Year of construction: 2023, condition: new, Always in stock, as left and right version with motorized cleaning. Riedex DM-160 Motor power 3,0 kW Ready to plug in. Packed on pallet! Ready for shipment. Alternatively also available with JET cleaning. Many different designs possible ..... - with rotary valve (if desired with underframe) Dlsdsku Aifopfx Afloa - with briquetting press etc.

Condition: used, Year of construction: 1992, functionality: fully functional, ø 220 mm Airflow capacity 3950 m³/h Dlsdpfx Afjw E Inyoloa 4.0 kW, Dimensions 700 x 700 x 800 mm Weight 120 kg Available from the end of September!

Condition: excellent (used), Tecno Azzurra CS3A painting wall – after technical review – heater – year of manufacture 2007 Dledpfemmb Eujx Afloa – CE marking TECHNICAL PARAMETERS: width 3200mm height 2350mm depth 1500mm fan motor power 2.2 kW heater motor power 7.5 kW power supply 380V capacity 11000 m3/h

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 12345, 🌪️ Extraction System Höck PKFZ 1 with Radial Fan – Year of Manufacture: 2007 Technical Data: Manufacturer: Höcker Polytechnik GmbH Model: PKFZ 1-121/3018 Year: 2007 Filter Area: 183 m² Reference No.: 364577 Motor Power (Shaker): 0.18 kW Motor Power (Discharge): 0.71 kW Compressed Air Connection: Available Condition: Used, fully functional Location: 33154 Salzkotten 💨 Fan: Dsdpfx Aoxrdw Uofljla Manufacturer: [likely Höcker or external] Model: MXE D9-111230-00 Year: 2007 Serial Number: 227637 Volume Flow Rate: approx. 107–120 m³/min (≈ 6,400–7,200 m³/h) Total Pressure Increase: 315–390 daPa Shaft Power: approx. 10.7–11.0 kW Speed: approx. 2,820 rpm Inlet Temperature: 20°C 📦 Description: For sale is a complete extraction system from Höcker Polytechnik, consisting of filter unit and radial fan. The system was installed in 2007 and was used for extracting chips and dust in an industrial setting. It is robust, industrial-grade, and recognized for its durability. Ideally suitable for: • Woodworking • Plastics processing • General industrial extraction ⚙️ Condition: • Used, but in good technical condition • System was operational until recently • Visible signs of use (see photos) 📞 Contact: If interested or for further information, please contact us via message through Machineseeker or by phone. Viewing by appointment only. Price: €4,500 Location: 33154 Salzkotten Availability: Immediately

Condition: good (used), Year of construction: 1998, suction capacity: 4,900 m³/h, extraction connection diameter: 250 mm, inlet: 250 mm, Dust extractor, chip extraction unit, self-cleaning pneumatic negative pressure filter Alko Mobil JET 250 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust in various technological processes. Fan power: 6.5 kW Dledpfsqwyafox Aflsa Airflow: 4900 m3/h Vacuum: 2740 Pa Connection diameter: 250 mm Air return Stock no.: 1020

Condition: used, Used machine Technical data: Dlsdpfexmlw Ssx Aflea Airflow: 6,400 m³/h Total/static pressure: 2,300 Pa Speed: 2,890 rpm Motor power: 7.5 kW Medium density: 1.2 kg/m³ Availability: short-term Location: Röllbach

Year of construction: 2023, condition: new, Always in stock, as left and right version with motorized cleaning. Riedex DM-200 Motor power 4,0 kW Ready to plug in. Packed on pallet! Ready for shipment. Alternatively also available with JET cleaning. Dljdpfxeku Aibs Aflea Many different designs possible ..... - with rotary valve (if desired with underframe) - with briquetting press etc.

Year of construction: 2022, condition: new, functionality: fully functional, ATEX rotational valve, 1,5kw- 18rpm. Special heavy duty. SEW drive with cooler fan. Special knive system. Dedpex Dzc Eefx Afljla Special 5 line sleeve system. Inert gas adding hole. Possible to buy 2 new, and 5 slightly used valves.

Condition: new, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. Dsdpfx Aevugrdsfljla automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: excellent (used), System is like a new, very high quality. Including: 5 inch tube 31m, 4 inch tube 40m and 3 inch tube 41m Lot of standard radius elbows for these 3 diameters, standard 90 degree ty's, standard reducing couplings, compression couplings, threaded inlet valves etc. Dlodpfxox Anthe Aflea

Condition: excellent (used), Mobile Extractor Manufactured by Höcker Polytechnik Extractor Standard III A Intake diameter 160 mm Motor 2.2 kW 380 volts Air flow 2460 m3/h Year of manufacture 1992 Djdpswl U U Hsfx Aflela Transport dimensions: Height with filter 2450 mm without filter 1460 mm Length 1170 mm Width 570 mm Weight 80 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 55062012, filter area: 577 m², suction capacity: 80,000 m³/h, empty load weight: 9,900 kg, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Filtration area: 577 m² MACHINE DETAILS Unladen weight: 9,900 kg Dsdoxcnthspfx Afljla Transport packages: 1 EQUIPMENT Extraction system Fire extinguishing system Control cabinet included Shaker cleaning system CE marking present

Year of construction: 2017, condition: ready for operation (used), Technical data will follow! Dledpfx Afsgny Ryelja

Condition: used, Used machine Data to follow Dodpfexllw Nsx Aflsla

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Dsdpfxoudalwe Aflsla Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Year of construction: 2013, condition: ready for operation (used), See photos! Dlsdpfjgny Agex Afloa

Year of construction: 2021, condition: new, Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Riedex DM-350RV/P dust collector Technical data DM-350/P Engine power: 11,0 kW Nominal volume flow 20 m/s: 6927 m³/h max. air volume flow: 8000 m³/h Filter cleaning: JET cleaning Residual dust content: ᐸ0,1 mg/m³ Suction socket with shelf: 350 mm (right) with rotary valve, opening dimensions: 990x220 mm, motor: 0.37 kW Dledpfx Aofn Ndgjflja Exhaust air duct 90° with bird protection grille Optional: - Steel base frame 3400x2700x2000 mm (LxWxH)

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Dedpfjfv Hiqjx Aflola Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Djdpefr T Emsfx Aflola Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm Dlodsfr T Eqepfx Aflja depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve Dsdpeftb Ebefx Aflsla - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Year of construction: 2020, condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Dledofuhu Aepfx Afloa Hose connection rear bottom side: 250 mm Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Dlsdpfefn Ndcox Aflja Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Dljdpfxofn Ndds Afloa Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, POWER UNIT 300 P Dedpfx Afsulv A Asljla Available from around the beginning of 2025