Used CNC turning and milling centers for sale (571)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Tedpfx Ajw Dfhuebusd

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Todpfxozdrzxo Abusd Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Tedpfxszkgqze Abuod Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: repair required (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 65123, For sale: Mazak QT 10N with Knoll chip conveyor. The machine and chip conveyor are functional, but the X-axis needs to be overhauled and is currently not in operating condition. Tsdown D Nfepfx Abuod The price is a fixed price and non-negotiable.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] Tjdpswd Ud Ejfx Abued - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 12249 [h] - Number of working hours : 1816 [h] EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank - Parts catcher - Parts conveying strip - Electric transformer

Condition: used, Year of construction: 2023, operating hours: 4,500 h, functionality: fully functional, Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control system: DMG Mori Celos with Fanuc F31iB5 Todpfx Abozzquxouod The machine is in excellent condition and ready for inspection under power.

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Tedpfjzv Tbqsx Abujd Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm Tsdpfx Abjzwvv Touod X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, x-travel 750 mm Tjdpfx Abey Spuusujd y-travel 210 mm z-travel 1150 + 100 mm control Fanuc MSX-701III Maximum turning diameter 660 mm Max. turning length 1498 mm Diameter over cross slide max. 400 mm number of spindle speeds 3000 U/min tool piece magazine with 40 Plätzen turret 10 Fach total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles Todpfx Absyuc Apjusd • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Tedoy Hk Niopfx Abujd Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Tedpfx Aoyux S Hobued

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Tjdpfjy Hty Dex Abujd • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm Tedjy A Nf Iepfx Abuod X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,770 h Power-on hours: 10,820 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron Tsdpfxjzi Da Re Abujd - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Tedpjzimqxefx Abuod

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Tjdezf H Ezjpfx Abued Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: excellent (used), Year of construction: 2001, EMCO PCMill 300 PC-840D/TM02 Year of manufacture: 2001 Todpfx Aszx D Dhobusd F5DP4381

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Year: 2019 Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Tedpfx Ajzxxh Ujbued Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm Todpfx Abezd Dizeusd • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 370 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 380 / 615 [mm] - Y stroke : 105 [mm] - Rapid traverses rates (X/Y/Z) : 40.000 / 40.000 / 50.000 [mm/min] - B Axis stroke : +/- 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : CAPTO C5 - Spindle speeds : 12000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 TAILSTOCK - Tailstock type : Numérique - Type of cone : CM4 - Tailstock stroke : 815 [mm] POWER SUPPLY - Total installed power : 39 [kVA] EQUIPMENT - CNC : FANUC 31iB5 - Electronic handwheel Tedpfx Ajy I Di Esbujd - Coolant tank - Filtration : ECODE IP 600 C - Chips conveyor : MAYFRAN CS 1 - Oil mist extractor - Tool probe : Renishaw - Workpiece probe : Renishaw - Collet chuck - Chuck 3 jaws

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 810 mm, number of axes: 8, This 8-axis MORI SEIKI NZ-2000/T2/Y2 was manufactured in 2008. It features a twin-spindle design with a maximum Z-axis travel of 810 mm and X-axis travel of 210 mm. The machine is equipped with two turrets, each with 16 stations, suitable for complex multi-process turning and milling operations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NZ-2000/T2/Y2 turn-mill centre we have for sale. Contact us for further details. • Control/NC • Control unit: MORI SEIKI MSX-701 • NC system: FANUC FS-31iA (MAPPS 3); MAPPS version: 3 • Software/features: Load monitor; Tool life management; Number of stored programs: 250; User memory: 50 MB; Tool offset pairs: 99; Custom macro variables: 600 • Languages: NC and MAPPS screens in Italian • Electricals/destination • Voltage: 380–480 V; Frequency: 50 Hz; Destination: Europe • Machine configuration • Bed length: 800 mm • C-axis on both spindles • 2 turrets with X-Y-Z axes • Both turrets originally equipped with live tooling • Lower turret live tooling currently NOT working (turning functions OK) • Suitable for complex multi-process turning and milling • Spindles • Main spindle (Spindle 1) • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Sub spindle (Spindle 2) • Power: 25/22 kW; Speed: 5,000 rpm • Through-hole diameter: 73 mm • Chuck type: Hollow chuck 8"; Chuck through-hole: 65 mm; Chuck manufacturer: KITAGAWA • C-axis: Included; Spindle orientation: Included (without lock); C-axis brake: Included • Axis travels • B: 810 mm • Max. distance between spindle noses: 1,130 mm • Turrets • Turret 1: Axes X-Y-Z; 16 stations; Milling function included; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Turret 2: Axes X-Y-Z; 16 stations; Milling function present but NOT working; Rotary tool speed: 6,000 rpm; Tool mounting: By bolts • Backward tool max lengths: 155 mm (upper turret), 100 mm (lower turret) • Tool presetting • Spindle 1 in-machine tool presetter: Manual (detachable) • Spindle 2 in-machine tool presetter: Manual (detachable) • Coolant/chip (machine-integrated) • High-pressure coolant system: 635 W / 1040 W • Coolant type: Water-soluble • Through-spindle air blow: Included • Chip disposal direction: Right • Interfaces • Bar feeder interface: Included (Multiple-bar feeder specification; LNS) • Robot interface: Included • Languages/documentation • Manuals: Italian • Documentation: Installation, Operation, Maintenance manuals; Declaration of Conformity; CE Certificate • Important note • Lower turret motorized tooling function faulty on both machines. T2 turret currently usable only for turning operations. Additional equipment • Automation/handling • RR Robotica loading portal (included) • Loading pallets (included) • Work loader (Spindle 2 side) • Workpiece ejector Tjdpfezbkh Tjx Abuod • Work unloading conveyor • Part receiver • Custom upper door hatch for portal loading/unloading (non-original) • Chip/coolant peripherals • Drag-type chip conveyor • Coolant tank with washing pumps • Additional non-original 20 bar high-pressure pump • Workholding and tooling • Main spindle and sub spindle chucks included (KITAGAWA 8" hollow) • Fixed tool holders: 8 total (4 upper + 4 lower) • Driven tool holders: 2 axial, 2 radial • Electrical/other • External machine transformer • Signal light tower: 3-tier (red / milky white / green)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons Tjdpfxsw Hg Nlo Abusd EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. All tools and accessories are included. Tjdpfjxcwdvex Abusd Inspection possible by appointment.

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, Tedsx Emvijpfx Abuod The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT