Condition: used, Year of construction: 2000, Used Machine Year of Manufacture: 2000 Features and Technical Specifications: - Nominal Airflow: 5,040 m³/h - Minimum airflow: 3,532 m³/h - Inlet diameter: 250 mm - Filter area: 25.23 m² - Number of collection tanks: 3 - Negative pressure: 2,600 Pa - Collection tank capacity: 480 L - Motor: 5.5 kW - Automatic filter cleaning Dedpezuuncofx Aizjwd - Filter category: H2 - CE marking: Yes Dimensions: approx. 350 x 100 x 230 cm Weight: 740 kg Availability: available shortly Storage location: Röllbach

Condition: used, Year of construction: 2020, Extraction nozzle diameter: 160 mm Nominal volumetric flow: 1950 m³/h Volumetric flow monitoring: differential pressure indicator Vacuum: 3200 Pa Filter area: Filter cleaning: motorized Motor power: 2.2 kW Machine length: Dwsdpsz A Eacefx Aizod Machine width: Machine height: Weight: 320 kg

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells Dwedpfx Aijzlbqrjzjd - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Features and Technical Specifications - Motor: 11 kW - 2600 pa Dwjdpfe Af I Ifjx Aized - Inlet openings: 350 mm

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Djdpfx Aiez Ikxzjzowd Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 0.37 kW (0.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 400 kg, Aerotech OWW4A dust collector Year of production 2005. Dust collector in working order. Dwodpfx Aistxmqlszod

Condition: used, Year of construction: 2007, Used Fan Dwodpfx Ais Agcngezed Year of Manufacture: 2007 Features and Technical Specifications - With steel blades - Inlet and outlet diameter: 350 mm - Airflow: 2.41 m³/s - Total pressure rise: 3,602 Pa - Motor: 13.3 kW, 2,900 rpm - Weight: 241 kg

Condition: used, Year of construction: 2004, used fan year of manufacture: 2004 with electric motor, 1400 rpm, 11 kW design B 3 V-belt drive Dsdpfx Asz Svq Esizewd with motor tensioning rails steel impeller, forward-curved, mounted on double flange bearings housing in welded construction with suction and discharge nozzles suction diameter 250 mm availability: short notice location: Flörsheim

Condition: excellent (used), Year of construction: 2011, Höcker Polytechnik MultiStar VT 6/3 – Baghouse Filter * Manufacturer: Höcker Polytechnik GmbH, Germany * Type: MultiStar VT 6/3 – 78/207171 * Year of manufacture: 08/2011 Dedpfj Aaw Rzjx Aizewd * Project No.: 424630 * Article No.: 118136 * Filter area: 78.6 m² * Dust class: M * Filter cleaning: Shaking cleaning * Drive power: 0.18 kW * Voltage: 230/400 V * Frequency: 50 Hz * Certification: BG-EXAM * Country of origin: Germany For sale: Industrial baghouse filter for dust collection with mechanical filter cleaning.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 623 030, functionality: fully functional, volume flow: 10,000 m³/h, intake vacuum (max.): 350 mbar, suction capacity: 6,927 m³/h, intake manifold diameter: 350 mm, filter area: 50 m², noise level: 69 dB, actuation type: pneumatic, total length: 3,920 mm, total width: 1,610 mm, overall weight: 1,160 kg, SCHUKO Vacomat XP TWIN 350 Dwedpfxsz Rmkmj Aized

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Djdpfx Aiezxtz Nszewd Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: used, Year of construction: 1996, used good condition cleaned function tested Manufacturer: Höcker Polytechnik Type: Vacumobil EA 160 A Year of manufacture: 1996 Machine no.: 931014 GS dust tested CE type tested Clean air unit Underpressure Filter cleaning, automatic Filter cleaning, manual-motorized Connection diameter mm: 160 Motor kW: 3.0 Pressure Pa: 2580 Djdpfxjz D Iuxo Aizewd Air flow m³/h: 1447 Weight approx. kg: 250 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1994, used Dsdjz Np I Sjpfx Aizjwd in top condition cleaned functionality tested Manufacturer: Höcker Polytechnik Type: Year of manufacture: 6/94 Machine no.: 37273 Slow-speed operation, approx. 1400 rpm: 1460 Motor kW: 18.5 Connection diameter mm: 450 / 450x350 Pressure Pa: 2800 Air flow rate: 13200 m³/h Space requirement, approx. L x W x H mm: 2000x1200x1600 Weight, approx. kg: 150 Total connected load kW: 18.5 Location: 97447 Gerolzhofen, free loading, unpackaged Handover in the current condition as inspected without guarantee and warranty

