Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwsdpfxs Ain Rcj Aizjd Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), functionality: fully functional, Net price: €6,800 Internal article number: 26096 Universal tool grinding machine Deckel S11 Dodpe Ahhl Njfx Aizowd Includes dividing head (without Deckel brand dividing head) Includes documentation (electrical circuit diagram, operating manual, parts list) The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which has over 500 m² of space.

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Serial number: 2368 Manufacturer: IFS Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Dwjdpfxo Ah Swtj Aizjd Rated current: 220 A Required fuse rating: 250 A Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 810 mm, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, overall weight: 930 kg, outer diameter: 810 mm, We are offering this ready-to-use Volmer CHC 025 saw blade grinding machine, manufactured in 1995. This machine is specifically designed for the precise grinding of the front and rear faces of carbide circular saw blades ranging from 80 to 810 mm. Dedjz R Srwspfx Aizjwd If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1987, functionality: fully functional, Surface grinding machine Manufacturer: Geibel & Hotz, Model: FS 40 Primus Dwedpfx Aio Ahif Tjzjd Year of manufacture: 1987 Technical data Manufacturer: Geibel & Hotz Model: FS 40 Primus Year of manufacture: 1987 Grinding area (L x W): 400 x 200 mm Table width: 600 mm Max. workpiece weight: 150 kg Magnetic chuck: 400 x 200 mm Longitudinal travel (X-axis): max. 420 mm Transverse travel (Z-axis): 205 mm Table speed: stepless, hydraulically adjustable Grinding wheel dimensions: Ø 225 x 25 x 51 mm Voltage: 3 x 380 V / 50 Hz Dimensions: approx. 1.50 x 1.30 x 2.20 m Weight: approx. 1,200 kg Equipment - Automatic transverse feed (Z-axis) - Rapid traverse for the vertical axis (Y-axis), combined with fine adjustment via handwheel - Central lubrication - Operating manual All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2018, operating hours: 13,617 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,700 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 640 mm, grinding spindle motor power: 7,000 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Basic TECHNICAL CHARACTERISTICS: Year of manufacturing : 2018 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 3 R2 Colour touch screen: 19 ["] Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght: end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 13617 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4700 [Kg] ADDITIONAL EQUIPMENT: Calibration ball: automatic calibration of the X, Y and Z axes. RENISHAW LP2 part probe CO2 fire suppression system (to be inspected by a qualified organization at the buyer's expense) LTA oil mist extraction system, model EC 120-X-2-H (year 2023) Paper belt coolant filtration system 3-color signal tower light "ECO LOADER" automatic tool loader with its gripper system x1 pallet – Ø6 mm x1 pallet – Ø8 mm x1 pallet – Ø10 mm x1 pallet – Ø12 mm x1 pallet – Ø16 mm x1 NANN collet holder – Ref. 2.7400.2.003.010 – Collet type 3718 E x1 NANN collet holder – Ref. 2.7400.2.002.010 – Collet type 3409 E x1 SCHAUBLIN collet holder – Ref. 68-5728 – Collet type W20 x1 extended-nose collet, type 3409 E – Ø4.5 mm x1 extended-nose collet, type 3409 E – Ø5 mm x2 extended-nose collets, type 3409 E – Ø6 mm x3 extended-nose collets, type 3409 E – Ø8 mm x1 extended-nose collet, type 3409 E – Ø10 mm x1 extended-nose collet, type 3409 E – Ø12 mm x1 extended-nose collet, type 3409 E – Ø14 mm x1 extended-nose collet, type 3409 E – Ø18 mm x2 extended-nose collets, type 3409 E – Ø20 mm x1 collet, type 3409 E – Ø8 mm x1 collet, type 3409 E – Ø10 mm x2 collets, type 3409 E – Ø12 mm x1 collet, type 3409 E – Ø16 mm x5 drawbars for various types of collets x1 drawbar service wrench x2 ISO50 tool holders x2 sleeves (unidentified references) x1 clamping bell x1 set of "ECO LOADER" grippers for tools with shank diameters from Ø6 to Ø16 mm x1 set of "ECO LOADER" grippers for tools with Ø32 mm shanks x17 grinding wheel arbors (various lengths) x102 spacers for grinding wheel arbors x1 WALTER ISO50 calibration arbor x1 WALTER NCT calibration disc x1 machine parameter backup on USB flash drive x1 WALTER operator's manual (in French) x1 ToolStudio programming manual (in French) x1 WALTER electrical wiring diagrams manual x1 LTA electrical wiring diagrams manual x1 RENISHAW LP2 manual * The collet holder shown in the pictures, as well as the Ø16 mm collet are not included with the machine Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Dwodpfx Aio Ah Sycjzed The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Dodpfs Ain Iljx Aizewd Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg Dwsdpfxezlcips Aizsd If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, total width: 2,700 mm, total length: 5,400 mm, workpiece diameter between centers: 600 mm, workpiece length between centers: 2,500 mm, grinding spindle motor power: 22,000 W, overall weight: 10,500 kg, FORTUNA cylindrical grinding machine Maximum workpiece dimensions: approx. diameter 500 mm x 2500 mm long Control cabinet renewed with frequency inverter for stepless workpiece speed control Grinding spindle overhauled Grinding wheel dimensions: diameter 750 / diameter 305 Dwedpo Afwgyofx Aizsd Center bore: MK5 Tailstock: hydraulically operated Various steady rests and grinding wheel arbors Currently in operation and powered on

