Used eccentric presses single column 55-99t for sale (122)

Condition: good (used), 4 x eccentric press Ltjdpfxeq Rdr To Ah Uoa Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 The machines can be inspected on site.

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Ljdpfxjxtpltj Ah Ueta Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand Ljdpfx Asu Nfnkeh Uota - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms Ltsdpfxju E U Nio Ah Uea machine weight: 8160 kg

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm Lsdpfx Ahswc U Ine Usta with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2000, operating hours: 5,840 h, functionality: fully functional, machine/vehicle number: 510565, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Lodjxvqnbopfx Ah Ujta Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: excellent (used), functionality: fully functional, I am selling this line, which consists of the following press, decoiler, straightener, and Rebenda VP 205 CNC roller feeder. The line has been dismantled and stored in a warehouse. Excellent condition, regularly maintained. Ledpfx Ajxz Dnxeh Ujta

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches Ltsdpfx Ajw Ec A Eeh Uea - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: good (used), throat depth: 400 mm, ram adjustment: 80 mm, pressing force: 80 t, Capacity: 80 Ton Table surface: 750 x 550 mm Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg Ltodpougtkxefx Ah Uea

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm Ljdpfx Asb Tdqueh Ujta weight: 3,3 t

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm Lsdpfxovuuc Rs Ah Ueta table height over floor 800 mm ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual centralized lubrication, two-hand operation

Condition: used, Year of construction: 2000, operating hours: 6,750 h, functionality: fully functional, machine/vehicle number: 309661, Offered for sale is an eccentric press Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Ljdpfx Aoxvqmksh Uota Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – dismantling and transport by the buyer or by arrangement. If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Pressing force: 63t Press dimensions (L x W x H): 1800 x 1300 x 2500 mm Press weight: approx. 4,500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram dimensions (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Max. distance from ram to table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Ljdpew R Tl Tofx Ah Uota Operation modes: single (foot pedal, two-hand lever), continuous (automatic mode – programmable time interval 1–99,999 s and number of cycles 1–32,000) Special function for setting the lower position of the ram Automatic central lubrication Pneumatic clutch and brake. Note: Two identical presses are available (the only difference is in display size: 7" and 4.3"). If both presses are purchased, the total price is 12,000 EUR. Technical documentation is not available. Remote PLC programming assistance by a programmer is possible. Shipping costs are extra. Urgent sale, as more space is needed for new equipment.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23.05.5021, table width: 700 mm, table length: 500 mm, overall weight: 3,500 kg, pressing force: 61 t, stroke length: 100 mm, TECHNICAL DETAILS Nominal force: 600 kN Single stroke: 32 strokes/min at 1,400 rpm Continuous stroke: 65 strokes/min at 1,400 rpm Distance ram–table: min. 265 mm / max. 365 mm Stroke: 0 – 100 mm Die depth: 250 mm Ltsdpfx Ahjx Hyq Ao Uja Table dimensions: 500 x 700 mm Tool dimensions: max. 215 x 340 mm MACHINE DETAILS Air pressure: min. 4 bar / max. 6 bar Drive Motor power: 5 kW Motor speed: 1,400 rpm Flywheel speed: 1,400 rpm Electrical data Input voltage: 380 – 400 V, 50 – 60 Hz Total power: 5 kW at 380 V Machine weight: 3,500 kg

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Lsdpfx Aelb I Dzjh Uota Weight 4.5 tons good condition

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm Ltedpfx Ahjvuuave Uea table height over floor 750 - 980 mm ram surface 600 x 240 mm ram adjustment 100 mm power capacity 4,5 / 6,9 kW Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation press can be inspected in running condition in our warehouse

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm Ljdpek S Htxsfx Ah Uota ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm Ljdsvut Npspfx Ah Ueta table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Ltodpfx Ahjdzqlts Uea Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m Ljdpfx Aevut Hheh Ujta overhauled by the manufacturer in 2000 permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation press can be inspected in running condition in our warehouse

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Lsdpfxoi A A Tbj Ah Ueta Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm Ltodpjvut E Rsfx Ah Uea ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Ltedei Db Ibepfx Ah Uja Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Ljdpjvut Ewofx Ah Ueta Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation Lsdpfxjvuk Ene Ah Usta can be inspected in running condition in our warehouse