Used edgebanders for sale (578)

Condition: used, BRANDT ambition 1440 edger well-equipped, Pre-milling cutters Edge trimming unit glue application by roller pneumatic pre-trimmer pressure rollers trimming cutters up-and-down milling unit 2 x corner rounding units R1-R2, adjustable from the control panel profile edgebanding unit, pneumatically activated flat edgebanding unit, pneumatically activated polishing unit max. workpiece height 60mm max. veneer thickness in roll 3mm feed rate max. 14m/min Good condition Dodpj Ahm S Usfx Aizjwd

Condition: used, Biesse Akron 1300 Edgebanding Machine Pre-milling cutters Replaceable glue pot Roller glue application Pneumatic pre-trimming guillotine Pressure rollers Final trimming saw R1-R2 top-bottom milling unit Multi-profile trimming cycle Flat trimming cycle Polishing unit Max. component height: 60mm Dwodpfxj Af U E Tj Aizjd Max. edgeband thickness (roll): 3mm Feed rate: 12m/min Machine length: 410cm Connected power: 8.6KW Machine inspected, ready for operation.

Condition: excellent (used), BRANDT KDF 440 edger, Dwedpfo Af Uzaox Aized well-equipped, CNC-controlled units operated from the control panel Liquids Pre-routing cutters Plate heating Glue application by roller Exchangeable tank Pneumatic preliminary guillotine Pressure rollers Trimming knives for final trimming Multi-routing unit, top and bottom, R1-R2 Corner rounding unit, R1-R2, pneumatically switchable Multi-profile edger, R1-R2 Flat edger Liquids Polisher Max. part height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 8 m/min Very good condition for a used machine Original mileage 400,000 meters

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. Dedpez D U A Ajfx Aizowd For further information about the machine, please see the images or feel free to request it.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: 919/2-602, functionality: fully functional, operating hours: 7 h, Equipment: CE marking, documentation/manual, HOLZ-HER, STREAMER 1057 XL Classic, year of manufacture 2026, showroom machine for sale. Technical data Machine type: Edge banding machine Model: HOLZ-HER STREAMER 1057XL classic Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 6 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm Dwedpfx Aie Agnllszsd Workpiece width: min. 65 mm Workpiece length: min. 160 mm Feed rate: 10 m/min Voltage / Frequency: 400 V / 50 Hz Machine configuration & equipment Control system: Edge Control BC 15 with 15.6" touchscreen (color display 16:9, network-enabled, password-protected) Setup system: VISE (Visual Setting Mode) – digital logbook for setting values and digital counter Infeed area: Retractable workpiece support (distance 600 mm) Long infeed fence (1252 mm) BS501 guide system for right-angled feeding of narrow parts Jointing unit: FG201 with 2 milling heads (co-rotating/counter-rotating), incl. diamond-tipped milling cutters (Ø~70×48×30 mm) and Air Stream system Edge feeder: MG301 for roll and strip material with support plate (Ø~820 mm) Glue application system: Glu Jet GJ301 (hybrid technology for EVA and PUR adhesives in cartridges and as granules, fast heating within 3 minutes, automatic regulation of glue height and automatic refill function) Pressing unit: DW201 pneumatic (1 driven roller, 2 conical pressure rollers) Trimming unit: KA501 pneumatic (2×0.45 kW, pneumatically swiveling 0 - 10°) Multi-function milling unit: FR201 (2×0.6 kW) Profile milling unit: FF201 (1×0.35 kW) Finishing: Scraping unit ZK301 (with 2 supports and digital displays) Surface scraping blade FK702 Lighting: LED lights (3 pcs) for the infeed and processing area

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Dodpfjzpzy Uex Aizowd Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2012, HOMAG KAL 211 Ambition 2274, manufactured in 2012. Single-sided edge banding machine with joint milling units, A20 gluing unit, HL84 capping units, BF10 pre-milling units, FK11 profile milling units, PN10 profile trimming knife, glue joint trimming knife, and buffing unit. Feed rate: 20 m/min Overall length: 8,635 mm Control system: powerControl PC22 / woodCommander Workpiece thickness: 12–40 mm (standard configuration); expansion to 60 mm and limited 8-mm processing according to the original configuration. Counter readings: 60,422 operating hours, 12,789 feed hours, and 2,614 processing hours. Dodpfxe Ahzqle Aizswd Price upon request.

