Used machining centers (vertical) X-axis travel 700-799mm for sale (232)

Condition: used, Year of construction: 2010, X axis: 700mm Prodpfx Asx Hypxeh Uof Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Spindle oil chiller Through spindle coolant Floor space W x D (mm) 2,235 x 2,420

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations Prodpfx Aow Nklhjh Uof - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2017, Machine has 1,350 spindle hours and 7,000 power-on hours, Predpfxsx Ezk Uj Ah Ujf Haas VF 3 with 4 axes, Year of manufacture: 2017, Control: Haas, Travel X/Y/Z: 1016/508/635 mm, 24-position tool changer, Taper: SK 40, Table size: 1219 x 457 mm, Spindle speed up to 8,100 rpm, 4th axis HRT 310 with tailstock, Max. table load: 1,588 kg, 3D measuring probe, Renishaw probe,

Condition: used, x-travel 760 mm Pjdpfx Ahsxxb I Do Uorf y-travel 410 mm z-travel 500 mm

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Psdpfx Ahjxwxc Ao Ujrf Weight kg: 6870

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; Pedpjx Ncpgefx Ah Usrf spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering this used Haas VF-3 vertical machining center, year of manufacture 2015. If you have any questions or require further information, feel free to send us a message or call us. Psdpfx Ahjx Ivf Sj Uerf

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) Pedjtrhq Hjpfx Ah Uorf - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2012, functionality: fully functional, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 16 kVA, torque: 95 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,100 kg, table width: 500 mm, table length: 800 mm, rotational speed (max.): 16,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 18 W, tool length: 305 mm, tool diameter: 77 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used AGIE CHARMILLES MIKRON VCE 800X PRO vertical machining center, year of manufacture 2012. Year of manufacture: 2012 Control: iTNC530 Supply voltage: 3x400 VAC + PE Frequency: 50/60 Hz Protection current: 32 A Control voltage: 24 V DC Connected load: 16 kW Noise level: 76 dB(A) Weight: 5000 kg Power factor cos φ: 0.9 Serial number: 1033618 Revision: V6.2 Documentation valid as of: 17.03.2010 Prepared for 4th-axis as well as additional Lehmann 4th axis Complete, fully enclosed machine cabin • Two side windows, large front doors • Efficient work area lighting • Telescopic covers for X, Y, and Z axes • Spiral chip conveyor with mechanical double filter • Automatic central lubrication • Side-mounted tool changer Prjdpsx Nikwjfx Ah Uef • Manual washdown gun • Manual compressed air gun • Machine status signal lamp • 10,000 rpm spindle (Pro-X 16,000 rpm) • Water-cooled spindle head • Active spindle chiller (14,000 / 16,000 rpm) • Side chip flushing system (Mikron VCE 600Pro – MIKRON VCE 1400Pro) • Coolant and air nozzles on the spindle head • Extendable coolant tank • Threading without compensating holders • Heidenhain iTNC530 control • Portable electronic handwheel • Heidenhain smart.NC • Tool management for up to 30,000 tools • Ethernet network connection and RS-232 interface • Prepared for additional options If you have any questions or need further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2015, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: fanuc, controller model: 31i model B5, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, spindle nose: BT 30 big plus, number of slots in tool magazine: 21, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: spindle cone with BIG PLUS attachment FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) hydraulic power unit for workpiece clamping high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet Pjdpouby Sxefx Ah Usrf robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Condition: used, Year of construction: 2011, machine/vehicle number: 149002, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, controller manufacturer: OSP, controller model: P200, table width: 500 mm, table length: 500 mm, The Okuma MB 5000H 4-axis machine was produced in 2011. It features a robust horizontal machining center design with a 500 x 500 mm pallet, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min-¹ with an SK40 taper for increased versatility. Additional features include a chip conveyor, a shower system, and provision for a Renishaw probe. If you're looking for high-quality milling capabilities, consider the Okuma MB 5000H machine we have for sale. Pedpfex I Nwnox Ah Usrf

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC i Series, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Pedpsx Nbtdsfx Ah Ujrf

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. In our opinion, the machine is in good used condition Predpfoxgicljx Ah Uof and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Tool magazine for 20 tools, BT 30 Podpev Iypcjfx Ah Uorf 4th axis HRT 210 with counter bearing Spiral conveyor Schusta automation with YASKAWA robot

