Used circular saws for sale (119)

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Blsdperi Skwsfx Adhep Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Blsdpfez A Al Njx Adhsp Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Max. blade diameter: 400 mm Used machine, still in good working condition.

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Cutting width (max.): 600 mm Cutting height (max.): 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Bedpfxszmf Idj Adholp Weight: 1500 kg Year of manufacture: 2001

Condition: used, Stock of 4 circular saws for construction sites Bsdpfxe Ahgp Ho Adhelp

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Bodpfx Adswx R Ivjhslp

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet Bjdpfx Adjcbq Nwjhelp 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Bljdpfxjr Elmwe Adhep Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Crosscut Saw APS KS-160 Cutting width 450 mm, Max cutting height 160 mm with material width around 180 mm, Blade diameter 550 mm, Motor approx. 5.5 kW, 380 V, Material clamp, Pneumatic blade extension, Outfeed rollers 200 x 52 cm, Machine dimensions 100 x 100 cm, The saw is operational and ready for use. Bsdpfsxd T Uyjx Adhelp

Condition: used, Year of construction: 1985, Tiltable blade Blsdpfx Aezlcy Iedhsp Manual ascent descent Sold as is, with no cleaning or overhaul

Condition: good (used), Year of construction: 1998, Robland E45 Saw blade diameter: 450 mm Cutting height: 150 mm Motor: 7.5 kW Bljdpfx Aozznxzodhsp Saw blade can be tilted up to 45 degrees Saw blade width to the right of the saw: 1,220 mm Cutting length of the sliding table: 1,270 mm

Condition: used, Longitudinal circular saw Bsdpfx Adjq E Ivtjhelp Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: used, Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Bsdpfx Adozryvmsholp

Condition: ready for operation (used), functionality: fully functional, 4-disc end-trimmer Trimming conveyor belt Bjdpfxszkugqs Adholp Operational

Condition: used, functionality: fully functional, DEBIMATIC crosscut saw Bljdpez I It Aefx Adhep Machine description coming soon.

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Blsdpeu Nifyofx Adhjp Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Bledoxq N T Eepfx Adhjp Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: excellent (used), functionality: fully functional, LOESER AA 200 – Cross-cutting and chamfering machine for dowels Diameter range: 6–18 mm Ø Minimum dowel/rod length: 15 mm Output: approx. 2000 dowels/hour Bljdpfx Ajz R Tm Njdhjp Motor power: 0.55 kW Cutting tool/blade speed: 7150 rpm

Condition: used, Year of construction: 2024, Squaring machine with tilting blade Motorized blade lifting Manual blade inclination Technical data : Bjdpfxjtl D Ene Adhslp anodized aluminum carriage mm. 3200/3800 main blade motor kW 5.5 scoring blade motor kW 1.1 max. blade diameter 350 mm blade tiltable at 45° max. cutting height with 90° blade 100 mm max. cutting height with blade at 45° 70 mm aluminum telescopic rod suspended "bridge" protection on the blade cutting width on the parallel guide mm.1500 dimensions of the fixed surface mm.1200x750

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Bsdpfszuy Axjx Adhslp Length of the log being processed: 2.0 - 6.5 m Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry - Remote control with CNC system - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Multi-blade circular saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate 2–48 m/min Bjdpfx Ajzh U A Hedhslp • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 scoring blades

Condition: new, Cutting height 175 - 210 mm Motor output 15 kW cutting width 620 mm Blodpfx Asz St Saedhop Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Blodpsxcwwpefx Adhep Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: new, Cutting height 175 mm Bedpfx Ajz St R Asdhelp Motor output 15 kW cutting width 620 mm Cutting length 5200 mm Dimensions (L/W/H) 7000 x 1470 x 850 mm

Condition: excellent (used), functionality: fully functional, MZ Project CS 1000 Optic crosscut saw Cutting width: 1000 mm Cutting height: 100 mm Saw blade diameter: 550 mm Electronic lifting and lowering of the clamping beam Automatic material feed Side discharge of cut material Infeed table length: 320 cm Outfeed table length: 255 cm Roller width in tables: 650 mm Bodpfxszcw Ics Adholp Year of manufacture: 1999 Operating pressure: 6 bar CE marking Machine dimensions: 650 x 190 x 190 cm (H)

Condition: used, functionality: fully functional, Crosscut saw with marking recognition. With this saw, cross-sections of 300 x 60 mm can be cut. It was previously used in front of a compact finger-jointing machine to cut out defects according to markings. These feed units are very good and ensure safe transport, as the lower rollers are pneumatically connected (coupled) with the upper ones. Bljdpfx Adjwxm Eqjhep