Used fruit & vegetable processing machines for sale (540)

Condition: new, -available in different sizes: stainless steel wine tank 220 l Diameter: 550 mm stainless steel wine tank 530 l Diameter: 820 mm Cjdpfxeb Nu Sao Apmeri stainless steel wine tank 1100 l Diameter: 1000 mm stainless steel wine tank 2200 l Diameter: 1400 mm

Condition: new, Self-priming eccentric screw pump mounted on a running gear incl. 2/3 hose screw connection with locknut MG90/65 nozzle VA and 2/3 hose screw connection with locknut DN65/65 nozzle VA. Specifications: capacity 9 960 / 19 380 l/h power: stage 1 2,5 (3,4) kW (PS) stage 2 4,2 (5,71) kW (PS) Cjdpfx Apob Nvcpjmeri electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 270 mm width 500 mm height 810 mm weight 90 kg material 1.4301 / AISI 304 connections: in the front MG90 AG on the top DN65 AG suitable for mash

Condition: new, Nominal capacity: 400 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating approx.: 35 kW Electrical Rating: 1.4 kW Electrical Connection: 230V 50Hz (1 phase) Electrical protection: 16 A Dimensions: Length: 910 mm Codpfodix Rcox Apmjri Width: 960 mm Height: 1 850 mm Weight (heating circuit drained): 260 kg Weight (heating circuit filled): 360 kg Heating oil consumption approx.: 3,5 litres/h Max. exhaust temperature: 180°C Noise level (LW, A): 83 dB Flue gas connection: ø 150mm

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: Crodpsfdzqlefx Apmji - Performance: 200 L/cycle - Electric demands: 12 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 130 kg - IP65 certified electronics - Heat exchanger: soft water - Thermometers: 1 pcs Automatic heat control, very easy to clean. With 4pcs feet. It requires minimal maintenance.

Year of construction: 2026, condition: new, Specifications: - Power: 500 L / h (when heated from 20 ° C to 80 ° C) - Electricity requirement: 48 kW, 400 V - Material quality: WNr. 1.4301, AISI 304 Stainless steel Credefdz Dkspfx Apmei - Size: 750x1950x1170mm - Weight: 350 kg (without fuel) - Heating medium: water (soft) - IP65 certified electronics - Connectors: DN25 Hollander - with level indicator Temperature control is done at 2 points in the heating medium and once at the outlet of the product. The machine automatically controls the heating medium temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.

Year of construction: 2026, condition: new, Inclusive mixer, with silicon scrapers against burning. Automatic heat control, very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. Cedpfx Ajfd Idnepmeri Specifications: - Performance: 200 L/cycle - Electric demands: 18 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 900x800x1200 mm - Weight: 350 kg - IP65 certified electronics - Heat exchanger: food industrial glycerin - Thermometers: 1 pcs - With security valve

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h Crodpfx Apshu Ab Dsmsi The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Year of construction: 1990, condition: excellent (used), A used juice press/apple press is offered for sale. Year of manufacture: 1990s. Cedpfxoh U A Sbj Apmeri In very good condition.

Condition: new, Year of construction: 2026, machine/vehicle number: NOWA, The IMIZUNI OB-4R/5800 onion peeling machine is compatible with various manufacturers' dry-peeling machines. Its precise construction and robust design, made of stainless steel, ensure that, in addition to its production advantages, the machine is aesthetically pleasing and easy to clean, which, in turn, facilitates production while maintaining all hygiene standards. Crodpeh Hbcrofx Apmei The peeling machine's capacity: with four operators positioning the onions, it can peel 240-280 onions per minute.

Condition: ready for operation (used), For sale: a pea processing line, which includes: - Air separator - Destoner - Sieve - Flotation washer Codpfxjzhv E No Apmeri - 2 x Hydro transport systems The photos show the actual equipment being sold.

