Used eccentric presses single column over 100t for sale (109)

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Dodpfxs Af Na Ae Apmokw Price: EUR 22,000 net

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 250 t, stroke length: 300 mm, table width: 900 mm, table length: 1,790 mm, table height: 180 mm, distance table to ram: 540 mm, total length: 2,180 mm, total width: 2,560 mm, total height: 4,350 mm, overall weight: 28,000 kg, Equipment: CE marking, documentation/manual, The machine is complete and in excellent condition (see photos and technical specifications attached). It is available for sale immediately and is stored and can be viewed at our workshops in Peschadoires, France. A technical file will be provided with the press. Price upon request. Djdpfx Aps Ahxgdjmjkw

Condition: excellent (used), machine/vehicle number: 4174847, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 250 mm, table width: 1,000 mm, table length: 1,650 mm, table height: 170 mm, distance table to ram: 510 mm, clearance between the columns: 1,370 mm, total height: 4,750 mm, overall weight: 42,000 kg, Equipment: documentation/manual, This press is in very good condition. It is a machine with a "D"-shaped frame, making it very versatile for various applications. Dksdpe Ahxlxofx Apmjw The machine is available for immediate sale and is currently stored in our workshops in Peschadoires, France. A technical file will be provided with the press. Attached you will find photos of the press and the technical data sheet. Price available upon request.

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm Dedpfxeykl Iae Apmekw

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Drive system: Conventional - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 Dedpjzrxr Tofx Apmskw - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1975, pressing force: 250 t, Pressure: 250 t Djdpj Ahxlqofx Apmjkw Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive Dsdpfxjz Alg Se Apmjkw - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 13.5 kW (18.35 HP), input current: 25 A, input frequency: 50 Hz, pressing force: 160 t, table width: 740 mm, table length: 1,300 mm, table height: 200 mm, ram plate width: 920 mm, ram plate length: 580 mm, distance table to ram: 600 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 3,500 mm, overall weight: 15,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, TEHSLA EPC160 – 160 TON MECHANICAL ECCENTRIC PRESS MAIN TECHNICAL DATA - Press Force: 160 tons - Stroke Rate: 24–52 strokes/min (adjustable) - Stroke Length: 16–160 mm (adjustable) - Ram Adjustment: 0–110 mm (motorized) - Maximum Opening Between Tables: 600 mm - Table Dimensions: 1,300 × 740 mm - Ram Dimensions: 920 × 580 mm - Main Motor Power: 15 kW - Control Panel: SIEMENS SIMATIC HMI MTP1200 Comfort PRO - Clutch System: Wet clutch - Safety Light Curtains: LEUZE - Ram Guidance: Eight-sided precision guiding system MACHINE TECHNICAL SPECIFICATIONS Machine Frame: Heavy-duty welded steel construction, engineered for high rigidity, structural stability and long-term durability under demanding industrial operating conditions. Control System: SIEMENS control system with SIMATIC HMI MTP1200 Comfort PRO touchscreen interface. Clutch System: Wet clutch system designed for reliable operation and long service life. Stroke Adjustment: Adjustable eccentric stroke from 16 to 160 mm. Stroke Speed Adjustment: Variable operating speed from 24 to 52 strokes per minute on plc. Ram Adjustment: Motorized ram adjustment, 0–110 mm. Guidance System: Precision eight-sided ram guiding system, providing excellent stability, accurate ram movement and reduced wear during continuous operation. Lubrication: Automatic circulating lubrication system. Overload Protection: Hydraulic overload protection system. Safety Light Curtains: LEUZE safety light curtains for operator protection. Safety Monitoring: Oil and air pressure monitoring with alarm functions. Operation Modes: Inch / Single Stroke / Continuous Stroke. Safety Operation: Two-hand control system. CE Compliance: Manufactured in accordance with applicable CE safety requirements. OPTIONAL EQUIPMENT & UPGRADES - Pneumatic holding systems - Mechanical or pneumatic ejector systems - Die cushions / pneumatic cushions - Customized ejector and cushion configurations - Additional protective safety guarding - Remote monitoring and control systems - Remote diagnostics, servicing and troubleshooting - Additional automation solutions according to customer requirements WARRANTY: 12 months CUSTOM PRESS MANUFACTURING TEHSLA is a Slovenian manufacturer of industrial hydraulic and mechanical eccentric presses. In addition to the advertised EPC160+ model, we manufacture customized eccentric presses with different pressing capacities, working table dimensions, stroke lengths and technical configurations. Our machines can be equipped with additional automation systems, ejectors, die cushions and other customer-specific solutions. MADE IN SLOVENIA Manufacturer: TEHSLA Model:EPC160+ Dedpfx Ajz R Sy Ijpmekw Country of Manufacture: Slovenia, European Union Machine Location:Ljubljana, Slovenia Inspection & Test Run:Available by prior arrangement. Contact us for further technical information, machine availability, customization options or a quotation. Other press capacities, dimensions and customized configurations are available directly from the manufacturer upon request.

