 2 saw band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping Tedpfxjd R Sipj Am Tea - Precise, adjustable saw band guide for optimal cutting results - CE/IEC, German documentation and German service Scope of supply: - Saw band - Material stop - Manometer (band tension) - Saw band carbide guides - Vise with quick-release mechanism - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end stop - Base frame

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m Tedexc Nwujpfx Am Tsa coolant device

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Todpfxjzqrrwe Am Tja Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg PLEASE NOTE! This machine is a returned item; it is second-hand but in working order. NO WARRANTY!

Condition: used, Year of construction: 2026, The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. Tedpszp Elhofx Am Toa The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg PLEASE NOTE!! This machine is a return item. It has been used a little but is in working order. NO WARRANTY!!

Condition: used, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Tsdpfxezpx Ipo Am Tea Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg IMPORTANT NOTICE: This machine is an ex-display unit. It has been tested and is fully operational. NO WARRANTY.

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Tedpfx Amjfy Ttie Tja Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Condition: new, Year of construction: 2026, The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Tjdpfxjmrnk Ee Am Tea Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: new, Year of construction: 2026, The CORMAK MCB350HD Metal Band Saw is a professional-grade metal cutting machine designed for precise mitre cutting from -45° to +60°. Equipped with a heavy-duty cast iron saw bow and a gravity-fed hydraulic feed system, it is ideal for both small-batch and high-volume production. Its rigid construction and premium components enable efficient cutting of structural steel, stainless steel, tool steel, solid bars, pipes, and hollow sections. The machine is equipped with a quick-action vise lever, allowing fast and convenient workpiece clamping. Key Features Mitre cutting range from -45° to +60° – ideal for cutting pipes, profiles, and solid materials at various angles. Heavy-duty cast iron saw bow – provides exceptional rigidity, vibration resistance, and cutting accuracy. Precision blade guidance with carbide inserts – ensures accurate blade tracking while extending blade service life. Automatic shut-off after cutting – improves operator safety and reduces unnecessary power consumption. Gravity-fed hydraulic feed system – delivers smooth, continuously adjustable feed pressure throughout the cutting cycle. Construction and Technology The MCB350HD is built around a robust welded steel frame combined with high-quality cast iron components. The 25° inclined saw bow improves cutting efficiency while extending blade life. A durable worm gearbox drive system ensures reliable long-term operation, while the integrated blade tension indicator (dial gauge tension meter) provides precise blade tension adjustment for consistent cutting performance. The machine is also equipped with a blade cleaning brush, a closed-loop coolant system with electric pump, and a material stop with measuring scale, making repetitive cutting to identical lengths quick and accurate. Precision and Performance The CORMAK MCB350HD metal band saw offers two blade speeds of 36 and 72 m/min, allowing the operator to match cutting parameters to different materials. Precision blade guides featuring bearings and carbide inserts ensure straight, accurate cuts while minimizing blade wear. The coolant system delivers emulsion directly to the blade guides, improving cutting conditions, reducing heat generation, and extending tool life. Applications The MCB350HD is designed for manufacturing plants, metal fabrication shops, engineering workshops, and maintenance facilities where reliability, repeatability, and versatility are essential. It is suitable for cutting: Steel pipes Hollow sections Structural profiles Flat bars Solid round and square bars Stainless steel and other ferrous and non-ferrous materials Standard Equipment Blade cleaning brush Coolant system with pump and reservoir Material stop with measuring scale Bi-metal band saw blade Blade and gearbox safety guards Tsdei D Di Sepfx Am Tea Optional Equipment Roller conveyor table for material feeding Additional band saw blades Laser cutting line positioning system Technical Specifications Specification Value Blade dimensions 2950 × 27 × 0.9 mm Blade speed 36 / 72 m/min Minimum cutting diameter Ø 5 mm Minimum workpiece length 100 mm Vise base height 940 mm Total installed power 2.2 kW Drive wheel diameter 330 mm Overall dimensions (L × W × H) 2000 × 1330 × 2020 mm Weight 540 kg

Condition: new, Year of construction: 2026, The CORMAK HBS320 Metal Band Saw is a high-performance, professional cutting solution designed for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal stock. Its robust construction, wide mitre cutting range, and compatibility with material feeding systems make it a versatile metal band saw for both production and fabrication applications. Key Features Mitre cutting from -45° to +60° – allows bevel cuts in both directions without repositioning the workpiece. Powerful 1.5 kW motor – delivers consistent performance and cutting stability, even when processing hard materials. Cast iron saw bow – minimizes vibration, ensuring high cutting accuracy and long service life. Precision blade guides – equipped with bearings and carbide inserts to improve blade stability and extend blade life. Enhanced operator safety – protective guards and safety micro-switches stop the machine when required. Integrated coolant system – electric coolant pump improves cutting efficiency and assists with chip removal. Construction and Technology The machine features a welded steel frame mounted on a rigid base with an integrated coolant reservoir. The cast iron saw bow provides exceptional rigidity for the cutting assembly. Cutting is performed by a gravity-fed system with hydraulic cylinder feed control, ensuring smooth and consistent blade descent. A quick-action vise with a movable jaw allows fast and secure workpiece clamping. The machine offers two blade speeds, 44 or 88 m/min, together with infinitely adjustable feed rate control. Precision and Performance Thanks to its rigid blade guidance system, the HBS320 maintains excellent cutting accuracy even during continuous operation. The independent coolant tank and pump reduce cutting temperatures, improve cutting quality, and extend blade life. An automatic motor shut-off at the end of the cutting cycle helps reduce unnecessary wear on drive components. Applications The CORMAK HBS320 metal band saw is suitable for cutting: Structural steel Stainless steel Tool steel Copper Aluminium Plastics It is an ideal solution for metal fabrication shops, tool rooms, steel structure manufacturers, maintenance workshops, and custom production facilities. Tedpfx Aei D Dgwom Toa Standard Equipment Quick-action machine vise Hydraulic feed cylinder with adjustable descent speed Coolant pump with coolant tray and chip collection system Two-speed blade drive Safety micro-switch protection system Optional Equipment Roller table extension Technical Specifications Specification Value Maximum round cutting capacity (90°) Ø 260 mm Maximum rectangular cutting capacity (90°) 320 × 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Feed control Hydraulic cylinder Blade size 2740 × 27 × 0.9 mm Blade speed 44 / 88 m/min Vise height 920 mm Overall dimensions 1400 × 880 × 1550 mm Weight 280 kg

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Tsdpfx Aomtwktem Toa Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 230V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed Todpfoy Ty Dpox Am Toa - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Tsdpfx Aozgdbism Tea Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Cutting range – rectangular: 300 x 260 mm

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system – 0.06 kW electric pump for band cooling Tjdsficb Tjpfx Am Toa – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Todpfefibfgox Am Tja Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata, BIANCO 370 M.REVISIONATA e RIVERNICIATA. Tsdpfx Aszhuptjm Tsa

Condition: used, functionality: fully functional, SEGATRICE MANUALE usata BIANCO 370. Todjzhupaepfx Am Tsa

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Tedscuntzjpfx Am Tja Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment: - Horizontal clamping device - Length stop (600 mm) - Monitoring of saw blade tension, electromechanical - Chip removal brush - Coolant system - Operating manual