Used Debarkers for sale (58)

Condition: used, Year of construction: 1996, Diameter: 8-55 cm Djlrcjwhiqhob Nmecg Feed rate: up to 90 m/min.

Condition: used, Year of construction: 2013, EngineCAT C18; 600 hp / CAT C18; 447kW Machine Length44' 11" / 13.69m Weight98,000lbs / 44,452kg Dolrcb Nowhw Smsmscg Fuel Capacity330 gallons / 1,249 liters Drum Configuration Flail Drum - Width: 60" Diameter: 40" / Flail Drum: Width: 1.5m Diameter: 1.01m

Condition: used, Used log yard, complete with debarking and reduction system - Cross-feed, singulation Electrical system and motors replaced in 2016 - Log infeed, 40 m long Frequency-controlled motors for smooth start and stop Chain approximately 3 years old - Root reduction and debarking system, manufacturer HAEWA Mill, 1000 mm long Root reducer with automatic operation Debarking with manual control - Log diameter and length measurement - Vibrating chute and conveyor belts for waste disposal Djlrcbewfnv Dj Nmscg !! Sold on behalf of a customer!!

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs Djlrcbou Rpibe Nmjcg - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: excellent (used), Year of construction: 1999, 1. Baljer Zembrod Milling Head Debarker -Built in 1999 -Heavy-duty 4-strand log feeder cross conveyor -Debarking carriage Dslrcb Nev R Ea Ssmecg -Milling head -Planing head for cleaning -Root reducer -Operator cabin -Rails -Ejection boxes

Condition: reconditioned (used), Round wood debarker CAMBIO 45. Equipped with a AIR TEN rotor. Knife system CAM TOOL. Dslreiqkldocb Nmecg The debarker will be sold after an overhaul. Can be sold as part of a debarking line.

Condition: good (used), Year of construction: 1990, I will sell a VK 16 debarker, good condition, the line includes: 1. VK16 debarker. 2. Side feeder. 3. Longitudinal feeder. 4. Rear receiver with discharge. 5. Wood box, working diameter 6-36cm Dcolrcewgh Hxob Nmog

Condition: reconditioned (used), Totally renovated Cambio 75 debarker with 5 knives airten rotor and brand new hydraulic dampers Djlrcsncfrzob Nmecg

Condition: ready for operation (used), - Rotor motor 15 KW - 8 pc. knife mounted on the rotor - min. log length 2.1 meter - working diameter 60 - 360 mm Dslrjv E Hkzscb Nmocg - feed speed 28 meter/ min. - including chain infeed table with sep. motor

Condition: used, Year of construction: 1970, Functionality: fully functional, Fully functional debarking system Max 62cm Min 15 cm With tilting table Solidly built feeder table Very well maintained Dcelsv Dh U Ssrcb Nmeg This system is still in operation and can be inspected at any time. The reason for selling the system is a new purchase

Year of construction: 2020, Condition: new, Häwa root reducer NEW Type H 276 / 800 Stem 0.2m - 1m (root run 1.2m) Dolrcb Nsfccp Hsmjcg Trunk length min 2,4m - 5m ( also longer possible ) Total weight 5t Total connection 45kW with radio remote control

Condition: used, Year of construction: 2022, Functionality: fully functional, feed rate Y-axis: 700 m/min, Log peeler CAMBIO 45 AIR TEN. The peeler is sold after a major overhaul. Dolrcstcu Uasb Nmscg 4. Bark conveyor. 5. Centering conveyor. 6. Log peeler CAMBIO 75, knife system CAM TOOL. 7. Additional rollers after the peeler.

Condition: used, Year of construction: 1987, machine/vehicle number: 1088, Hello, I have a Valon Kone VK26MX debarker from 1987 for sale. The advert includes what is in the pictures, i.e. the debarker, the centering feeder and the wheels that receive the goods. Of course, the set includes a 45 kW engine driving the debarker, which is dismantled in the pictures. Please contact me by phone. The price given is for export Djlrcov Dulkeb Nmscg

Condition: reconditioned (used), Functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Dcslrjwfp Saecb Nmjg

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min Dslrcbsfn Iu Is Nmscg - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: used, Year of construction: 1992, Functionality: unexamined, For sale a round log sorting line by Holtec. Equipped with a feeder for logs up to 16 meters long, a Cambio 66 debarker, a system for cutting logs into short logs, a Bruks feed reducer and 20 boxes for logs from 2.5 to 8 meters long. The line was dismantled about two months ago and transported to our site. Possibility of assembling and starting the line at the customer's - all elements are numbered. Very attractive price! Interested parties are invited to contact me Delrov Iv T Dscb Nmecg

Condition: refurbished (used), HÄWA debarker -reconditioned-- -type H249 / 800 -Carriage made of a heavy welded steel construction -5 pairs of main drive wheels -Hydraulics for ejector -milling arm made of heavy steel construction, pneumatic -pneumatic milling head, working width 300mm, beater bars, beater blades and overrun ring -Milling head carbide tipped Dcolrcervim Hjb Nmog -Type H 249 / 800 -main drive wheels 800mm -log diameter 0.2m - 1.0m -log length 2.0m - 6.0m ( also longer ) -total connected load 32kW -With control panel

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Min tree length 3 m. Complete with original VK centring conveyor. To be sold after overhaul. Dcslrcsulv Hzob Nmjg

Condition: reconditioned (used), Functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Dolrswfdi Hocb Nmocg

Year of construction: 2016, Condition: used, Haewa / SMS Fraeskopf debarker Trolley made of a heavy welded steel construction 4 pairs of main drive wheels 1 split, toothed pair of main drive wheels Log drive with 2 speeds Hydraulics for ejector Frame arm made of a heavy steel construction cutter head: working width 300mm, beater bars, beater knives and overrun ring Milling head carbide tipped Hydraulic lowering of the milling head carriage drive frequency controlled, v = 0 - 60 m/min Type H 249 / 800 Master drive wheels 800mm log diameter 0,2m - 1,0m Dcjlecrp Aksrcb Nmjg trunk length 2,0m - 6,0m ( also longer ) Total connected load 35kW With control panel

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN. Dolrehkh Hxocb Nmecg

Year of construction: 1994, Condition: good (used), Baljer Zembrod root reducer with radio remote control Delrcb Nsn Skz Tsmocg

Condition: used, Functionality: fully functional, Centre conveyor and additional rolls for the CAMBIO log peeler. Dcolevcl H Aorcb Nmeg

Year of construction: 2018, Condition: like new (used), HÄWA debarking - new Type H256 / 800 -made of a heavy-duty welded steel construction -4 pair master drive wheel -1 split, toothed few master drive wheel -Master drive frequency controlled -Milling arm made of a heavy-duty steel construction -Head: working width 300 mm, hammers, cutting blade and baking ring Dolrcbedwidws Nmocg -Carbide tipped milling head -hydraulic lowering the milling head -Milling head feed frequency controlled Master drive wheel 800 mm diameter 0, 2 m - 1, 0 m stem length 1, 0 m - 6, 0 m total connected load 35kW-HBC radio remote control -immediately available Model 2018

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. Dcjlrcb Njiqi S Nsmog 6. Pocket for debarked logs. All equipment is new