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left. Maximum edge band thickness: 3 mm. Minimum workpiece thickness: 8 mm. Maximum workpiece thickness: 60 mm. Minimum workpiece width: 80 mm. Minimum workpiece length: 190 mm. Feed rate: 10 m/min. Heat-up time: 5 min. Edge banding unit: Yes, with 2 milling units. Edge banding tool: Dia-changeable milling cutter. Diameter: 100 mm. Height: 44 mm. Adjustment of the infeed guide: manual. Trimming shear up to: 3 mm. Individual edge feeding: possible. Gluing: Glue contact roller. Miter saw: Yes. Combination unit for flush trimming/chamfering/rounding: pneumatically adjustable. Rounding unit: pneumatically adjustable. Profile drawing blade: pneumatically adjustable. Flat drawing blade: Yes, sensor-controlled. Unit display: on the display. Control type: PLC linear control. Operation: Touch screen. Motor power: 13.8 kW. Drive system: Yes. Extendable roller support: Yes. Protective cover: Yes. Weight approx.: 1550 kg. Extraction diameter: 80/140 mm. Dimensions: 5000 mm. Storage location: Dwedpfozl Am Iox Aizjd

Condition: good (used), Year of construction: 2002, overall weight: 600 kg, Equipment: CE marking, documentation/manual, For sale: a used Hebrock EURO 2000 edge banding machine. Equipment: +Cutting unit +Routing unit for radius and chamfer +Digitally controlled glue temperature Dwjdpfez Hy A Hjx Aizod +Automatic feed +Adjustable workpiece pressure +Extendable workpiece support +Control panel with separate selection of units +Operating manual and machine documentation available Technical data: +Year of manufacture: 2002 +Machine no.: 4868 +Connection power: 7.0 kW +Voltage: 230/400 V +Frequency: 50 Hz +Current draw: 13.6 A Inspection and test run possible by prior arrangement. Invoice with VAT shown. Subject to prior sale and errors.

Condition: used, Year of construction: 2011, Gluing, edge banding, capping, combination milling, corner copying, pull blade. Power consumption: 10 kW. Dust extraction: 1x 120 / 3x 60 / 1x 100 mm. Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dwsdozx Tlnepfx Aizod Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Storage location: Nattheim.

Condition: excellent (used), SCM K360 Edge Banding Machine Liquids Pre-milling cutters, Edge banding with roller, Replaceable adhesive tank Features adhesive discharge valve Pneumatic pre-cutting guillotine, Trimming saws R1-R2 top and bottom milling unit, pneumatically adjustable Dwodpfx Aisz Sl R Nezod Corner rounding unit, pneumatically adjustable Profile trimming unit, pneumatically engaged Cleaning fluids Straight trimming unit, Max. element height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Total run distance approximately 33,000m Very good condition Inspection and testing possible on-site

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, operating hours: 5 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, total height: 1,600 mm, total length: 5,700 mm, total width: 1,200 mm, overall weight: 3,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used OTT Tornado Plus, professionally refurbished and inspected. Very good condition with a traceable history. The machine is fully functional and connected. A test run can be arranged at any time by appointment. Equipment: Fine milling cutter, radius, cleaning set (4-way spray system incl. scrubbing brushes), angle insertion aid, Zk.c – profile drawing blade R1 (incl. pneumatic adjustment for workpiece feeler rollers for workpieces with and without protective film), Zk.c – profile drawing blade R2, Zk.f – surface drawing blade, flush cutter, corner rounding AKF, surface drawing blade, forming pressure zone, edge processing unit, edge magazine, radius drawing blade Touch screen: 18.5", clear operation with powerful Beckhoff control Dwsdpfjz Sq Edsx Aizjd Year of manufacture: 2011 Weight [kg]: 3000 Previous owner: 1 Availability: Short-term, by arrangement The Tornado+ is designed for high throughput: high feed rate with consistent edge quality, designed for multi-shift operation. It is therefore the machine for companies where the edge banding machine is the pacemaker of production, and downtime directly results in lost units. We will coordinate the equipment, units, and level of automation with you. Compact and versatile. The edge banding machine has been completely overhauled and revised by us. All tools, hoses, chain plates, etc. have been renewed. Fully functional machine.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. Dodjzizabepfx Aizowd - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: good (used), Year of construction: 1994, workpiece height (max.): 60 mm, feed rate X-axis: 11 m/min, total length: 4,800 mm, overall weight: 1,000 kg, Edge bander HolzHer, model 1437 SE, very well equipped; cartridge adhesive station, flush trimming with two milling units, radius R=3mm, two additional units available for exchange, profile trimming, chamfering. Dwodpfx Aozzz Aaeizod