Condition: like new (used), Automatic Onion Slicer – Stainless Steel Industrial automatic onion slicer, designed for continuous and uniform slicing of onions in professional vegetable preparation and processing lines. The equipment incorporates a feeding and transport system that allows onions to be guided in a controlled manner to the cutting area, reducing manual handling and providing a regular flow of processed product. Its construction primarily in stainless steel, longitudinal structure, and protected cutting area make it especially suitable for industrial installations where hygiene, ease of cleaning, and continuous production are required. MAIN FEATURES -Type: Industrial onion slicer -Application: onions -Automatic/continuous operation -Product feeding system -Controlled transport and positioning -Mechanical cutting system -Uniform and repeatable cutting -Protected cutting area -Electric motor drive -Construction primarily in stainless steel -Robust industrial structure -Safety guards on moving parts -Design for continuous production -Accessibility for cleaning and maintenance -Integrable into complete onion processing lines PROCESS Pre-prepared onions are fed into the feeding system and automatically transported to the cutting area. The system maintains the product in a controlled position during its advance and performs the cutting using the mechanical elements installed in the machine. Once processed, the onion is continuously discharged to the next stage of production. Depending on the tooling and cutting configuration installed, the equipment can be adapted to different product preparation needs. It can be integrated with: -Hopper and feeding systems -Onion peelers -Inspection belts -Washers -Conveyors and elevators -Subsequent cutting equipment -Cookers and scalding units -IQF freezing tunnels -Weighers and dosing units -Packaging machines Crjdpfxszrglno Apmoi APPLICATIONS Especially suitable for onion processors, frozen vegetable manufacturers, canning companies, IV/V range industries, prepared dish producers, and horticultural processing companies. It can be part of an automatic preparation line that includes feeding, peeling, inspection, cutting, washing, heat treatment, freezing, or packaging. Its industrial construction and continuous operation provide a solution for automating onion slicing, increasing product consistency, and reducing manual operations. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), FAM ILC-3D Linear Dicer / Cubing Machine – Stainless Steel FAM ILC-3D industrial dicer/cubing machine, designed for continuous three-dimensional cutting of food products into cubes, strips, and other regular shapes, depending on the installed blade set and cutting dimensions. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-3D is designed to produce a uniform end product through a sequence of cuts in different directions. Its configuration is particularly suitable for lines where precision, size regularity, and continuous production are required. Its construction, primarily in stainless steel, feeding system, and interchangeable cutting unit allow it to be used in industrial plants processing fruits, vegetables, and other food products. MAIN FEATURES Csdpozxlgqjfx Apmeri -Manufacturer: FAM -Model: ILC-3D -Type: Industrial three-dimensional dicer/cubing machine -Continuous cutting system -Cutting in 3 dimensions -Production of cubes/dices -Possibility of obtaining strips and other shapes depending on tooling -Continuous product feed -Multi-stage cutting system -Interchangeable blade sets -Cutting dimensions determined by the installed tooling -Electric motor drive -Construction primarily in stainless steel -Protected cutting chamber -Robust construction for industrial use -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The product is continuously fed into the FAM ILC-3D and guided towards the cutting unit. In a typical cubing configuration, the product passes through a sequence of elements that perform the necessary cuts in different planes, ultimately producing cubes of regular dimensions. The final size and geometry depend on the combination of blades, cutting guides, and transverse cutting elements installed in the machine. It can be used for: Cubing in 3 dimensions Cutting into strips Uniform product cutting Pre-processing before cooking or blanching Preparation for IQF freezing Preparation for canning Dosing and subsequent packaging APPLICATIONS Particularly suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and producers of prepared meals who need to obtain uniform cuts on an industrial scale. Depending on the tooling and the characteristics of the product, it can process potatoes, carrots, onions, fruits, vegetables, and other food products suitable for mechanical cutting. The FAM ILC-3D offers a versatile solution for industrial lines where continuous cubing, uniformity of the final product, and the ability to adapt cutting dimensions using different blade sets are required. Machine available for inspection. Additional technical information, dimensions, blade configurations, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Turbo Pulper / Industrial Refiner MANZINI TE30 – Stainless Steel MANZINI TE30 single-stage turbo pulper, designed for the continuous refining, screening, and separation of pulps, purees, and processed food products, separating the usable fraction from skins, seeds, fibers, and other solid residues. Manufactured by MANZINI, the TE30 uses a high-speed rotary system that drives the product against a perforated sieve or screen, allowing for the production of a refined and homogeneous fraction for subsequent processing stages. Its industrial construction in stainless steel, drive by a large electric motor, and continuous operation make it especially suitable for tomato, fruit, and vegetable processing lines. MAIN FEATURES Codszxcz Espfx Apmori -Manufacturer: MANZINI -Model: TE30 -Type: Single-stage turbo pulper / refiner -Continuous refining and screening process -Separation of pulp and solid residues -High-speed rotary system -Separation sieve / screen -Continuous product feed -Separate discharge of refined product and residues -Construction mainly in stainless steel -Drive by electric motor -Closed processing chamber -Robust construction for intensive industrial use -Accessibility for cleaning and maintenance -Integrable into continuous processing lines PROCESS The previously crushed or prepared product is continuously fed into the MANZINI TE30. Inside, the rotary system drives the product against the screen. The pulp, puree, or refined fraction passes through the perforations, while skins, seeds, fibers, and other larger particles are retained and conveyed to a separate discharge. The equipment can be used for the following operations: Pulping and refining Obtaining pulp or puree Separation of skins and seeds Removal of coarse fibers Screening of product Pre-concentration preparation Refining prior to heat treatment APPLICATIONS Especially suitable for tomato processing industries, fruit and vegetable processors, and manufacturers of purees, pulps, concentrates, sauces, and other food products. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of complete extraction and refining lines. The MANZINI TE30 can be integrated with crushers, mills, preheaters, pumps, evaporators, aseptic sterilizers, and other process equipment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: Cjdpfot Hfx Asx Apmjri * Boiler output 60 kW * Hourly output up to 850 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 140 cm * Empty weight approx. 230 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: Crodot Hfyajpfx Apmei * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The inox holder of Bags has an adjustable height and can be removed. The user selects the desired filling quantity and turns the switch on so that the filling cycle can begin. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. Codpjtpxtiofx Apmeri - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel table with adjustable and removable support, with 4 adjustable feet - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling - Automatic start and stop for an external pump - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs. - Dimensions: 740x900x720 mm - Weight: 50 kg