Condition: excellent (used), Year of construction: 1999, X-axis 762 mm Y-axis 460 mm Z-axis 450 mm Working area 1,000 x 460 mm Spindle speed 7,000 rpm Pjdpfx Ahjx Ek Ngo Uorf Tool holder SK40 Drive power 7 kW Weight 5,500 kg Incl. 2-position pallet changer Incl. internal coolant supply (IKZ) Incl. complete documentation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 8,406 h, Control Unit Brand FANUC Movement X-Axis Movement 700 mm Z-Axis Movement 330 mm Y-Axis Movement 400 mm Psdpfxjx H A N Ij Ah Usrf Main Drive Number of axis 5 Spindle Speed 10000 RPM This 5-axis FANUC Robodrill α-D21LiA5 was manufactured in 2014. It features a spindle speed of 10,000 rpm, a 21-tool magazine, and a coolant tank capacity of 100 liters. The table measures 850 mm by 410 mm, supporting a maximum workpiece weight of 300 kg. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,118 h, spindle motor power: 22 W, spindle nose: BT40, number of slots in tool magazine: 40, Through-spindle coolant 20 bar Filtration Belt chip conveyor Workpiece probe Pjdpfox I Nutsx Ah Usrf Tool probe Robot interface preparation Automatic (side) door Portable handwheel Washing gun High-speed machining

Condition: excellent (used), Year of construction: 2003, Ultimax 4 control unit Pjdpfx Ahot Rubbe Uerf Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 tools, SK 40

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HEIDENHAIN Pedpfsx H A Nhex Ah Ujrf Model iTNC 530 HSCI Main Drive Number of axis 3 Movement X-Axis Movement 755 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 3-axis KOVOSVIT MAS MCV 754 QUICK was manufactured in 2015. It features a Heidenhain iTNC 530 HSCI control system, ISO 40 tool interface, and travels of 755 mm in X, 500 mm in Y, and 500 mm in Z. The machine includes a Renishaw probing system, Kitagawa Vice VE125LN, and a full set of tool holders and collets. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 754 QUICK machine we have for tact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Pjdpfev Rr Hxex Ah Usrf Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Chip conveyor Automation / Robot

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 5000 kg Measurements height 2747 mm Prodpfx Ahex D Dk So Ujf Measurements depth 2439 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM Spindle motor power 13.5 kW Tool taper SK 40 Control Unit Brand HURCO Model WINMAX 5 GEN Movement X-Axis Movement 760 mm Z-Axis Movement 610 mm Y-Axis Movement 510 mm Dimensions Machine Length 2180 mm Table Table Width 1020 mm Table Length 510 mm Table load 1350 kg This 3-axis Hurco VMX 30i was manufactured in 2018 and features a robust vertical machining center design. It boasts a spindle speed of 12000 rpm, a spindle motor power of 13.5 kW, and a tool changer with 30 pcs capacity. The machine dimensions include X=760 mm, Y=510 mm, and Z=610 mm, with a table size of 1020x510 mm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2008, Control Heidenhain iTNC 530 Travel X/Y/Z 750/600/560 mm Speed 18000 1/min Tool magazine for 30 tools HSK 63 IKZ 80 bar Clamping area 950 x 650 mm Air-conditioned interior Measuring probe Pjdsvcyixopfx Ah Ujrf suction unit Chip conveyor Numerous tool holders

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 4460 mm Measurements depth 2250 mm Measurements height 3550 mm Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Movement X-Axis Movement 750 mm Pjdpfx Ahox D Ivrj Uorf X-Axis Rapid Traverse 25 m/min Y-Axis Movement 500 mm Y-Axis Rapid Traverse 25 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 20 m/min Additional Equipment Incl. swivel/rotary table SRTA 2-300 for 5-axis machining This 5-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swivel/rotary table SRTA 2-300 for 5-axis machining. Consider the opportunity to buy this AXA DBZ vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2019, Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12.000 1/min IKZ 30 bar Belt filter system Measuring probe Tool magazine for 30 tools SK 40 Pjdpfxeunnafe Ah Ujrf Chip conveyor

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 2220 mm Measurements depth 3700 mm Measurements height 2735 mm Machine weight 5350 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Tool taper ISO 40 Number of axis 3 Movement X-Axis Movement 750 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Table Table load 650 kg Prsdpfxox D Rmys Ah Uef This 3-axis KOVOSVIT MAS MCV 750 Speed was manufactured in 2009. It features a table clamping surface of 1000 x 640 mm, a maximum table load of 650 kg, and a spindle speed up to 12000/min. The machine includes a 24-position tool magazine and has dimensions of 3700×2220×2735 mm. If you are looking to get high-quality milling capabilities, consider the KOVOSVIT MAS MCV 750 Speed machine we have for sale. Contact us for more information. Application Types Milling