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Dwsdo Ad Rnujpfx Aizjd Features: - Dust collector - Briquetting press Technical Specifications: Vacumobil JP 300: - Nominal airflow: 5,100 m³/h - Max. airflow: 6,000 m³/h - Pressure differential at nominal airflow: 2,700 Pa - Pressure differential at max. airflow: 2,200 Pa - Filter area: 28.0 m² - Suction inlet: 300 mm - Inlet height: 1,215 mm (centered) - Fan motor: 7.5 kW - Customer-supplied fuse: 32 A - Compressed air connection: 1" - Operating pressure: 4.5 bar - Compressed air consumption: approx. 120 NL per pressure pulse at a pulse duration of 150 ms - Sound pressure level: 75.0 dB - Weight: 900 kg CS3-12 briquetting press: Maximum throughput: 50 kg/h or 0.75 m³/h (depending on material) - Hydraulic pump motor: 3.0 kW - Agitator motor: 0.37 kW - Feeding screw motor: 0.75 kW - Customer-supplied fuse: 16 A - Briquette diameter: 65 mm - Weight: 780 kg - Feed hopper: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Footprint: 4,500 x 3,000 x 2,900 mm Available starting in June/July 2027

Condition: used, Year of construction: 1998, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,107 m³/h, intake manifold diameter: 300 mm, overall weight: 650 kg, year of last overhaul: 2024, We are offering this used Höcker Polytechnik EA 300-7A dust extraction unit, manufactured in 1998. Model: EA 300-7A Suction diameter: 300 mm Nominal volume flow: 6107 m3/h Minimum volume flow: 5089 m3/h Motor power: 7.5/0.18 kW Rated speed: 3000/900 min-1 Power supply: DS (3-phase) Frequency: 50 Hz Rated operating voltage: 400 V Rated current: A Weight: 650 kg Dwjdpfxoz Rixmj Aizod Order number: 139414 Year of manufacture: Nov/1998 Equipment number: 92100 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), disassembly included in the price air return duct fan motor power: 15 kW screw conveyor Dwodpfszvpxlex Aizjd total lock 72 filter bags mechanical filter cleaning transfer fan for sawdust

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: Dedpfe Ah E Rwox Aizowd The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Dwjdpfxsz Rrbde Aizod Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher PLC control Dwodpfx Ae Adrxboizjd Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Protection class: IP54 Negative pressure: approx. 1,020 Pa Dust class: M Mobile / can be moved on rollers Dodpfszzadcsx Aizewd The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Condition: used, functionality: fully functional, Dust extraction nozzle for a four-sided planer Number of connections: 9 Connection diameter: 140 mm Dwjdpfx Aie Agrzljzod Main duct diameter: 450 mm This nozzle is compatible with a Weinig Hydromat planer:

Year of construction: 1999, condition: good (used), Table dimensions 2000 x 1000 mm Dwodpe Aa A I Esfx Aizsd Motor output 0,75 kW Air consumption 4300 m³/h Year 1999

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 4x Ventilator 7,5 - 11,0 KW Total power apprx. 40.000 m3 / hr. Recuperation system for returning the hot air back Waste entry in container Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Possible to sell immediately only as a complete set. Dwodpfx Aoyzch Toized

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, Dsdjzzn Iispfx Aizswd pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: like new (used), Year of construction: 2026, Cyclone separator / extraction system in a robust, welded design optional: rotary valve fan Dwsdpfx Aoztzmveized piping steel frame please specify the required air flow rate in m³/h when requesting a quote.