Used machining centers (vertical) X-axis travel 1200-1699mm for sale (204)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Kledpfx Ajzlh S Aoifjw Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, DAHLIH VERTICAL MACHINING CENTRE MODEL MCV 1450 CONTROL FANUC 50 TAPER SPINDLE Kledpfjznm Uuex Aifew TABLE SIZE 1600 X 800 TRAVELS - 1450 X 750 X 750 MM TABLE LOAD 2000 KGS GEARED HEAD SPINDLE MOTOR 15 KW ATC MACHINE WEIGHT 14.5 TON

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Kledpfx Aijv Ax Uysfjw Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Kledpfx Aijzh I Ebofow Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,500 kg, table length: 1,400 mm, table width: 600 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 17 W, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 1200 Machining Center – available immediately The LAGUN L 1200 machining center stands for high precision, robust design, and economical production. Ideal for the production of individual parts as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 16" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Kedjvn Eqxopfx Aifslw Preparation for the integration of a 4th axis (rotary table optional) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Numerous reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg Klodpfxezgwq De Aifsw SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,620 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 1,050 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, total height: 4,073 mm, total width: 4,758 mm, table load: 4,000 kg, overall weight: 32,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 54,000 W, number of slots in tool magazine: 60, tool weight: 20,000 g, product length (max.): 5,301 mm, number of axes: 5, This 5-axis EUMACH UMC-1600 was manufactured in 2020. It features an impressive X-axis travel of 1,620 mm, Y-axis travel of 1,260 mm, and Z-axis travel of 1,050 mm. The machine includes a robust table diameter of 1,320 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the EUMACH UMC-1600 vertical machining centre we have for sale. Contact us for further details. • CE certification: YesTravels and feeds • B-axis swivel range: +10° to −190° • C-axis rotation: 360° • Rapid traverse X/Y/Z: 24 / 24 / 24 m/min • Cutting feed X/Y/Z: 20 / 20 / 20 m/minRotary table (C-axis) • Table diameter: Ø1,320 mm • Max table speed: 30 rpm • Minimum indexing increment: 0.001° • Drive: Direct-drive torque motor • T-slots: 13 slots, size 18H, pitch 100 mm • Table height from floor: 1,085 mmSwivel head (B-axis) • Drive: Direct-drive torque motor • Swivel time vertical ↔ horizontal: 3 s • Swivel range: +10° / −190°Spindle • Power S1/S6: 37.4 / 54 kW • Torque S1/S6: 170 / 390 Nm • Front spindle bearing diameter: 100 mm • Spindle centre to column: 1,105 mm • Spindle taper: Pending confirmation (documentation lists HSK-A100, BT, CAT, SK50 as possible)Working distances • Vertical spindle nose to table surface: 150–1,200 mm • Horizontal spindle centre to table surface: 100–1,150 mm • Vertical spindle nose to table centre: −300 to 960 mm • Horizontal spindle centre to table centre: −250 to 1,010 mmAutomatic tool changer • Type: Cam-arm • Max tool diameter: Ø150 mm • Max tool length: 350 mm • Tool exchange position: HorizontalGuideways and ball screws • Linear guide size X/Y/Z: 55 / 55 / 55 mm • Number of guide rails X/Y/Z: 4 / 2 / 2 • Number of guide blocks X/Y/Z: 8 / 4 / 6 • Ball screw diameter X/Y/Z: Ø55 / Ø55 / Ø63 mm • Ball screw pitch X/Y/Z: 16 / 12 / 12 mmElectrical data • Voltage: 400 V • Frequency: 50/60 Hz • Connected load: 80 kVAOutline drawing confirms installation dimensionsIntegrated features/options • Simultaneous 5-axis machining • Direct-drive B-axis swivel head • Direct-drive C-axis rotary table • HEIDENHAIN iTNC 530 HSCI control with RS-232 interface • Linear scales on X, Y, Z axes • Rotary encoders on B and C axesPending confirmation (machine info) Klodpeznl E Ejfx Aifow • Exact spindle taper • Operating hours • Spindle hours • Confirmation that the 60-tool magazine and all listed equipment are installed on this specific machine Additional equipment • Chain-type chip conveyor • Two screw-type chip augers • Full splash guard with roof (enclosure) • Programmable coolant system • Spindle air blast • Spindle water cooler (chiller) • Work light • Machine status light • Machine and control manuals • Toolbox • Approx. 40 HSK-100 tool holders included with the machine.Pending confirmation (accessories) • Coolant through spindle (CTS) • Touch probe (workpiece probing) • Tool measurement system (tool setter) • Complete list of included tool holders and accessories

