Used edgebanders for sale (560)

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Duodpfx Agoyxndbe Ror Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + Panel Return System TFU 140! TECHNICAL DETAILS Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edge material in rolls: 0.3-3 mm EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application unit 2-roller magazine feeder Dsdeyzxa Eepfx Ag Rjur Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Dusdpjyng Agofx Ag Rer Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis Dujdpsu R Sy Aefx Ag Rer - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks Dsdsypm Dgopfx Ag Reur 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Dujdpfx Agjypm Avj Rsr Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Duedoyyb Icepfx Ag Rer Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. Dusdewgb Hxspfx Ag Ror The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) Duedpsx D D R Ssfx Ag Rjr • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Edge Banding Machine Manufacturer: IMA Type: Quadromat 3512 U Year of 1999 Edge material: veneer rolls and strips, plastic, solid wood strips Edge height: 14-50 mm Edge thickness: 0.4-12 mm Speed: 18,000 rpm Cutting unit Milling units Dodev T R Erspfx Ag Rour Profile scrapers Buffing unit Flat scrapers

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Duedpfoyuylusx Ag Rsr Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough trimming unit Tools included Duedpfsyuyfzsx Ag Ror 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Dusdpsyux Rijfx Ag Ror Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Dedpfx Agjyux Ego Rour Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: good (used), Year of construction: 2005, functionality: fully functional, HolzHer 1310 with double-sided end trim saws, multifunction milling aggregates, profile scraper, flat scraper, Schwabelln (polishing brushes) Djdpfx Ajyzd Ibeg Rjur

Condition: excellent (used), Edgebanding Machine Advantage 4612F - Regularly maintained, year of manufacture 2002 - Total length 6000 mm - Width 1100 mm Dsdpfx Agjx Srp Ij Reur - Height 1900 mm - Weight 3100 kg - Feed rate: 12 m/min - Workpiece dimensions: width 65 mm, max. thickness 45 mm, min. thickness 10 mm, length 150 mm, edge height 55 mm, 7 bar pressure - With two interchangeable glue pots - Pre-milling, flush trimming saw, multifunction unit, profile & surface scraper, buffing - With pre-milling unit

Condition: good (used), Year of construction: 2004, Used Edgebanding Machine Model: Hebrock AKV 3005 DKF Year of Manufacture: 2004 Direct glue application onto the workpiece Includes jointing unit Edge material magazine divider High-frequency cross-cut saw Chip collection box (cross-cut saw) Pneumatic roller end trimming Control panel, PLC control system Transport chain with fixed, special chain plates Double roller top pressure (ball bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (cross-cut saw, corner rounding unit) Quick heating glue pot (maintenance-free, Teflon-coated) Maintenance- and operator-friendly design Corner rounding unit Profile scraping unit Surface scraper Djdpfjyyw Tzex Ag Reur Chip collection box (scraping unit) Max. edge thickness: 3 mm Min./max. workpiece thickness: 10 / 40* mm Min. workpiece length: approx. 200* mm Min. workpiece width: approx. 70* mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Max. total connected load: 12 kW Electrical connection: 400 V / 3 Ph / 50 Hz Dimensions (L x W): 5000 x 1445 mm Height: 1620 mm Weight: 1400 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Dodoyy S Adopfx Ag Reur Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, Dedeu R S Nwspfx Ag Rjur radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Duodpfx Ajyw N Apog Rsr Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) Dedpfeyw Nu Eex Ag Rour • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: Duedpsyxhqnefx Ag Rsr - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge band thickness in strips mm: 0.4 – 3 - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm Dedpfxo T T Dds Ag Rour electr. connection: 380 V, approx. 9,9 kW space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min Duedpeyfp N Dofx Ag Rjr - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Equipment: - disc - heating strip - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Dsdsyzy D Sopfx Ag Reur Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change)