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 250 t, table width: 1,120 mm, table length: 800 mm, total length: 25,800 mm, total width: 13,500 mm, total height: 29,750 mm, overall weight: 12,800 kg, height adjustment type: mechanical, stroke adjustment: 140 mm, Equipment: documentation/manual, Eccentric Press LE 250C. Year of manufacture: 1989 (ZTS - SLOVAKIA). New control cabinet according to the original schematic, central lubrication pump. Max. pressing force: 250 tons. Stroke: 30–140 mm. Max. number of strokes per minute: 45. Slide adjustment: 110 mm. Maximum slide-to-table distance: 450 mm. Slide clamping area: 800 x 475 mm. Table clamping area: 1120 x 800 mm. Motor power: 20 kW. Dimensions (Height x Width x Length): 2975 x 1350 x 2580 mm. Weight: 12,800 kg. Dkodpfetq Eqxox Apmew

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Dsdpfx Apjz Rk Shemskw Unwinding reel – up to 4000 kg - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: excellent (used), Year of construction: 1998, Rijva EP 180 Djdpfez Ngvyox Apmjkw Strokes per minute: 50 Motor: 8.8 kW Weight: approx. 12,000 kg

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Dkjdpfxjv T Dapj Apmow Stroke rate 50 /min.

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine Djdpeu Rwa Iefx Apmjkw - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1990, From the Gütersloh site we offer a well-maintained eccentric press Pressure 100 t Displacement 330 mm Hub 10-130 mm Speed 56 RPM Eccentric adjustment 80 mm Table surface 830x600 mm Piston face 250x130 mm Dkedpfx Aeyglzfjpmow Table height 870 mm Taper hole in the piston 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Condition: used, Year of construction: 1987, Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible. Dkjdpfx Aps Aalp Ejmjw

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Dkjdsw Rbxzspfx Apmjw Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: as good as new (ex-display), Year of construction: 2026, Machine to be exhibited at EUROBLECH 2026: Trade fair – special price! Press force: 1600 kN Stroke: 15 – 110 mm Stroke rate: 30 – 65 /min Ram adjustment: 95 mm Table: 1,100 x 700 mm Dkedpfx Apjz Hkh Hjmew Ram: 900 x 500 mm Installation height: 460 mm Weight: 12,000 kg Connection: 15 kW Includes: - Fully automatic stroke adjustment, hydraulic overload protection, motorized ram adjustment - Frequency inverter, central lubrication, light curtain - Control system: SIEMENS S7/1500

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Dkjdpfx Aezxmimjpmjw Motor power: 30 HP

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Djdpozmfnqefx Apmskw Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: used, pressing force: 150 t, Eccentric Press Brand: ULECIA Serial No.: 1877 Type: Pneumatic Clutch Force: 150 t Dsdpfxeylzcvs Apmokw Strokes per minute: 40 Stroke (Max / Min): 160 / 24 mm Power: 10 HP *The press is delivered as is, without any type of warranty.

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm Dodpfxozwg Ums Apmskw stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Dodpsdzqddjfx Apmskw Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm Dksdpjy Tvdxofx Apmsw - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Dedpju D Dhxofx Apmekw Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Dkedpfevbk Rwjx Apmow Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min