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The user selects the desired filling quantity and turns the switch on to start the filling cycle. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling - Automatic start and stop - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Codpfjtpxtuox Apmsri Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs.

Year of construction: 2026, condition: new, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer using the DIN 25 connection. The electrical control unit is mounted on the side for easier operation. The bottle filler and the bag-in-box filler are connected to each other via two separate valves and can be used together or separately. Bag-in-box filler: semi-automatic model IBB 200, with stainless steel induction liter counter. Filling system without gravity. Volumetric pump 1.1 KW with flexible EPDM impeller. Touch screen operation for cycle setting, parameters and cleaning. Vacuum and nitrogen injections are freely adjustable in the cycle. The built-in air compressor ensures continuous operation. Technical data: Bag in Box Electrical requirement: 1.1 220V 50-60 Hz Suitable for: Ø 20 - 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Dimensions: 600x820x1600 mm Weight: 120 kg Filling system without gravity Capacity of the collection tank: 45 L Crodpfjtpxuvjx Apmoi Capacity: 670 L/h Dimensions: 580x1800x1500mm Weight: 45 kg Take a look at our website!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KPP400, General: The Potato Washing and Peeling Machine is an advanced piece of equipment specifically engineered to clean and peel potatoes efficiently in large quantities. This machine transforms the labor-intensive and time-consuming task of potato preparation, making it indispensable in the food processing sector. Key Features and Benefits: Efficient Cleaning and Peeling: The machine uses rotating brushes or abrasive surfaces to effectively remove dirt, debris, and the outer skin of potatoes. Its design ensures a thorough cleaning and peeling process, which minimizes waste and maximizes the yield of usable potatoes. Time and Labor Savings: By automating the washing and peeling processes, this machine significantly reduces the manual effort and time required. It enables food processing facilities to handle large volumes of potatoes swiftly and consistently, enhancing overall productivity. Versatility in Potato Types: The machine is adaptable to various types of Codpfx Apet A Ampemeri potatoes, accommodating different sizes and varieties. It can be adjusted to handle different shapes and ensure uniform peeling, regardless of the potato's size or texture. Gentle on Potatoes: Despite its powerful and efficient operation, the machine is designed to be gentle on potatoes, preventing damage or bruising during the cleaning and peeling process. This ensures that the final product retains its quality and appearance. Water Conservation: Many modern Potato Washing and Peeling Machines are equipped with water-saving features, utilizing efficient water circulation systems to minimize water wastage during the cleaning process. This eco-friendly approach is crucial for sustainable food processing practices. Conclusion: The Potato Washing and Peeling Machine revolutionizes the processing of potatoes in commercial kitchens and food processing facilities. Its efficiency, versatility, and waste-minimizing capabilities streamline the potato preparation process and contribute to sustainable and efficient food production, meeting the needs of contemporary food processing industries.

