Used extruders & extrusion lines for sale (226)

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Cincinnati PAK 600 Extruder Specifications The Cincinnati PAK 600 is a single-screw extruder designed for high-throughput plastic processing applications. • Drive System: Requires two electrical drops—one for the control cabinet and another for the drive cabinet. Ledpfxswm Ngyj Ahzehb • Electrical Load: Maximum amp load depends on the standard AC motor & drive, as well as the number of barrel and die zones. Electrical engineering will determine the exact amp load based on specific configurations. • Operational Rating: Rated at a service factor (SF) of 1.0 at 1750/100 rpm.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Ljdpfxjxu U Trs Ahzshb Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 2022, condition: new, functionality: fully functional, - Grinder for e.g. lumps - New / unused machine - Open rotor Lhjdpfx Aop E Anvohzjb - Grinder 650 mm x 550 mm - Control unit Spare parts can be supplied. (sieve, knife etc.)

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries... Ledonq Di Tjpfx Ahzohb

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table Lhodpfx Asxw Tumohzjb For further information, please inquire. Price on request.

Condition: excellent (used), Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for granulating soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Lhsdpjw Iu T Tjfx Ahzjb

Condition: used, Year of construction: 2003, The Macchi 3-Layers is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands.It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP.The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers • Motors: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control (IP55) for reduced energy consumption and harmonic distortion DIE HEAD: • Model TE505 • 700 mm die diameter, die gap 1.8 mm • 4+4 heating zones with ceramic heater bands (19 + 35 kW total) • Mounted on a die cart with integrated air distribution manifold • Insert range 600–800 mm • Equipped with IBC system COOLING SYSTEM: • Dual-lip carbon fibre Karat air ring (K-Design) • ASR4 Double Flux Cooling Ring, blower 15 kW • Jet-7 IBC cooling control system - 15 kW introduction blower - 18 kW extraction blower - Bubble diameter sensor - Air balancing valves - Variable-speed inverters TAKE-OFF UNIT: • Take-off width: 3200 mm • Oscillating nips • Optional tower-mounted secondary nip with load-cell control WINDING SECTION: • Double automatic back-to-back winder • Automatic roll change • Maximum winding width: 3150 mm Lhodpfx Asx Akywehzsb FILM SPECIFICATIONS: Film width range with 700 mm die: 2000–3100 mm Thickness: 15–200 μm Output example: 3000 mm width, 100 μm LDPE → 800 kg/h ±10% LINE SPECIFICATIONS: Installed power: 550 kW, 415 V, 3-phase + neutral Screw speeds: 80/30D extruders: 0–130 RPM 100/30D extruder: 0–120 RPM Cooling water consumption: 6 L/min Compressed air requirement: 6 bar ADVANCED CONTROL & MEASURING SYSTEMS: • Doteco gravimetric dosing system Grado • Thickness profile systems (EC Plus modules): - S2 Automatic Die Control - S3 Rotating Capacitive Thickness Scanner - S4 Track Scanner - Q1 Serial communication (extruder/gravimetric values) - Q11 Printer module - Q12 Online modem diagnostics - Q7 Power consumption monitoring • K-Design VARIOcool automatic thickness control • Kundig reversing ring and thickness measurement AUXILIARY EQUIPMENT • Tower • E+L web guiding system • Corona treater AFS or 2800 station • Calibrating basket with optional supporting basket • Bubble guide GSRC 3200 (6 levels, motorized, IBC-linked) • Micro-perforation system (FBF cold needle) • Air shafts (8 pcs)

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Lodpfx Ahjx Uqyqozshb Possibility to test with your own materials.

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Lsdpfjvbvznjx Ahzehb Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Year of construction: 2020, condition: new, Feeding for granulate and powder Lhjdpfx Aefmn Ufjhzeb

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock Lhjdpohgq Ahofx Ahzjb

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm Lsdpfxeqpft Is Ahzehb - Working hours: 102.364

Year of construction: 1994, condition: used, functionality: fully functional, machine/vehicle number: 8084/77/30, Vobau saw for 800mm PVC profiles Lhedpexgh Uaefx Ahzsb

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15, IDE saw 800 mm Lhsdpfx Ahsxgh Tcezob

Condition: used, Year of construction: 1996, functionality: fully functional, IDE haul-off unit 300 mm Lhjdpoxgh R Iofx Ahzob

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 124, IDE Haul Off 500 mm Ljdsxgh Ruepfx Ahzjhb

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 245, IDE haul-off unit 300 mm Ljdpjxgh N Dsfx Ahzjhb

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 113, IDE haul-off unit 300 mm Ledpfexgh Nqjx Ahzehb

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 1006882, Soft PVC Coextruder Lhjdpfxexgh Itj Ahzsb

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: 10061195, Soft PVC Coextruder Lsdpfx Aoxgh Imehzehb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 019, IDE single screw PVC extruder Lsdpfsxgh H Aex Ahzohb

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Lsdpfxjxgh Dze Ahzshb

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Lhsdpjxghz Hofx Ahzob

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Lhsdpfx Ahexghy Nszjb

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Lhedpfx Ahoxghxrezjb