Used machining centers (vertical) X-axis travel 800-999mm for sale (177)

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Bwjdpfxjzw Tw Uj Aiyow Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table load: 300 kg, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 5, This 5-axis HERMLE C 800 U was manufactured in 1997. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a NC swivelling rotary table measuring 540 x 540 mm and has a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 800 U vertical machining centre we have for sale. Contact us for further details. - Machine has Damage on an axis- Clamping Surface / Table: NC swivelling rotary table 540 x 540 mm (interference contour diameter: 630 mm)- Swivel Range: +20° towards machine / -90° away from machine- Rapid Traverse (X / Y / Z): 35 m/min- Feed Range (X / Y / Z): 1 - 2000 mm/min manual / 30,000 mm/min programmed- Feed Force (X, Y, Z at 80% ED): 8,000 N- Tool Taper: SK 40 (similar to DIN 2079) / HSK compatible- Tool Magazine Capacity: 30 tool pockets (Pick-Up changer / ring magazine)- Operating Voltage: 460 V / 3~ / 60 Hz- Control Voltage: 24 V DC / 220 V AC- Total Nominal Current: 63 A- Total Power Rating: 43 kVA (equipped with IKZ / options)- Machine Dimensions (L x W x H): 2.70 x 2.21 x 2.93 m (base standard) / Height max. 3.00 m- Footprint Required (L x W): 4.50 x 3.50 m- Coolant Tank Capacity: 300 Liters- Sound Emission: 78 dB (A)- Equipped Options: Oil mist extraction unit, Chip conveyor, Internal coolant supply (IKZ) preparation/unit Bedpfx As Ahybfjiyoww Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Bsdpfx Ajx N E Acsiysww Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation.

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Bwodpou Ehi Aofx Aiysw Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flushing through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P WT. Bwjdpfx Aiszw Rl Aoyow Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 1998, We are offering this used Hermle U 630 S vertical machining center, manufactured in 1998, for sale. Unfortunately, due to space constraints, we need to have the machine removed in week 44. The machine can be loaded for transport this week. If you have any questions or require further information, please feel free to send us a message or call us. Bwedpoz Tkc Eefx Aiyew

Condition: excellent (used), Dugard Eagle 850VMC (ML946E06), Fanuc Oi, 4th Axis & Tailstock, Toolchanger, Year 2011 X / Y / Z travel: 850×520×510mm Table size: 1,000×510mm Max table load: 500kg Spindle taper: BT40 Spindle speed: 80–8,000rpm; Bsdpfx Aowx Hlwsiyeww Spindle power: 11kW continuous, 15kW peak Rapid traverse: X30m/min, Y30m/min, Z24m/min; cutting feedrates up to 10000mm/min Machine footprint/weight: approx. 2.30×2.12×2.58m; 5.5tonnes

Condition: excellent (used), Year of construction: 2013, operating hours: 9,300 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 520 mm, controller manufacturer: fanuc, table width: 400 mm, table height: 400 mm, table length: 1,000 mm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine is powered on and can be demonstrated. The measuring probe and tool measurement system are included. Bwodpsz Iifmsfx Aiysw

Condition: good (used), Year of construction: 2007, operating hours: 106,880 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 29,070 h, number of slots in tool magazine: 200, Equipment: chip conveyor, Heidenhain iTNC 530 control system, HSK-A63 spindle taper, Pallet changer, Chip conveyor. Bedpfxs Afyzlo Aiysww

Condition: excellent (used), Year of construction: 2017, POSmill C 800 Compact – CNC machining center – Year of manufacture 2017 – Heidenhain TNC 620 Technical data: - Manufacturer: POSmill - Model: C 800 Compact Bwjdpfx Aoz Ny H Eeiyew - Year of manufacture: 2017 - Control system: Heidenhain TNC 620 - Travel in X: 800 mm - Travel in Y: 520 mm - Travel in Z: 550 mm - Table size: 950 × 520 mm - Spindle speed: max. 10,000 rpm - Tool holder: SK 40 - Tool changer: 24-position (subject to confirmation) - Machine weight: approx. 6,800 kg - Rated power: 25 kVA Operating hours: - Control system on: approx. 35,524 hours - Machine on: approx. 29,264 hours - Program run: approx. 14,359 hours - Spindle S1: approx. 11,651 hours Further information and viewings by appointment.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality. Bwjdpfx Aswww Rheiyjw

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 800 Duro Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Bwjdpfx Ao Afy Ilsiyew Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60

Condition: good (used), Year of construction: 2003, operating hours: 114,365 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,204 h, number of slots in tool magazine: 120, Equipment: chip conveyor, Travel distances X / Y / Z: 850 / 700 / 500 mm Control system: Heidenhain iTNC 530 Bwsdps Afy Evofx Aiysw 18,000 rpm, 15 kW, 130 Nm torque Tool magazine: 120 positions Maximum table load without pallet changer: 1,400 kg Tool holder: SK 40

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Bjdpfjy Ny A Djx Aiyeww Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,202 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details. • Spindle: • Max torque: 83 / 57 Nm Bwjdpjz Hb Taofx Aiysw • Working range: • Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min • Hours (approx.): • Operating: 12,138 h • Machining: 3,202 h

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 600 mm, table load: 1,200 kg, overall weight: 15,600 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 24, number of axes: 5, Vertical machining centre manufactured in 2005. This Fidia G996 RT features a robust CNC control system and a maximum spindle speed of 24,000 rpm. It includes a rotary-tilting table with a diameter of 800 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Fidia G996 RT machine we have for sale. Contact us for further details. • CNC control: FIDIA C20 XPowerMovement • Rapid traverse (X/Y/Z): 45 m/min • Positioning accuracy (X/Y/Z): ±0.003 mm (manufacturer’s spec) • Maximum acceleration: 10 m/s²Main electrospindle (reported configuration) • Max spindle torque (S6): 105 Nm • Tool holder: HSK-A63Rotary-tilting table (RT P-1000 – manufacturer’s specifications) • Table type: Rotary-tilting trunnion table • Table diameter: 800 mm • Maximum rotating diameter: 1,000 mm • A-axis travel: ±125° • A-axis speed: 75 rpm Bsdpo Agm Ryjfx Aiyoww • C-axis travel: Continuous rotation • C-axis speed: 100 rpmTool changer • Type: Automatic tool changer • Tool magazine capacity: 24 positions

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 950 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 95 Monoblock was manufactured in 2016. It features a tool capacity of 60 tools and is equipped with a Heidenhain TNC640 control unit. The machine includes an internal coolant supply of 40 bar and a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 Monoblock vertical machining centre we have for sale. Contact us for further details. - Internal Coolant Supply (IKZ): 40 bar- Tool Measurement: Blum laser tool measurement- Including: Quickset- Optional / Additional Equipment: FCS clamping system (with components), HSK63 shrink-fit chucks, additional spare drives, spindles, and gearboxes- Operational Status: Fully functional, currently still in full operation- Machine Condition: Good; air/sight glass on the front is defective; runs very smoothly and with high accuracy- Previous Application Profile: 85% Steel (80% 1.1730, 15% higher-alloy steels, 5% hardened steel up to 60 HRC), 14% Aluminium, 1% Ureol and plastics- On Hours 35.000- Spindle Hours (Spindle): 23,000 hours (spindle replaced/repaired after damage in June 2021) - Machining Tolerance: 0.01 mm (standard milling), 0.02 mm (tilted milling)- Operations Supported: Roughing and FinishingThe displayed image of the machine is AI generated. Bwjdjz S E Elepfx Aiyow Technical Specification Taper Size HSK 63

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Bwjdpfjznniajx Aiyjw Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 550 x 560mm, Table 1250 x 660mm, workpiece load 1,000kgs Spindle speed 8,000 rpm, Spindle taper BT40, Spindle Motor 11kw, Bedpfeu Hyuaex Aiyoww FANUC Oi-MC Control, 24 Station ATC, through spindle coolant.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, Brand: RMT Model: SIMPLE 8 Category: Vertical machining center Year of manufacture: 2008 CNC control: FANUC Series 0i-MC Machine weight: 7,500 kg Machine dimensions Length: 4,000 mm Width: 3,700 mm Height: 3,200 mm Spindle Spindle mounting: ISO 40 Maximum speed: 8,000 rpm Motor power: 9 kW Working travels X-axis: 900 mm Y-axis: 650 mm Z-axis: 620 mm Spindle nose–table distance: 150–800 mm Work table Dimensions: 1,000 × 625 mm Maximum load capacity: 750 kg T-slot tolerance: H7 Rapid traverses X/Y axes: 28,000 mm/min Z-axis: 28,000 mm/min Tool changer Taper type: DIN 69871/A40 Magazine capacity: 24 tools Bwsdjz Szgxspfx Aiysw Maximum tool diameter: 118 mm Maximum tool length: 300 mm Maximum tool weight: 9 kg Equipment and accessories Chip conveyor Coolant collection tank with washing pump High-pressure pump for coolant through the spindle, with separate tank Spindle line cooler Various tool holders Manuals and electrical diagrams

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: Hermle U 630 S Control: Heidenhain TNC 410 Year: 1999 SPECIFICATIONS Spindle speeds: 20 - 7.000 rpm Spindle power: 7,5 kW milling head: 0 - 90° Travel X-Axis: 875 mm Bsdpfoz Dkrmjx Aiyeww Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 15 m/min. Feed: (X/Y/Z): 15 m/min. Equipment Tool: SK 40 quill range: 75 mm Table size: 900 x 528 mm Power consumption: 14 KW Machine weight: 4.500 kg Req. space (LxBxH): 2,3 x 2,0 x 2,1 m

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Bedpfx Aez S Uddeiyjww Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: good (used), Year of construction: 2004, operating hours: 35,251 h, functionality: fully functional, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 11,082 h, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, This HERMLE U1130 universal machining center was manufactured in Germany in 2004 and has been in operation for 35,577 hours, of which only 8,087 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions. Additional information: Machine advantages: Qualitative machine advantages: Very good condition Bwedoz Inknepfx Aiyow Spindle operating hours: 11,082 Technical machine advantages: Internal cooling at 40 bar Integrated NC rotary table Blum laser measurement system Without the vises shown in the pictures.

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Bwedpfj Adl Rkox Aiyjw Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: good (used), Year of construction: 1999, CNC Vertical Machining Center MORI SEIKI SV – 400 Control system: FANUC MSC-501 Travel range X-axis: 600 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mounting: BT40 Spindle speed: 12,000 rpm Drive power: 22/18.5 kW Tool magazine: 40 Table size: 900 x 500 mm Bwedpfx Ajz D T I Rjiysw Accessories: Preparation for internal coolant supply, high-pressure pump 20 bar, 2 x articulated band chip conveyor, 30-position tool magazine, 4-axis interface with rotary table Nikken CNC-200