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spray system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output: approx. 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; version up to 60 mm. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spray unit top / bottom. Joint milling unit. Gluing unit. 2-roll edge magazine. Pressing zone. Trimming unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Profile trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm, as well as for 1 mm edges. Storage location: Nattheim Dedpjz Hb Hmsfx Aizswd

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Dwjdpfx Aijzb Aicozod Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Dwsdowun Irspfx Aized Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 1998, For sale: a Polymac Rubber veneer machine, lightly used, in like-new condition. Dsdpfjz Sb T Tjx Aizjwd

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, year of manufacture 2003 - Only 160,000 linear meters run, very good condition - - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production, HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, 2nd set of cutters available, various indexable inserts available. Board thickness max. approx. 48 mm, edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for release and cleaning agents, controlled by demand. - Jointing fence motor-controlled and programmable. - Jointing cutters 1961, 2 x 2.0 kW - Glue system cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressure unit 1903 MOT, pressure of the 1st and other rollers can be adjusted separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823 - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel) - Profile trimming blade 2 mm 1929 pneumatically controlled. Dsdpjz Dxh Nefx Aizjwd - Corner copying unit 1983 carbide-tipped, with adjustment on the control panel, functional, but needs to be fine-tuned again. - Flat trimming blade 1964 - Oscillating unit controlled by demand. Includes all operating manuals, documentation of the process steps digitally and in printed form by Holzher technicians. One set of DIA jointing cutters is included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, year of manufacture 1995. Mounted on the machine with coupling to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate, sensors still available from HOMAG. - Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses, machine currently powered and in operation. Price negotiable. Machine available after clarification in December / January 2027. Crane loading or forklift loading also possible from an external warehouse.

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Dwodpfx Aeu Hldmsizjd Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), SCM K360 HP Edging Machine Liquids Pre-milling cutters, Plate heating Edge banding with roller, Replaceable tank Pneumatic pre-cutter, Trimming saws Up-and-down milling unit (multi milling cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Dedpfx Aioz Hl E Tszswd Flat edging, Liquids Polishing unit The machine has NC control. Max. element height: 60 mm Max. edge banding thickness (in roll): 3 mm Feed speed: 11 m/min Original mileage: just under 19,000 meters. In my opinion, the technical condition is very good. The machine can be inspected and tested on site.

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Dedpfx Aiozwd Ikjzswd Plate heating Pre-heating unit Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.

Condition: used, Edge sanding machines OTT S30 – 20 m/min Manufacturer: OTT Type: S30 Condition: Used Location: Rattelsdorf warehouse Dwsdpfoz S Nukox Aizjd Machine description For sale is a used OTT S30 edge banding machine for professional edge processing in the wood and furniture industry. The machine features various processing units for efficient edge processing and is suitable for use in furniture production as well as in wood processing companies. Equipment and functions * Edge banding * Trimming * Flush trimming * Radius milling (R = 2 mm) * Scraping blade * Quick heating tank * Glue tank for granules * Feed rate: approx. 20 m/min Technical data * Machine length: approx. 4,500 mm * Year of manufacture: unknown * Machine condition: used

Condition: used, Year of construction: 2007, Workpiece thickness: 8 – 50 mm Dwsdpfx Aio Agli Nozod Edge thickness: 0.4 – 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Nattheim

Condition: excellent (used), SCM Olimpic K100 edge banding machine pre-milling cutters, glue application using a roller, The glue pot has an exchange function. pneumatic pre-trimmer, pressure rollers, front and rear trimming cutters, R1 – R2 top and bottom milling unit, profile trimming, Dwsdpfx Aioz E U Hdezed flat trimming, machine length 320 cm, feed rate 7 m/min, max. workpiece height 50 mm, max. edge thickness 3 mm.