Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Csdpfxe Aba Rge Apmori Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers. Crsdpfx Asx Ezlfopmoi

Condition: used, Year of construction: 2007, Used Fan Year of Manufacture: 2007 Features and Technical Specifications Credpfxe Agcnge Apmji - With steel blades - Inlet and outlet diameter: 350 mm - Airflow: 2.41 m³/s - Total pressure rise: 3,602 Pa - Motor: 13.3 kW, 2,900 rpm - Weight: 241 kg

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Features and Technical Specifications: - Waste disposal system consisting of: 1 clean-air dust collector with JP 350-L briquetting press Credj Ad Rnzopfx Apmsi 1 clean-air dust collector with JZ 350-L rotary valve - Technical specifications for the clean-air dust collector with JP 350-L briquetting press: Suction connection 350 mm Nominal airflow 6,580 m³/h Max. airflow 8,000 m³/h Negative pressure at nominal airflow: 2,750 Pa Motor power: 11 kW Nominal speed: 3,000 rpm

Condition: excellent (used), Year of construction: 2015, Dust extractor for capturing, conveying, and sorting all types of wood dust and chips from their sources, as well as extracting and separating settled wood chips and dust.
1 x Modular vacuum filter 9/4-30, 3 units. Fans: 2 x US-FHN 15kW
Conveyor device: 1 x rotary airlock NZRS 2140x665 Total volumetric flow: 30,000 m3/h Cjdpfjy Edxuox Apmjri

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Csdpfez Ikxzsx Apmjri Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 1998, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,107 m³/h, intake manifold diameter: 300 mm, overall weight: 650 kg, year of last overhaul: 2024, We are offering this used Höcker Polytechnik EA 300-7A dust extraction unit, manufactured in 1998. Model: EA 300-7A Codpez Rixmsfx Apmori Suction diameter: 300 mm Nominal volume flow: 6107 m3/h Minimum volume flow: 5089 m3/h Motor power: 7.5/0.18 kW Rated speed: 3000/900 min-1 Power supply: DS (3-phase) Frequency: 50 Hz Rated operating voltage: 400 V Rated current: A Weight: 650 kg Order number: 139414 Year of manufacture: Nov/1998 Equipment number: 92100 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2022, Demonstration Unit Year of Manufacture: 2022 Condition: Like new, 0 operating hours Features and Technical Specifications: - Sound-insulated, “Silent and SaveEnergy” Credpfxozwqd Sj Apmsi - With automatic shut-off - 2 fans, speed controlled via inverter - Jet cleaning - Filter categories M and H3 - Filter area: 50 m² - Airflow: 6,927 m³/h - Negative pressure: 3,365 Pa - 4 collection bins - Motor: 2 x 5.5 kW - Total power consumption: 11 kW - PLC touchscreen control - Intake connection: 350 mm - Weight: 1,160 kg - Dimensions: 3,900 x 1,620 x 2,660 mm

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Crjdpfx Ae Ah E Rwjpmji Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1999, 36 filter bags Crjdpfez Spuwsx Apmji dust extraction duct height: 7.5 m external dimensions of the dust extraction duct: 270 x 150 cm turbine power: 11 kW fire extinguisher automatic hydraulic sawdust feeding system for the briquetting machine bag shaking mechanism briquetting machine motor power: 4 kW year: 1999

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Features: - Dust collector - Briquetting press Technical Specifications: Vacumobil JP 300: - Nominal airflow: 5,100 m³/h - Max. airflow: 6,000 m³/h - Pressure differential at nominal airflow: 2,700 Pa - Pressure differential at max. airflow: 2,200 Pa - Filter area: 28.0 m² - Suction inlet: 300 mm - Inlet height: 1,215 mm (centered) - Fan motor: 7.5 kW - Customer-supplied fuse: 32 A - Compressed air connection: 1" - Operating pressure: 4.5 bar - Compressed air consumption: approx. 120 NL per pressure pulse at a pulse duration of 150 ms - Sound pressure level: 75.0 dB - Weight: 900 kg CS3-12 briquetting press: Maximum throughput: 50 kg/h or 0.75 m³/h (depending on material) - Hydraulic pump motor: 3.0 kW - Agitator motor: 0.37 kW - Feeding screw motor: 0.75 kW - Customer-supplied fuse: 16 A - Briquette diameter: 65 mm - Weight: 780 kg - Feed hopper: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Footprint: 4,500 x 3,000 x 2,900 mm Credpfxj Ad Rnus Apmsi Available starting in June/July 2027

Condition: used, Year of construction: 1995, functionality: unexamined, suction capacity: 10,000 m³/h, actuation type: electric, We are selling a dust extraction system from Wipos that we no longer need. We used the system to blow the chips into a container. The container is not included in this auction. Inspection is possible. Csdpfozunziox Apmjri Price is ex works; the buyer must dismantle the system. On-site support is available. No warranty is provided for the system!