Condition: excellent (used), functionality: fully functional, For sale: fruit, vegetable, and mushroom grading machine in perfect working condition. Can be tested. Also available is a cooling or washing machine for fruits and vegetables. Credpfx Apjyw Ngbomji

Condition: like new (used), JBT Industrial Finisher / Refiner – Stainless Steel JBT industrial finisher in stainless steel, designed for the continuous refining of pulps, purees, and food products, allowing the separation of the usable fraction from peels, seeds, coarse fibers, and other undesired solids. This type of equipment is typically used after crushing, extraction, or preheating operations to obtain a product with a finer and more homogeneous texture before subsequent stages of concentration, heat treatment, or packaging. The system operates using an internal rotor and a perforated sieve or screen, performing continuous mechanical separation between the refined product and solid waste. MAIN FEATURES -Manufacturer: JBT -Type: Industrial finisher / refiner -Application: refining and separation of pulps Crodpfxoyz Ttme Apmji -Automatic and continuous processing -Rotary refining system -Internal separation sieve / screen -Solid-liquid / pulp-waste separation -Continuous product feed -Independent product and waste discharge -Construction primarily in stainless steel -Driven by an electric motor -Closed processing chamber -Robust design for industrial operation -Access for cleaning and maintenance -Integrable into continuous processing lines PROCESS The product, previously crushed or processed, enters the JBT finisher continuously. Inside, the rotor drives the product against a perforated refining surface. The pulp, puree, or liquid fraction that meets the required size passes through the screen, while larger particles remain retained and are conveyed to a separate discharge. This process allows operations such as: Refining of pulps and purees Separation of peels and seeds Removal of coarse fibers Reduction of undesired solids Homogenization of the texture Preparation of product before concentration Pre-treatment prior to aseptic sterilization APPLICATIONS Especially suitable for tomato industries, fruit and vegetable processors, juice, pulp, puree, concentrate, and sauce manufacturers. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. It can be integrated with crushers, preheaters, pumps, evaporators, aseptic sterilizers, and fillers. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: defective spare-parts repository (used), Urschel OV slicer Height: 1600 mm Width: 850 mm Length: 1800 mm Power supply: 400V 50Hz 3N Cedey Amw Ispfx Apmjri Power: 2.2 kW

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. Crjdpfeykam Dsx Apmsi The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Year of construction: 2017, condition: used, Leafy vegetable and herb slicer, 2 units available. When purchasing the complete set (2 units), the price is 12,000 euros net, non-negotiable. Codpfoyktdvex Apmeri

Condition: excellent (used), functionality: fully functional, Steel Potato Grinder Consists of: Cedpsyku Dqefx Apmjri - Main structure: overall dimensions: 860 x 860 x 2600 mm - Grinding unit: drum diameter: Ø 530 mm The infeed conveyor belt is not included in the set The steel potato grinder is a compact industrial device designed for reducing raw material size in processing applications. Its tall construction (2600 mm) combined with a 530 mm drum diameter allows for efficient product handling while maintaining a small installation footprint. The machine features a robust steel build, ensuring stable operation and resistance to heavy-duty use in food processing environments.