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Kledpfeyy Npnox Aifjw Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, Klodpfezcy Irox Aifjw 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: used, Year of construction: 1998, Mazak 3-axis vertical machining center available for immediate delivery. In good working condition with chip conveyor, synchrotapping and cooling through the spindle. Viewing possible upon appointment. FYI: second identical machine available at the same location in West-Flanders (Belgium). X-travel 1,660 mm Y-travel 510 mm Z-travel 510 mm Table dimensions 2,000 × 510 mm Maximum table load 1,000 kg Spindle taper BT40 / ISO40 Spindle speed 40 – 7,000 rpm Main motor approx. 11 kW Tool magazine 2 × 24 = 48 tools Max. tool length 350 mm Max. tool weight 8 kg Max Tool Diameter Ø 80 mm (110 mm if adjacent position is empty) Rapid traverse X/Y 24 m/min Rapid traverse Z 20 m/min Machine weight 7,320 kg Kodpfx Aezldbaoifolw Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Kledoznh Ddspfx Aifew Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, Kljdszbkm Njpfx Aifow through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: i series, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details. Kljdpfszlg Icsx Aifew • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,500 × 670 mm • Spindle motor power: 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle head cooling system • Tool magazine type: geared driven • Tool holder type: BIG PLUS BT40 • Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • Program capacity: 1,000 programs • AICC II – 200 blocks • iHMI Easy Operating System (EZI & Machining Cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle air curtain • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) Ksdpfxjzlg Ams Aifelw • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm Kedpfsy Tbtlox Aifslw spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, Year of construction: 2014, operating hours: 3,600 h, functionality: unexamined, Agie Charmilles / Mikron VCE 1600 Pro CNC machining center Manufacturer: Type: VCE 1600 Pro Year of manufacture: 2014 Ksdpfx Aiezmh Nqefslw Operating hours: see photos Further information available upon request.

Condition: excellent (used), Year of construction: 2005, Hartford VMC 1270 A Year of manufacture: 2005 Control system: - Fanuc - Electronic handwheel Kjdpfx Aieznbn Ajfelw Main spindle: - Spindle speed max. 8000 RPM - Tool holder BT40 Travel distances: - X - 1270, Y - 600, Z - 725 mm Tool changer: - 25 magazine positions Table: - Clamping area 1370 x 600 mm Cooling: - Internal coolant supply 20 bar - Chip conveyor Delivery time: - Immediate

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technische Details x-Weg 1200 mm y-Weg 600 mm z-Weg 600 mm Steuerung Heidenhain iTNC 530 Spindeldrehzahl: 6000 1/min. Spindelaufnahme 50 SK Spindelmotor (S1) 10 kW Klodpfx Aozilzieifjw Tischaufspannfläche 1300 x 600 mm Tischbelastung 1200 kg Vorschubgeschwindigkeit 1-10000 mm/min Eilgänge x/y/z 20/20/15 m/min Abstand Tisch-UK-Spindel 125-725 mm Gesamtleistungsbedarf 25 kVA Maschinengewicht ca. 7,5 t Abmessungen Maschine 3600 x 2300 x 3000 mm Zusatzinformationen Ausstattung: * CNC Bahnsteuerung Heidenhain iTNC 530 * elektron. Handrad * Spindelölkühler * Werkzeugwechsler 24-fach, Doppelarmwechsler - Max. Werkzeugdurchmesser 80/150 mm - Max. Werkzeuglänge 250 mm - Max. Werkzeuggewicht 8 kg * Vorbereitung für hydraulischen Maschinenschraubstock * Vorbereitung für 3-D Messtaster * Späneförderer * Kühlmittelanlage, IKZ 20 bar * Maschinendokumentation Betriebsstunden (Stand 01.11.2024): - Steuerung ein: 60.818 h - Maschine ein: 59.598 h - Programmlauf: 22.283 h - Spindel ein: 19.522 h

Condition: used, Year of construction: 2001, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: 810D, total height: 2,830 mm, total length: 2,200 mm, total width: 2,650 mm, overall weight: 7,500 kg, input voltage: 380 V, type of input current: three-phase, In this advertisement, we are offering two machines for sale: a used Quaser MV204II vertical machining center, manufactured in 2001, and a used DMC 103V, manufactured in 1988. Both machines are not fully functional! Kljdpjzl T H Sofx Aifjw Quaser Model: MV204II Serial number: 120J430 Control: SIEMENS 810D Date of manufacture: February 2001 Gildemeister Model: DMC 103 V Serial number: 2886-0193 Initial inspection date: 29.06.1988 Operating hours: approx. 9200 If you have any questions or require further information, please do not hesitate to send us a message or call us. The price listed in this advertisement applies to both machines together; dismantling and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, FOR SALE HAAS EC-1600 Horizontal Machining Center Exceptional condition – Year 2022 – Available immediately This state-of-the-art machine is ideal for machining heavy and large parts. Commissioned in October 2022, it has been used very little and has been rigorously maintained according to the manufacturer's standards. Technical specifications: - Model: EC-1600 (Generation 10/2022) - Axis travels: X: 1,626 mm | Y: 1,270 mm | Z: 1,016 mm - Table dimensions: 1,626 mm x 914 mm Ksdpfx Aijyzb S Defelw - Maximum load capacity: 4,536 kg - Spindle: ISO 50 - Usage: 3,000 hours - Power supply: 440 V / 3 Phase / 50-60 Hz (35 Amps) 1,300 hours €70,000 The equipment is ready for shipment. I am at your complete disposal for any further information or to coordinate transport logistics. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,300 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, table load: 1,000 kg, spindle speed (max.): 9,000 rpm, number of axes: 3, This 3-axis Cincinnati MAG CFV1300i was manufactured in 2010. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 540 mm, and Z-axis travel of 720 mm. The machine includes a maximum table load of 1000 kg and a maximum spindle speed of 9000 rpm. If you are looking to get high-quality machining capabilities, consider the Cincinnati MAG CFV1300i vertical machining centre we have for sale. Contact us for further details. Klsdpfx Ajzkriioifjw • Internal cooling: yes • Number of places in the magazine: 24 • Accessories sold with the machine: 4 pcs of hydraulic vices • Accessories sold with the machine: tool holders approx. 24 pcs SK 40, both used • Latest replacements/investments/repairs: new spindle + replacement of backup battery in 02/2026

Condition: excellent (used), Year of construction: 2014, Traverses XYZ: 2040 x 762 x 661mm, table size 2250 x 800mm, Table load 2,000kgs, Heidenhain TNC 530 Control, BT40 spindle taper, 48 station tool changer, Ksdpfx Aioy U Ih Esfjlw Spindle speed 12,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 11,000 kg, table length: 1,700 mm, table width: 620 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 1,300 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 1600 Machining Center – Available Immediately The LAGUN L 1600 machining center stands for high precision, robust design, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: Ksdpfshy Atiox Aifelw ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and leasing options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with their reliability, ease of maintenance, and low operating costs. Technical features: Control system: HEIDENHAIN TNC 7 control system HEIDENHAIN 16" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Numerous reference machines available in Germany Contact us – we will be happy to advise you and prepare a customized offer.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details. • Table dimensions: 1372 x 610 mm • Rapid traverse speed: 18,000 mm/min • Spindle motor power: 30 hp • Tool magazine capacity: 20 positions • Tool change time: 4.2 sec • USB port • 3-color status light Kljdpszibu Sofx Aifew • Through-spindle coolant Additional equipment • Tool probe • Renishaw wireless workpiece probe • Chip conveyor • Set of tool holders • Documentation Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Kljdpfx Aisziaggefsw Technical Specification Taper Size BT 50