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Crjdpfoy Dc R Tjx Apmoi Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: Crodpfjzlbqrex Apmsi - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, type of input current: three-phase, volume flow: 6,920 m³/h, intake vacuum (max.): 2,630 mbar, suction capacity: 8,000 m³/h, intake manifold diameter: 350 mm, overall weight: 825 kg, Equipment: CE marking, documentation/manual, We are offering this very well-maintained FELDER RL 350 stationary extraction system, year of manufacture 2023, including all pipes and shut-off dampers. Serial number: 35.03.120.23 Rated voltage: 400.0 V Number of phases: 3 Rated current: 22.0 A Rated power: 11.0 kW Year of manufacture: 2023 Extraction port diameter: 350 mm Motor speed: 2,900 rpm Credpfx Apsytq Dxsmji Nominal volume flow (at 20 m/s): 6,920 m³/h Negative pressure at nominal volume flow: 2,630 Pa Weight: 825 kg Main fuse: 32 A Including silencer 5 electropneumatic slide valves and control system Extinguishing device included If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Csdpfxszi Rkco Apmeri Capacity: approx. 15,000 m³/h Mechanical cleaning of filter bags Return channel for cleaned air

Condition: excellent (used), Year of construction: 2011, Höcker Polytechnik MultiStar VT 6/3 – Baghouse Filter * Manufacturer: Höcker Polytechnik GmbH, Germany * Type: MultiStar VT 6/3 – 78/207171 * Year of manufacture: 08/2011 * Project No.: 424630 * Article No.: 118136 Crsdpfx Aps Aaw Rzomsi * Filter area: 78.6 m² * Dust class: M * Filter cleaning: Shaking cleaning * Drive power: 0.18 kW * Voltage: 230/400 V * Frequency: 50 Hz * Certification: BG-EXAM * Country of origin: Germany For sale: Industrial baghouse filter for dust collection with mechanical filter cleaning.

Condition: used, Year of construction: 2017, Dimensions (L/W/H) 2.645 x 900 x 2.130 mm Crodpfx Ajz I Uc Dopmsi Filter capacity 14,5 m² Number of dust containers 3 St. Weight ca. 500 kg 200 mm

Condition: used, total width: 1,120 mm, total length: 2,500 mm, total height: 1,820 mm, Year of manufacture: 2008 Colour: Grey Empty weight: 838 kg - Year: 2008 - CE marking present: Yes - Serial number: 630165 - Main motor power [kW]: 37 - Flow capacity [m³/h]: 25000 - Negative pressure [Pa]: 3152 - Connection diameter [mm]: 640 - Output diameter [mm]: 630 - Voltage [V]: 400 - Power [kW]: 37.0 - Transport dimensions: 2500mm x 1120mm x 1820mm (l x w x h) - Transport weight [kg]: 838kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cedpfo Ah Ef Esx Apmori Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, machine/vehicle number: 200617, functionality: fully functional, Dear customers, To ensure fast and reliable processing of your request, we kindly ask you to contact us preferably by email. This will allow us to assign your request directly to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Technical data can be found on the nameplate. Credpfx Apsy Hz Upomei Available: immediately, the customer will receive a larger unit. Serial number: 200617 Riedex DM-200/M-B Dust collector Left-hand version, motorized cleaning, with chip container.

Condition: good (used), Code: 0513 Brand: AL-KO - GERMANY Model: MOBIL JET 120 - CE Standard Wheeled dust collector for wood dust, for joinery workshops, carpentry workshops, sawmills and other applications – CE Standard Three-phase motor 2,2 Kw Suction inlet diameter 120 mm Air flow rate 1120 m³/h Manual filter cleaning Overall dimensions mm 1085 x 650 x 1974 h Cedpfxe Ahyw Eo Apmori Weight kg 100

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Features and Technical Specifications - Motor: 11 kW Crsdpfo Af I Ifsx Apmei - 2600 pa - Inlet openings: 350 mm

Condition: new, Year of construction: 2026, functionality: fully functional, filter area: 10,000 m², Project Cancellation – New Filter Filter 10,000 m³/h bag filterQ=10,000m³/h with regeneration fans for shaking the filter bags, with collecting bags under the filter Credo Ahyu Hepfx Apmoi

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD extraction unit, without control software. Dust extraction unit, chip extraction, self-cleaning filter, vacuum-based ALKO ECO JET. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. It is ideally suited for all types of dry dust generated in various technological processes. Credpfeyrqnzsx Apmoi Filter bags can be replaced according to specific requirements and intended use.

Condition: used, total width: 1,250 mm, total length: 1,800 mm, total height: 1,500 mm, Year of manufacture: 1998 Colour: Grey Empty weight: 560 kg - Year: 1998 - Serial number: 450144 Csdo Ah Ebtepfx Apmsri - Main motor power [kW]: 30 - Flow capacity [m³/h]: 14630 - Negative pressure [Pa]: 4685 - Connection diameter [mm]: 470 - Output diameter [mm]: 440 - Transport dimensions: 1800mm x 1250mm x 1500mm (l x w x h) - Transport weight [kg]: 560kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels