Used centering & end processing machines for sale (24)

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW Dcodpowwl I Isfx Aaaof weight of the machine ca. 3 t dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dcodpfoiamn Sex Aaajf Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: ready for operation (used), Year of construction: 2022, A capacitor winding machine Hilton Industries in a perforator design with a center-wind system is available. Tool plate: aluminum, max. winding width: 125mm, min. web width: 38mm, dielectric spindles: 10, foil spindles: 3, max. roll diameter: 203mm, bobbin core inner diameter: 76mm, spindle design: O-ring, max. spindle load capacity: 11.3kg, working height range: 690mm-740mm. Machine dimensions X/Y/Z: approx. 2450mm/2050mm/2250mm, weight: approx. 2050kg. The machine control system is defective. Documentation available. An on-site inspection is possible. Djdeyvuvfspfx Aaajcf

Condition: new, semi-automatic chamfering machine Design and manufacturing in England - automatic chuck with material sensor - automatic spindle start when the cutting head is moved - bar diameter 26-105 mm for smaller diameters, a second cutting head is required - adjustable bar support - max. chamfering / turning length 45 mm - facing & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - can be easily moved with a pallet truck - weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty CE-certified OPTION: - adjustable stop + universal chamfering tool € 1,990 Dcjdsgkah Topfx Aaajf

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm For smaller Ø, a second cutting head is required - Adjustable bar support - Max. chamfering/turning length 45 mm - Overturning & chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily movable with a pallet truck - Weight approx. 500 kg Dimensions (L/W/H) 800x500x1250 mm 1-year warranty Dcjdpfxegi Rnwe Aaaef CE certified OPTION: - Adjustable stop + universal chamfering tool € 1,990,-

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - Automatic spindle start upon cutter head movement - Max. spindle speed 1,500 rpm - Max. bar diameter 80 mm - Adjustable bar rest - Max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip tray for easy cleaning - Easily movable with pallet jack - Weight 500 kg Dimensions (L/W/H): 800x500x1250 mm 1 year warranty Dcedocacn Eopfx Aaaof CE certified OPTION: - Oil mist cooling € 3,380 - Adjustable stop + universal chamfering tool € 1,990

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 80 mm - Adjustable bar support Dedpfx Aaebwfh Ueascf - Max. chamfering/turning length 37 mm - Precision 3-jaw chuck - Large chip collection container for easy cleaning - Easily movable with pallet truck - Weight 500 kg Dimensions (L/W/H): 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool € 1,990,-

Condition: ready for operation (used), Centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round: 80 mm -Max. workpiece diameter / square: 60 mm -Centering length / unlimited -Clamping unit with self-centering vise -Spindle drive: 1.8 kW -Drill chuck -Chip tray Dcodpfx Aajyur Uzsaof -Power cable -Forklift pockets for transport Dimensions (LxWxH): 1.7x0.7x1.4 meters / Weight: 600 kg Subject to errors and omissions.

Condition: good (used), functionality: fully functional, Chamfering machine for round material / bars with a diameter of 12 - 75 mm, with concentric clamping, equipped with a Stöber variable-speed gearbox. Dedpfxsyvga Ij Aaascf

Condition: used, Year of construction: 2014, Technical details: workpiece diameter - max.: 120 mm workpiece length: 403 mm spindle speed:: 750 / 1333 U/min workpiece diameter - max.: 120 mm workpiece diameter - min.: 25 mm workpiece length - min.: 117 mm workpiece length - max.: 400 mm work stroke: 40 mm total stroke: Einheit fest: 140 mm total stroke: Einheit verstellbar: 320 mm compressed air: 6 bar total power requirement: 4 kW weight of the machine ca.: 0,980 t voltage: 3x400V / 50Hz V dimensions L x W x H: ca. 2,1 x 0,8 x 2,1 m This is a centering and drilling machine that was specially designed for one of our customer's production concepts. Dedovxrwmspfx Aaascf Functional principle: The shafts are inserted by hand in the central area and then clamped at the touch of a button, after which drilling heads move simultaneously on both sides of the shaft and drill centering holes. 2x drilling heads (right/left) with tool holder/clamping fixture Mapal clamping cartridge, center height = 220 mm (machine currently equipped with collet chuck and centering drill) Clamping range max./min.: Ø 120mm / Ø 25mm via pneumatic cylinder, manual material feed Equipment: Grid enclosure EMERGENCY OFF *

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. Dcjdpsxb Ucajfx Aaaof - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 Dcjdpfxjxt Dzpj Aaaef 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Condition: new, Year of construction: 2026, spindle speed (min.): 1 rpm, spindle speed (max.): 2,600 rpm, bar diameter (max.): 750 mm, overall weight: 18 kg, power: 1.3 kW (1.77 HP), Equipment: rotational speed infinitely variable, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Motor 220V, 1300W, Speed 0-2600 rpm stepless Standard clamping range Ø 30 - 250 mm Djdebc Sa Djpfx Aaaecf Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm Dcedpfxst Tdp Ts Aaajf width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: used, Pipe notching tool, pipe notching tool -Max. Tube diameter: 60 mm -Eccentric tension -Pipe bracket: swiveling -Dimensions: 480/160/H380 mm -Weight: 28 kg Dcjdob Dwrzepfx Aaaof

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained used machine from a screw factory Djdpfjwt Upmex Aaajcf - Horizontal end machining center for simultaneous double-sided end machining of shaft-shaped parts For further information, please inquire.

Condition: ready for operation (used), Year of construction: 1998, A complete edge processing line Julius is available. Tensile strength range: 600N-2000N/mm², strip width range: 10mm-250mm, strip thickness range: 0.35mm-2.2mm, max. strip speed: 160m/min, max. coil weight: 2500kg, max. inner coil diameter: 400mm, max. outer coil diameter: 1400mm. Documentation available. An on-site inspection is possible. Dedpfxsxxzine Aaaocf

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. Dedpfx Aasu Iww Ueaecf - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: excellent (used), Year of construction: 1976, Offered here are centring and facing tools for an Uma countersinking and centring machine of the type SZM 80/800. there are approx. 11 complete sets for 2 side machining available. Please see the pictures for more information. Attention, only the tools are offered, the machine is sold ! Purchase complete or in sets on request. Dedpfxshfww Is Aaajcf The tool holder is specially designed for UMA SZM machines.

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) Dedjri Sicjpfx Aaaecf - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine Dcedpog Umitofx Aaaef

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Dodpfx Aot Hwuvsaascf Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Dcjdsxxkd Iopfx Aaasf Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Tool feed by hand Weight approx. 6.5 kg Dedevr Ec Ajpfx Aaaocf Incl. operating instructions In wooden box Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °