Used belt grinding machines for sale (124)

Condition: new, width of the strips 75 mm band length 2000 mm band speed 37 m/sec total power requirement 3 kW weight of the machine ca. 0,105 t dimensions of the machine ca. 1,2 x 0,5 x 1,0 m Belt sander with - Contact disc: 200 x 75 mm - Surface grinding table width 75 mm throughout. Ffodpjvblhkofx Aa Esw

Condition: new, width of the strips 150 mm band length 1220 mm dimensions of grinding wheel 225 mm work table: 150 x 400 mm Table tiltable up to 90 Grad table surface area 150 x 130 mm connected load frequency 230 V Fedpfxofhk T Hs Aa Eofw total power requirement 0,75 kW weight of the machine ca. 35 Kg dimensions of the machine ca. 650 x 360 x 400 mm

Condition: new, width of the strips 100 mm band length 915 mm Fsdoupxqwopfx Aa Eofw dimensions of grinding wheel 200 mm work table: 170x125 / 265x150 mm total power requirement 0,5 kW weight of the machine ca. 26 Kg dimensions of the machine ca. 0,6 x 0,5 x 0,3 m

Condition: new, width of the strips 75 mm Ffodpfx Aeupxg Eoa Esw band length 2000 mm band speed 30 m/sec total power requirement 3 kW weight of the machine ca. 70 t dimensions of the machine ca. 1,2 x 0,5 x 0,75 m Belt sander with - Contact disc: 600 x 75 mm

Condition: new, width of the strips 100 mm band length 1220 mm band speed 1140 m/min. 0,62 x 0,4 x 0,35 cm total power requirement 1,5 kW weight of the machine ca. 0,04 t dimensions 0,97 x 0,67 x 0,37 m Ffjdpfxsupxm Ee Aa Eow This machine can also be mounted without a base. Therefore it is suitable as a table belt sander. Base is included. Connection voltage 230 volts.

Condition: new, width of the strips 150 mm Ffsdpfx Aoupxl Iea Eew band length 2000 mm band speed 33 m/sec total power requirement 4 kW weight of the machine ca. 100 t dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Belt sander with - Contact disc: 600 x 150 mm

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,084 t Ffjdpfevcrnaox Aa Esw dimensions of the machine ca. 1x0,5x1 m New device

Condition: used, Year of construction: 2020, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,11 t dimensions of the machine ca. 1x0,5x1 m Demonstration unit, rarely used Fodpfxjvblayo Aa Eefw

Condition: excellent (used), Year of construction: 1990, Vertical Belt Sander TMUA Table size: Width 325 mm x Depth 210 mm Motor: 5,5 kW Fodpfx Aajx Hdxwe Eofw Band Length: 1800 mm Band width: 125 mm Voltage: 380 V Year of construction: 1990 - Machine in very good condition Width: 900 mm Depth: 900 mm Total height: 1600 mm Weight: approx 250 kg

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Ffsdpfsk D Ex Tjx Aa Ejw Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm If you have any further questions, please do not hesitate to contact us!

Condition: used, abrasive belt measures: 50 x 100 Ø mm Fodpfx Aeb Tcv Hsa Esfw engine: 380 V, 0,7 kW space needed: 650 x 550 x 1050 mm

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg Ffsdpfxjwvt I Ho Aa Eew

Condition: new, Year of construction: 2026, The CORMAK SM75DC belt grinding machine is a high-efficiency industrial metal belt grinder designed for professional metal surface processing where precision and effective dust removal are equally important. Thanks to the integrated extraction system, solid steel construction, and large working surface, the SM75DC model performs excellently in production plants and metal workshops, ensuring a clean and safe working environment. Main advantages of the machine Extraction system with 860 m³/h capacity – effectively removes dust and metal particles during grinding. Two belt speeds (14.5 / 29 m/s) – enable optimal adjustment of grinding speed to the material being processed. Stable steel base – provides rigidity and vibration damping, improving both working comfort and surface quality. Adjustable grinding angle with lock – allows precise positioning of the belt to the workpiece. Quick abrasive belt change system – minimises downtime during retooling. Spring-loaded belt tensioning system – ensures automatic and stable belt tension throughout the operation. Design and technology The CORMAK SM75DC belt grinding machine is designed for continuous operation under demanding industrial conditions. The rigid frame made of thick-walled steel, solid base, and precision belt-tensioning mechanism ensure both stability and long service life. The built-in dust extraction unit with two Ø100 mm nozzles significantly reduces workplace contamination and protects the operator. Precision and performance Equipped with a 75 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area for fast material removal and high-quality surface finishing. Two operating speeds (14.5 and 29 m/s) allow the operator to match the speed to the work material – from rough grinding of structural steel to fine finishing of aluminium or stainless steel components. Applications The stationary CORMAK SM75DC belt grinding machine is ideal for: production and industrial facilities, locksmith and welding workshops, surface preparation and finishing operations, deburring, weld grinding, and surface preparation before painting or galvanising. Standard equipment Stable steel base with adjustable tilt Abrasive belt 75 × 2000 mm Built-in dust extraction system with 0.55 kW motor Anti-spark and dust shields Tilting protective guard Technical data Abrasive belt dimensions (L × W) 2000 × 75 mm Belt speed 14.5 / 29 m/s Motor speed 1420 / 2840 rpm Main motor power 2.2 kW Extraction motor power 0.55 kW Extraction capacity 860 m³/h Extraction nozzle diameter 2 × Ø100 mm Power supply 400 V / 50 Hz Fodpsycqitsfx Aa Ejfw

