Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, workpiece weight (max.): 100 kg, gear diameter: 300 mm, controller model: Optronic CNC D140, center height: 250 mm, table length: 2,300 mm, TECHNICAL DETAILS Centre height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm Gear diameter: 300 mm Module range: 0.5 mm - 8 mm Hsdpfx Abex Hzrze Usfr Helix angle: 35° Maximum workpiece weight: 100 kg MACHINE DETAILS Control type: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Number of transport packages: 5

Year of construction: 1963, condition: used, max. wheel diameter 2000 mm gear width 0 mm max. module 0 Weight ca 700 kg dimensions of the machine ca. 2x1,2x1,5 m uncomplete machine body with drive motor. drive unit fully functional. Without Hjdjd Ngrpspfx Ab Uefr grinding unit.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm Hodpfx Asx D Ultjb Usfr max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: used, Year of construction: 2003, Technical details: max. wheel diameter: 80 mm max. module: 3 Hfedpfxewwluno Ab Usr total power requirement: 25-35 kW weight of the machine ca.: 10 t workpiece weight: 15 kg workpiece length - max.: -50....+450 mm table diameter: 145 mm diameter of hob: 90 mm cutter length max.: 220 mm hob turning speeds: 1.000 U/min

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Hfjdpfjx Hn Ensx Ab Uor Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 1999, operating hours: 67,760 h, functionality: fully functional, General Machine Information Manufacturer: Hurth / Modul Machine Type: CNC Gear Hobbing Machine (High-Precision) Control Unit (CNC): Siemens SINUMERIK 840C Year of Manufacture: 1999 Machine Weight (Approximate): 11 000 kg (11 tonnes) Total Connected Load (Approximate): 30 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 315 mm Maximum Module (Nominal for Steel): 6 mm Hodpfx Asx Ez Erjb Ujfr Maximum Hobbing Length (Axial Travel, Z-Axis): 400 mm Maximum Workpiece Weight (Table Load): 500 kg Workpiece Table Diameter: 320 mm Table Speed (Max.): Up to 250 rpm Hobbing Tool Spindle Hob Spindle Taper: SK 40 or similar high-precision taper Maximum Hob Diameter: 130 mm Maximum Hob Length: 280 mm Maximum Hob Spindle Speed: 1500 rpm Hob Spindle Drive Power (S6): Up to 25 kW Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Radial Travel (X-Axis / Cutter Infeed): 350 mm Axial Travel (Z-Axis / Hob Slide): 400 mm Maximum Shift Travel (V-Axis / Tangential): 240 mm Maximum Rapid Traverse Rate (X/Z): 15 000 mm/min Feed Rate (Axial/Radial): 0.1 to 10 000 mm/min

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Hfsdpfxowniiks Ab Uor Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, used grinding spindle with wear marks. Hodpfx Abjd Ihble Uofr

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 360 mm gear width 210 mm max. module 7 min. module 0,5 Control Burri weight of the machine ca. 9,5 t Hfodpfxsx E Dupj Ab Uor

Condition: used, Year of construction: 2018, Technical details: total power requirement: 13 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 5,25 x 4,06 x 2,94 m max. top circle diameter: 140 mm diameter of milling arbor: 22 max. length of teeth cutting: 160 mm slide travel radial ( X-axis ): 90 mm slide travel axial ( Z-axis ): 400 mm workpiece spindle bore: 40 mm 1 Gleason 100PS power skive machine, Year of manufacture: decommissioned 2018 with mounted industrial filter IFS EC1500, Serial number: 551899 1 external sediment separator Knoll KF200/640, Year of manufacture: 2017, Serial number: 1309777 1 integrated chip conveyor, with magnetic separator 1 machine automation system for loading and unloading workpieces, via an input and output conveyor system and 1 Güdel KTB-31/62 robot automation system, Year of manufacture: 2018, with 1 station for workpiece removal Hfedpox E S Uwjfx Ab Uor *

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Hfjdpfx Aox Hn Ehsb Ujr Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Hedpfx Asx Ezyvjb Ujfr Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, Year of construction: 1975, REISHAUER gear flank grinding machine AZO with balancing device AM10 Hfedpfxex Eza Ao Ab Uer

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. Hjdpsvn Unyefx Ab Uofr

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 Hjdpfoxzuziox Ab Ujfr min. module 0,5 weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: mm gear width: mm weight of the machine ca.: 7000 kg dimensions of the machine ca.: 9130 x 3895 x 3450 mm max. top circle diameter: 80 mm max. length of teeth cutting: 170 mm Total length: 240 mm taper diameter: 32 mm Hfsdpjx Ea Ipsfx Ab Uor slide travel radial ( X-axis ): 100 mm slide travel tangential ( Y-axis ): 160 mm axial movement Z-axis: 300 mm/min workpiece spindle - bore: 45 mm electr. connected load: 44 kVA

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Hedpex Hnz Nsfx Ab Ujfr Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfjdpfownib Tjx Ab Uer Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Hfjdjxt Ur Sspfx Ab Uor Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip

Condition: used, change gear bolt Hjdpfxod Ihbmj Ab Uefr

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Hfsdexrwpkepfx Ab Uer Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm Hfsdsv Santjpfx Ab Uor gear width 000 mm control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg Hfedpfox Aq Egjx Ab Uor without filter *

Condition: used, Year of construction: 1983, max. wheel diameter 1800 mm gear width 000 mm max. module 18 axial slide travel 1000 mm distance - table - arm of counterstay 1800 / 1467 mm milling spindle - taper SK 55 diameter of hob 300 mm width of hob 375 mm axis distance between spindles 100 - 1060 mm milling slide swivelling 240 Grad table diameter 1200 mm table hole 300 mm taper MK 6 min. number of teeth 9 turning speed - milling spindle 20 - 150 U/min feeds axial 1 - 1000 mm/min radial feed 1 - 300 mm/min tangential feed 1 - 225 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 M total power requirement 69 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 8,0 x 4,0 x 5,6 m Suitable for straight and helical gears, cylindrical gears and worm gears. profile milling attachment turning speed programme electronic handwheel Hfedpfev Saw Iox Ab Uor

Condition: used, max. wheel diameter 1500 mm gear width 000 mm axial slide travel 600 mm distance - table - arm of counterstay 1482 mm distance between table/spindle 1067 mm Hsdewtry Nspfx Ab Ujfr milling spindle - taper 55 diameter of hob 350 mm width of hob 400 mm axis distance between spindles min. / max. 50 / 935 mm adjustment of milling-spindle 250 mm milling slide swivelling 15 / 120 Grad table diameter 1200 mm table hole 300 mm taper MK 6 turning speed - milling spindle 25 - 150 U/min feeds axial 1 - 1000 mm/min radial feed 1 - 1000 mm/min tangential feed 1 - 500 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 total power requirement 100 kVA weight of the machine ca. 22 t dimensions of the machine ca. 10,3 x 7,4 x 5,3 m Machine has only internal milling head.