Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Fgjb Hl Idjcdy I Ro Nsb Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) Fgsb Hljwhpcqe Id Njb - Residual dust content H3 /

Condition: good (used), Year of construction: 2012, Functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Fjb Hjwhlkwjl Id Nogb Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press with air recirculation

Condition: good (used), Year of construction: 2011, Functionality: fully functional, filter area: 13.5 m², negative pressure: 2,450 Pa, total height: 2,125 mm, total width: 870 mm, total length: 2,045 mm, overall weight: 340 kg, nominal flow rate: 1,832 m³/h, frequency: 50 Hz, power: 3 kW (4.08 HP), rotational speed (min.): 2,865 rpm, nominal voltage: 400 V, Schuko dust extractor/extractor Vacomat 180 X Pe Feb Hl Idjv Iam Is Negb good condition

Condition: excellent (used), Excellent condition Intermediate filter with rotary valve Ring line to the silo Fan 30 kw 10,050 m3/h Soundproof box 400 mm intake pipe Fgjb Hlswfgauj Id Nsb

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Feb Hjfzbqyol Id Nogb Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Fgsb Hjcnw T Ijl Id Nsb Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters. Fgeb Hlowhn T Ij Id Nob

Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Storage location: Nattheim Fgjb Hovwaukel Id Njb

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Fgsb Hewfgwgol Id Neb Intake socket: 250 mm Filter surface: 50 m² Number of collection boxes: 2 Underpressure: 3.875 Pa Length of filter hose: 2.000 mm Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, filter area: 73 m², type of input current: three-phase, volume flow: 5,298 m³/h, intake manifold diameter: 250 mm, nominal power: 5.5 kW (7.48 HP), Schuko Bagging System Year of manufacture: 1993 Number of fans: 1 Main motor: 5.5 kW, 12 A, 380 V Flow rate: 5298 m³/h Speed: 2880 rpm Filter area: 73 m² Filters: 40, 230 mm diameter, 2000 mm length Automatic shaking system - fire hose connection Including documentation and control system Fgjb Hljwhx Dko Id Nob Tap nozzle diameter: 250 mm Including piping

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa Fob Hlofydzbj Id Njgb • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit Fob Hljhk S Sto Id Nsgb For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2022, Fan new, year of construction 2022 Motor power 15 kW Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Connection 350 mm Feb Hletpdp Ue Id Njgb Weight 328 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Fgsb Hl Idehk S Swj Nsb Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, New machine Mobile dust extractor Dimensions and weights: Length (product) approx. 1000 mm Width/depth (product) approx. 500 mm Height (product) approx. 2100 mm Net weight approx. 39 kg Chip collection volume 110 l Nominal diameter of the suction nozzle inlet 203 mm Nominal diameter of the suction nozzle outlet 1 x 100, 1 x 120 mm Electrical data: Idle speed 2950 rpm Connection voltage 230 V Mains frequency 50 Hz Power input 1.5 kW Power output 1.05 kW Filter: Fgsb Hlowb Ehpe Id Njb Filter area 1.92 m² Noise emission: Sound pressure level max. 85.7 dB(A) Flow rate: Nominal flow rate 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Extractor, fine filter bag, chip bag Availability: Short-term Storage location: Hochheim

Year of construction: 1996, Condition: good (used), Make: NESTRO Lufttechnik GmbH Type: NE 160 Year of manufacture: 1996 Technical data (According to the manufacturer) Suction port Ø: 160 mm Filter area: 11,5 m² Nominal volume flow: 1,780 m³/h (after cleaning) Associated negative pressure before the fan: 3,000 Pa Minimum volume flow: 1,447 m³/h Associated negative pressure before the fan: 3,550 Pa Negative pressure at the interface: 3,100 Pa - (4.0 m hose length with Ø 160) Operating voltage: 400 V Motor power: 2,2 kW Rated speed: 2.800 rpm. Weight: approx. 240 kg Fgjb Hl Ideibwqze Nsb Footprint: L 860 x W 1,350 x H 1,960 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, Used dust extractor Year of manufacture: 2009 Condition: minor external damage, fully functional Nominal flow rate: 1120 m³/h Min. flow rate: 814 m³/h Fgob Hlsvu Idus Id Nsb Extraction nozzle: 120 mm 2050 Pa Filter area: 4.3 m² Motor: 2.2 kW, 400 V HxWxD: 1985 x 1085 x 650 mm Weight: approx. 99 kg Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, Description Fsb Hjfc A Urel Id Nsgb High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: new, Year of construction: 2021, - Dust extractor up to 160mm Fgjb Hljkwhyno Id Njb

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Fjb Hlebpg Nco Id Nsgb Top price for the exhibition piece

Condition: new, Year of construction: 2022, Suction unit already used for demonstration purposes Year of construction 2022 not dust-tested For milling, planing and sawdust High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For milling, planing and sawdust (not suitable for dust) Extraction unit can be rotated through 180° to allow extraction from below or above Sturdy metal fan wheel High-quality chassis as standard for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Double-woven fine filter bag Scope of delivery: Two filter bags, two chip bags Nominal volume flow2800 m³/h Negative pressure max.1900 Pa Fgob Hlokwhzhj Id Neb Filter area2 x 1.92 m² Chip collection volume2 x 120 l Nominal width external suction nozzle inlet203 mm Nominal width external extraction connection outlet1 x 100, 2 x 120 mm Idle speed2950 min¯¹ PU1 Dimensions and weights Length approx.1500 mm Width/depth approx.500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Input power2.2 kW Supply voltage400 V Mains frequency50 Hz Noise emission Sound pressure level max.87.5 dB(A) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Feb Hl Idjcdr E Ao Nsgb Subject to prior sale

Condition: new, Year of construction: 2022, Paint mist extraction Fjb Hl Ienvkggsd Nsgb New device Year of construction 2022 Ideal for woodworking companies, joineries/carpentry workshops and the trades in general Highly efficient air purification with high separation efficiency Mobile device for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Delivered ready to plug in Suction nozzle diameter 300 mm L x W x H approx. 1012 x 1135 x 1405 mm Connection 1.5 kW / 400 V Filter area 1 m² Noise emission max. sound pressure level 72 dB(A) Volume flow max. 500 Pa Weight 175 kg incl. starter set for FAG 1-4 Diameter 300 mm (3 m hose, 2 hose clamps, 1 collar with flange ring, 1 cover flap for outer wall) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Fgeb Hljhkztte Id Njb Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -