Used CNC turning and milling centers for sale (566)

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images Fjdpfx Aoz Ia Rgjl Sogh 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar Fgjdpfx Aoz N H Enel Ssh X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK Fgsdjz N Dflspfx Al Sjh TAILSTOCK SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Fsdpfx Aloz N A Avo Sogh Toolholders, Transformer

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Fgsdpjz Ehvfofx Al Sjh Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: used, Year of construction: 2017, Citizen Miyano BNA-42MSY2 Fixed Headstock Lathe 7 Axis Machine with Cincom/Citizen CNC Control, Twin Spindle Collet Chucks, 8 Position Tool Turret all Driven, Max Work Piece Diameter 42mm, Main Spindle Speed 50 - 5000rpm, Sub Spindle 50 - 5000rpm, Parts Catcher & Conveyor, LNS Turbo MH500 Swarf Conveyor. S/No. DL0110 (08/2017) 3000kg, Iemca Boss 552-HD 5 meter Barfeed. S/No. 021805GA03 (2018). Selection of Driven & Static Tooling for BNA42. Country of Origin: Japan Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Fedpfx Ajz Arncjl Ssgh

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, Fgsdpfxezwm Hpe Al Soh main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Fgodpfxoz A Huhs Al Seh Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Milling spindle speed: up to 12,000 rpm MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Chip conveyor Documentation, if available Coolant system Fgsdpfez Inaiox Al Ssh Tool changer: automatic

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, Fgodpfx Alszt Spno Sjh bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: used, Correa Model 17D CNC Bed Type CNC Milling Machine, NEW 2002 HEIDENHAIN TNC-426 CNC Control X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper ISO 50 Speed range: 20 - 3000 rpm Fedpfx Alezmyurs Sogh Spindle power: 17 kW

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Fodpsz Ibaiofx Al Sogh Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Fodpfxjydigmo Al Sjgh Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Fodpfx Ajz Ndu Ejl Segh About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 1998, operating hours: 116,213 h, functionality: fully functional, turning length: 1,035 mm, turning diameter over cross slide: 560 mm, turning diameter: 410 mm, spindle motor power: 26,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 88 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, mount diameter: 50 mm, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 1,500 rpm, rotational speed (min.): 90 rpm, type of input current: three-phase, torque: 96 Nm, workpiece weight (max.): 200 kg, feed rate X-axis: 5 m/min, feed rate Z-axis: 5 m/min, total height: 2,580 mm, total length: 4,330 mm, chuck outer diameter: 304 mm, total width: 2,240 mm, quill stroke: 130 mm, quill diameter: 100 mm, spindle nose: A2-8", overall weight: 6,700 kg, spindle diameter: 304 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Yamazaki Mazak SQT-30M, model MAZAK SQT30M, manufactured in 1998. Model: SQT-30M Serial number: 138094 Date: 98-08 Fjdpfx Ajz A Aygjl Ssgh Weight: 9500 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Machine type: CNC Turning/Milling Center / Multitasking Fsdpfjyuucnjx Al Sjgh Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Year of manufacture: 1999

Condition: like new (used), Year of construction: 2021, operating hours: 1,400 h, CNC turning machine MT RENT T25FSY Year of manufacture: 2021 Control: SIEMENS 828 D Operating hours: 1400 h Technical data: * Year of manufacture: 2021 * Control: Siemens Sinumerik 828D * Operating hours: approx. 1,400 h * Max. swing diameter over bed: 600 mm * Max. turning diameter: 460 mm * Max. turning length: 558 mm * X-axis travel: 310 mm * Z-axis travel: 620 mm * Y-axis travel: 110 mm / ±55 mm * B-axis travel / counter spindle: 650 mm * Spindle bore: 77 mm * Max. bar diameter: 65 mm * Main spindle speed: max. 4,500 rpm * Counter spindle speed: max. 4,500 rpm * Main spindle motor: 23 kW * 12-station BMT-60 tool turret * 12 driven tool stations * Tool shank: 25 × 25 mm * Max. drilling bar diameter: 40 mm * Hydraulic working pressure: 40 bar Equipment: * Y-axis * C-axis * Counter spindle * Driven tools * BMT-60 turret * WTO / QuickFlex tool holder * Bar loader * Chip conveyor * Hydraulic 3-jaw chuck * Coolant system * Workpiece/part catcher * Foot pedals * Flat guides Fgjdpez I R Sbofx Al Sjh

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle diameter: 60 mm, We are selling our INDEX G200. The machine is in excellent condition and can be inspected while powered on. It is being sold including a bar feeder, chip conveyor, and various tools. Fsdpfx Asz I Rxnjl Sogh The machine has only been operated with oil. The machine has X/Y/B axes!

Condition: good (used), Year of construction: 2013, operating hours: 1,561 h, functionality: fully functional, General Information Description Specification Manufacturer MAZAK Model Quick Turn Smart 200 CNC Control Mazatrol Smart Year of Manufacture 2013 Serial Number 249187 Total Operating Hours 11,755 hours Cutting Hours 1,561 hours Network Connection LAN Condition Very good technical condition, clean, accurate and exceptionally well maintained 2. Machining Capacity & Working Area Description Specification Maximum Swing Diameter 530 mm Maximum Swing Over Cross Slide 343 mm Bar Capacity 65 mm Spindle Bore 76 mm X-Axis Travel 195 mm Z-Axis Travel 560 mm X-Axis Rapid Traverse 30,000 mm/min Z-Axis Rapid Traverse 33,000 mm/min 3. Spindle & Tooling Description Specification Maximum Spindle Speed 5,000 rpm Spindle Motor Power 15 kW Selectable Thread Start Position Yes Through-Tool Coolant Yes Tool Turret 12 stations Turret Indexing Time 0.17 seconds per station Tailstock Automatic, MT5 Tool Measuring Arm Included Parts Catcher Included Robot Interface Additional M-function (1 pair) Smartshift BASE Quick-Change System Included Chuck SMW AUTOBLOK Collet Chuck 4. Integrated Automation – Universal Robots UR5e Collaborative Industrial Robot (Cobot) Description Specification Manufacturer Universal Robots Model UR5e Year of Manufacture January 2021 Robot Type Collaborative Robot (Cobot) Usage Demonstration use only Payload 5 kg Reach 850 mm Repeatability ±0.03 mm Working Envelope 2.6 m³ Maximum TCP Speed 1,000 mm/s Joint Speed 180°/s Robot Weight 21 kg Mounting Options Floor, ceiling, wall or angled mounting Power Supply 100–240 V AC Power Consumption Approx. 200 W Controller UR e-Series Control Box Programming URScript and graphical block programming Fgjdpjz Nyn Njfx Al Soh Safety Standards ISO 10218-1, ISO/TS 15066, PLd Category 3 Fieldbus Communication PROFINET, EtherNet/IP, Modbus TCP Digital I/O 16 inputs / 16 outputs Analog I/O 2 inputs / 2 outputs Tool Flange ISO 9409-1-50-4-M6 5. Robot Integration with Mazak Smart 200 The UR5e robot is fully integrated with the Mazak Quick Turn Smart 200, providing a complete automated machining solution. - Smartshift BASE quick-change coupling system - Additional M-function for robot interface - Pre-programmed automation sequences - Quick switching between manual and robotic operation - Video available showing the robot and machine operating together - Fully tested and used in production - Complete robot and machine integration 6. Machine Condition The machine is reported to be in excellent technical and operational condition. - Fully operational and functioning correctly - No active alarms or critical faults - Smooth movement on all axes - Spindle runs smoothly without abnormal vibrations - Linear guides and ball screws in good condition - Hydraulic and pneumatic systems functioning normally - Regular in-house maintenance performed - Lubrication system operating correctly - Primarily used for light machining of aluminium and plastic components - Robot and CNC machine fully integrated and tested 7. Documentation Available - Machine photographs - Video of machine operation - Complete machine manuals - Electrical diagrams

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to the closure of the business, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is for sale. The machine is very well equipped – 3-jaw chuck for the main and counter-spindle, collet chuck Hainbuch for the main and counter-spindle, parts catcher, prepared for a bar feeder, chip conveyor. High-pressure pump, 12 powered tool stations VDI30. Control system: Fanuc 21 I-TB series. Numerous accessories are included, such as turning tool holders and powered tools. Fodpfey S R Atsx Al Sjgh The machine is still connected to power and can be inspected by arrangement. Price includes loading onto a truck (FCA).

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW Fedpfx Aexrnwlsl Sogh SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center 5-Axis (4 + 1 Positional) Variaxis J-500 Model Year 2013 Mazatrol Matrix Nexus 2 CNC Fedpfszxpv Nsx Al Ssgh

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Fgedsx Sauljpfx Al Soh

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, Fodpfxozg Efio Al Ssgh 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included Fgjdpfszpd Alsx Al Seh The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.