Condition: excellent (used), Year of construction: 2014, Feed Speed: 8-18m/min Feed Speed with Corner Rounding: 14m/min WorkPiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material strips: 0.4-12mm Djljwgldusn Hca Ejcg Extension of Infeed fence 300mm PU Rollers Joint Trimming 2x2.2Kw Workpiece Pre-Heating Airtec Unit Quickmelt Application Unit End Trim Chamfer / Straight with pneumatic adjustment Multi Trimming MS 40 Unit (2 profiles) with multiple roller sensing Multifunctional Contour Trimming Profile Scraping MZ 40 (2 profiles) with multiple roller sensing Glue Joint Scraper Buffing Unit Separating agent Spray Device Lubricant Spray Unit Detergent Spraying Unit Automatic Edge Infeed Device Power Touch Control System Homag TFU140

Condition: used, Year of construction: 2023, OAV Max 330 Edgebander. S/No. 23040002EB3N3 (2023). Country of Origin: Taiwan Please Note: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described. Dceln Hcowhnkyea Ejg

Condition: used, machine/vehicle number: 007793, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Dcoln Hcajv Tfyde Eog

Condition: used, total length: 3,000 mm, total height: 1,400 mm, total width: 1,000 mm, Weight: 700 kg Delnewh Ai Re Hca Ejcg - Documentation available: No - Transport dimensions: 3000mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder Djlokwhapon Hca Eocg - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2018, Comeva Compacta E 4T Edgebander with Pre-milling Description: Max / min edge thickness: 0,4-3 mm Pre milling unit Gluing unit Cutting unit End cutting unit with saw Machine sizes: 3900x800x1500 Weight: 1500 Kg Deln Hswgb I Noca Eecg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2014, Feed Speed: 8-18m/min Feed Speed with Corner Rounding: 14m/min WorkPiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material strips: 0.4-12mm Extension of Infeed fence 300mm PU Rollers Joint Trimming 2x2.2Kw Workpiece Pre-Heating Airtec Unit Quickmelt Application Unit Dslnswgldno Hca Eecg End Trim Chamfer / Straight with pneumatic adjustment Multi Trimming MS 40 Unit (2 profiles) with multiple roller sensing Multifunctional Contour Trimming Profile Scraping MZ 40 (2 profiles) with multiple roller sensing Glue Joint Scraper Buffing Unit Separating agent Spray Device Lubricant Spray Unit Detergent Spraying Unit Automatic Edge Infeed Device Power Touch Control System Homag TFU140

Condition: excellent (used), HOLZ-HER Streamer 1057 edge banding machine - used - Control with LCD display, pivoting control panel, manual, self-clamping pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutters for up- and down-feed, strip magazine, standby function, GluJet cartridge system, cartridge system with tactile nozzle, use of PUR adhesives possible, Doljwakrwen Hca Eocg printing unit with driven roller, pneumatic control of the printing unit, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, diamond-coated trimming tools, corner rounding unit with diamond-coated cutter, radius scraper, chip catcher for radius scraper, surface scraper, Blow nozzle on the surface scraper ----- Technical specifications ----- Edge thickness for rolled material: 3 mm, Edge thickness for strip material: 5 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min., Distance to workpiece support: 600 mm, Support plate diameter for edge material: 800 mm, Cut-off knife for rolled material up to: 3 mm, Heat-up time: 3.5 min., Joining cutter power: 1.2/0.8 kW, Cut-off saw power: 2 x 0.45 kW, Milling station power: 2 x 0.6 kW, Corner rounding power: 0.3 kW, Extraction nozzle diameter of jointing milling unit: 2 x 80 mm, Extraction nozzle Miter saw diameter: 2 x 70 mm, Extraction nozzle diameter of milling unit: 100 mm, Extraction nozzle diameter of scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 4,630 mm, Dimensions (LxWxH): 4,630 x 1,200 x 1,630 mm, Weight: 1,200 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, machine/vehicle number: 006527, Type of edging: Solid wood Gluing System: PUR Premilling Unit: yes Dcjlnspig A Ie Hca Esg Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 62 mm

Condition: used, Year of construction: 2013, total length: 3,800 mm, total height: 1,500 mm, total width: 1,000 mm, Weight: 1.500 kg Price: On request - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: 230 - Voltage [V]: 400 Dceln Hcewh Ai Dea Eeg - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1000mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Dcolnewhb Tze Hca Ejg

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) Dcjlewgb Hxon Hca Eeg (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2001, For edgebanding of irregular shaped parts. Dceln Hcaswga Uhj Ejg

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 Djleu R Sy Aen Hca Ejcg This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Deln Hcasnzrt As Escg Max feed speed: 11 m/min Maximum panel thickness: 50 mm

Condition: used, Year of construction: 1991, Used machine Year of construction 1991 Equipment and technical data: Edge banding machine for pre-coated edge material High-performance hot air blower Electromagnetic roller cutter Hebrock system edge trimmer End trimming: Trimming module for flush cutting the front edge overhang edge overhang Feed: 3-roller system Delivery on both sides Attachment trolley, mobile Dsln Hcovimxgja Ejcg max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 170 mm min. Workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for operation: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 2003, operating hours: 601 h, Functionality: fully functional, total length: 5,300 mm, workpiece height (max.): 42 mm, total width: 900 mm, edge thickness (max.): 3 mm, total height: 1,300 mm, overall weight: 2,100 kg, compressed air connection: 6 bar, working height: 800 mm, power: 12.5 kW (17.00 HP), input current: 400 A, Method of operation: hot melt adhesive, hot-cold process on one side in right-hand version. Edging thickness: 0.2 - 12 mm Workpiece dimensions: Minimum width 70 mm Minimum height 8 mm Maximum height 42 mm Minimum length 160 mm strip edges 60 mm edges endless from the roll 150 mm with double cutting device Operating voltage: 400 volts, 50 Hz Throughput speed: 12 m/min. Glue application: via application roller Working height: 800 mm Air connection: 6 bar 1/4" Extraction connection: 1 central extraction nozzle, diameter 160 mm Machine dimensions: Machine height: 1300 mm Machine width: 900 mm Machine length: 5300 mm Machine weight: 2100 kg Total connected load: 12.5 kW Machine equipped with: - Double roller top pressure with electronic positioning. - Individual feed for strip and solid edges. - Automatic roll magazine for rolls up to 800 mm in diameter with pneumatic cutting device up to 3 mm thick. - Rapid heating tank for hot melt adhesive granulate. Heating time 8 min. With electronic temperature control. - Automatic reversal of the glue dosage (same and opposite direction for thin or solid edges via PLC. - Automatic infeed ruler, therefore no manual adjustment work required for edge thickness. - Control All units can be pneumatically controlled from the central control panel networked with the PLC. Any faults are immediately displayed in plain text on the control panel (e.g. lack of compressed air or triggering of a motor protection switch). High operating comfort thanks to modern and practical control in the human-machine dialogue. Program memory with name and number program. JOINING PROCESSING PART - for joining chipboards with 2 HF motors 1.5 kW, 12000 n, working in parallel and counter-rotating, automatically controlled incl. DIA MAX DIA joining set diameter. 85 x 30 x 42, Z 3 LEUCO system for panel thicknesses up to 42 mm DOUBLE CROSS-CUTTING DEVICE - with 2 HF motors 0.3 kW, 12,000 n 2 automatic positions = 0 + 3 degrees 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 FLUSH MILLING DEVICE - for flush milling solid edges and pre-milling plastic and veneer edges. One-sided scanning With 2 HF motors 0.43 kW, 12,000 n 2 HM reversible insert heads 70 x 20 x 16 mm, Z 4 FINE MILLING DEVICE - with 2 HF motors 0.3 kW, 12,000 n, two-sided scanning, Dsln Hovygu Njca Escg automatic control. With quick-change device for upper and lower longitudinal milling of radii Tool: 2 pcs. AT 73 - HM - rounding cutter heads Diameter 73x16x16 mm, Z 3, for profile cutters R2 - R5 DRAWING BLADE DEVICE - two-sided scanning, automatic control. For stripping rounded PVC and plastic edges. CORNER ROUNDING DEVICE - with 2 motors, 0.35 kW 12000 n, 200 Hz, two-sided scanning, 1 work spindle each for top/bottom with 2 radius cutter heads AR 73, 73 x 16 x 16, Z 3 (for profile cutters R 2 - R 5)

Condition: good (used), Year of construction: 2021, BIESSE STREAM A Smart 5.0a Single-sided edgebander Description; Brand: Biesse Type: Stream A Smart 5.0 Dcoln Hcowc Suroa Esg Year of manufacture: 2021 PRE-MILLING UNIT FI-502 Symmetrical diamond tools H=45 mm Z=2+2 30° included. END TRIMMING UNIT IT70-S REPLACING IN-801Tools included. EDGE SCRAPER UNIT RB02 WITH MANUAL ADJUSTMENT GLUE-SCRAPER UNIT RCC-701 SUPERIMPOSED BRUSHING UNIT SP-501 NC AXIS PACKAGE - GROUP OF DEVICES THAT ENABLE THE AUTOMATION OF MACHINE SET-UP FOR STREAM A SMART It includes: -AX-2, NC axes on the infeed fence and on the 1st copier of the infeed Pre-milling Unit.- -AX-1, NC axis on edge pressing rollers. -AX-4, NC axes on Fine trimming Unit RF400 replacing RF100. -NC FINE TRIMMING UNIT RF400 REPLACING RF100 UNIT SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM ANTIADHESIVE UNIT ADZ-700. PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=3+3 45°.In replacement of standard tools. ONE COIL AUTOMATIC EDGE FEEDINGNC Z axis for edge guide device included as a standard. DOUBLE GLUING SYSTEM FOR USE WITH GRANULATED EVA/PUR GLUE QM-705 PREMELTER FOR EVA GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-2, NC AXIS ON END TRIMMING IT70 DEVICE FOR THE APPLICATION OF ANTI-STATIC/COOLING LIQUID BEFORE END TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT TOP AND BOTTOM INDEPENDENT WORKING FOR FINE TRIMMING UNIT RF300-RF400 PAIR OF MULTIFUNCTION CUTTERS FOR FINE TRIMMING UNIT RF300-RF400. Possible machining operations: bevel 25° for different thin edges + R=1 mm +R=2 mm + flush solid wood trimming. LPT-700 DEVICE FOR THE APPLICATION OF SLIDING LIQUID BEFORE CORNER ROUNDING UNIT PAIR OF R=2 mm MILLING CUTTERS WITH DISPOSABLE NKIVES FOR 2 MOTORS CORNER ROUNDING UNIT AR30 NC AX-4, NC AXIS ON EDGE SCRAPER INDEPENDENT PNEUMATIC EXCLUSION OF THE TOP/BOTTOM UNIT FOR EDGE SCRAPER UNIT PRO-NESTING KIT FOR EDGE SCRAPER UNIT KIT FOR DELICATE PANELS FOR GLUE SCRAPER UNIT- Independent pneumatic exclusion of the top/bottom units.- Glue scraper knives pressure adjustment. LPT-700 DEVICE FOR THE APPLICATION OF CLEANING LIQUID BEFORE THE BRUSHING UNIT SOPHIA - IoT Connection Full description will be forwarded on request (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Eumacop mobile edge banding machine, type Eumafix-Top, with hot melt adhesive tank for efficient edging of straight and curved workpiece edges in the workshop or on the construction site. Edge thickness: 0.4 – 3 mm Dcjln Hcowhmudja Ejg Edge height: up to approx. 45 mm Feed rate: 0.5 – 4 m/min

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, Functionality: fully functional, overall weight: 2,750 kg, input voltage: 400 V, input current: 32 A, Loymeyer KAM 775S IQ Edgebander Delta 4 touchscreen control Premilling Glue station Dcjlnowf U Rzj Hca Ejg End cutting Straight/Radius unit Corner rounding Glue scraper Edge scraper Available end of May 2025

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Dcjln Hcaoq A I Aas Eeg

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Dceln Hswhuipoca Eeg Storage location: Hochheim

Condition: excellent (used), Year of construction: 2010, OTT Tornado Top Edge Banding Machine in Excellent Condition Approx. 1,300 operating hours Designed for high-precision edge banding, it offers seamless gluing for a variety of materials, from thin PVC to solid wood strips. Known for its reliable performance and flexibility, it features advanced glue application, pre-milling, and finishing units that deliver smooth, durable edges for first-class results. This machine is ideal for furniture and cabinetry, ensuring efficient production with a consistently professional finish. Technical specifications: Edge thickness: 0.4 - 12 mm Panel thickness: 8 - 60 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg Djlnsvzk Rks Hca Escg Location: ex warehouse, 54634 Bitburg - Available immediately - Sold as is, available for inspection No guarantee or warranty

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. Dcjlnsvymfbs Hca Eeg The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark Dcslnswhuldj Hca Eeg - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain - Former list price: €104,250 Location: Langen Availability: Short term