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 440 V, grinding belt width: 75 mm, grinding belt length: 2,000 mm, overall weight: 100 kg, GIMS75 fine belt grinder, in mint condition. Mobile unit for effective on-site grinding work on the floor. Machine has only been used once. Ffsdpfx Aaeufl Sxj Eew - Comfortable working position thanks to upright working position. - Highly effective grinding and finishing of weld seams on the floor. - Smoothing and descaling of steel parts. - Continuously adjustable drawbar position. - Small wall clearance. - Depth stop. Rated power: 4 kW Voltage: 3 x 400/440V 50/60Hz No-load speed: 3,000 rpm Belt dimensions: 75 x 2,000 mm Weight: 100 kg Pickup in 56626 Andernach, Germany, or delivery is possible upon request and at the buyer's expense.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. Ffjdpfstwb U Aex Aa Ejw The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Fjdpfx Aasv S Sr Ro Ejfw Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: used, Year of construction: 1950, width of the strips 150 mm band length 6680 mm volt 380 V weight 800 kg dimensions of the machine ca. 3,2x1,6x1,75 m Wood surface sanding machine Ffodpjua Ivcsfx Aa Eew Carriage length: table size 2500 x 800 mm Belt length: 150 x 6680 mm Manual processing table, adjustable Table height adjustable

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted Ffsdpfspgmufsx Aa Ejw

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz weight: 90 kg Fedspgmtzepfx Aa Eofw Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: new, Year of construction: 2025, NEW MACHINE Fodjrwx Hnjpfx Aa Eefw please ask for daily updated price! We will make you an individual offer!

Condition: new, Year of construction: 2025, NEW MACHINE Fodpfx Asrwx Itoa Eefw please ask for daily updated price! We will make you an individual offer!

Condition: new, FC120 ZK flat finishing machines were developed thinking in simplicity of operation whenever flat bars, rectangular tubes or flat elements need to be belt finished or polished. These machine enable the work up to 120 mm width with a range of 3 possible combinations of belt heads and brushes. FC120 ZK combines the abrasive belt head (Z) with an abrasive brush (K). Abrasive belt head: Finishing and removing imperfections of square of rectangular tubes, flat bars or any flat component. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube - also flat bars finishing. Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. NS Máquinas can supply different conveyor solutions in order to grind small items. Technical Details - FC120 ZK Working capacity (Ø mm) 120x120 No. belt stations (Z) 1-2 No. brush stations (K) 0-1 Abrasive belt dimensions (mm) 120x1850 Abrasive brush dimensions (mm) 120xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 12 Abrasive belts motor per head (kW) 3 Ffsdpod Ix I Aefx Aa Esw Abrasive brush motor per head (kW) 2.2 Feeding motor (kW) 0.25 Total power (kW) 5.5 (ZK) Consumption (A) 12 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1450x800x1800 (ZK) Weight (kg) 500 (ZK)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Fedpjqk Uyaofx Aa Eofw

Condition: excellent (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input current: 16 A, grinding width: 75 mm, Centerless belt grinder for round tubes, GRIT GX752H + GCX + GXW - including tube support - Incl. coolant container for wet grinding - including sanding area with surface belt - mobile, on a base with wheels Fjdpfoucq Dnsx Aa Esfw

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Ffjdpfx Aod Hfnbja Eew Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250