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Dwjde Ain Rgepfx Aized Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, JONES AND SHIPMAN EIT 1076 PRODUCTION CYLINDRICAL GRINDING MACHINE MADE IN ENGLAND CAPACITY: 250 x 700.0mm Djdpfozw U Twsx Aizowd DROP DOWN INTERNAL SPINDLE VARIABLE SPEED HEAD METRIC DIALS UNIVERSAL BED PAPER FILTRATION SYSTEM AUTO CYCLE

Condition: used, Year of construction: 1974, mechanical ja Dodpfxsy Ty Rpe Aizowd centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: good (used), functionality: fully functional, Internal article number: 26101 Universal tool grinding machine Deckel S11 Clamping surface of the tool slide: 500 x 180 mm Max. tool diameter between centers: 130 mm Max. tool diameter with free clamping in the universal dividing head: 620 mm Max. tool length between centers: 270 mm Grinding stroke: 190 mm Grinding stroke during helical grinding: 190 mm Dwsdpfxs Ahhiuo Aized Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Coarse adjustment travel: Tool holder: 220 mm Grinding head holder: 800 mm Universal dividing head on tool slide: 330 mm Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 12000 rpm Max. cutoff wheel diameter: 200 mm The machine is fully functional and can be inspected under power by arrangement in our heated warehouse of over 500 m².

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EB1507, grinding length: 600 mm, grinding width: 350 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,900 mm, workpiece weight (max.): 320 kg, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, table load: 320 kg, type of input current: three-phase, grinding wheel width: 25 mm, overall weight: 1,700 kg, grinding spindle motor power: 2,200 W, travel distance X-axis: 700 mm, travel distance Y-axis: 490 mm, travel distance Z-axis: 340 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,500 rpm, input voltage: 400 V, Equipment: documentation/manual, - Factory number: EB 1507 - Automatic vertical feed - Headstock adjustment - Belt filter system - Coolant system - Machine light Grinding length 600 mm Grinding width 300 mm Workpiece height 312 mm Table size 600 x 300 mm Maximum workpiece weight 320 kg Distance grinding spindle center - table 490 mm Table travel, longitudinal 700 mm Table travel, transverse 340 mm Table feed rate 1 - 25 m/min Speed range - grinding wheel 1500 rpm Dwsdpfxszrinle Aizod Drive power - grinding motor 2.2 kW Grinding wheel dimensions 355 x 25 x 127 mm Magnetic chuck 610 x 305 mm Headstock adjustment device Operating voltage 400 V Total power consumption 3.0 kW Machine weight approx. 1.7 t Space requirement approx. 1.90 x 1.90 x 1.90 m Hydraulic unit 0.60 x 0.35 x 0.75 m Coolant system 0.70 x 0.40 x 0.80 m

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Dwsdpfxs Ahpfbe Aizjd Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 5200 [Kg] ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.

Condition: used, Year of construction: 1979, functionality: fully functional, Ideal for sharpening lathe tools, drills, milling cutters, and other tools – a classic product of German engineering for ambitious hobbyists or workshop use. Technical specifications: • Motor No. 10651 • Power: 0.55 / 0.92 kW • Speed: 1400 / 2800 rpm • 380 V, 50 Hz • Cross slide with handwheels, swivel head with clamping device • Bellows covers for the guides • Incl. work light Please feel free to contact us if you have any questions! Djdpfo Afp Enex Aizewd

Condition: used, Year of construction: 2003, functionality: fully functional, grinding width 600 x 2000 mm table surface area ca. 600 x 2400 mm x-travel 2100 mm y-travel 550 mm z-travel 560 mm max. dia. of grinding wheel 400 mm weight of the machine ca. ca 7,8 t Dodpfx Ajzxt T Eoizjwd

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 1,800 kg, Schmidt Tempo XLC saw blade grinding machine with 2-axis CNC control and clear menu navigation. - CBN grinding wheels for deep grinding with oil cooling, including chamfering in a single clamping operation - Re-toothing or re-sharpening of HSS saw blades in a single cycle - Re-sharpening of segment saws or individual segments - Special program for wolf-tooth grinding - Grinding of variable tooth pitches - Grinding of seatings for carbide teeth - Rake and clearance angles can be freely programmed - Grinding wheel width compensation - Full encapsulation with integrated high-pressure cooling system - Diameter range from 80 to 950 mm - Saw blade thickness up to 10 mm - Includes a robust blade support (special design) - Working speed from 3 to 75 teeth/min - Possible number of teeth on the saw blade: 20-900 - Fully digital servo drives - Automatic central lubrication - Net weight approximately 1800 kg (Loading possible with a forklift) Dwodpfxe Ahzcqs Aizsd

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Dwodoz R Rpnspfx Aizsd Includes cooling system, dressing unit, and magnet.

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: rotational speed infinitely variable, Tool grinding machine Manufacturer: DECKEL, Type: S 11 Year of manufacture: 1991 Technical details Manufacturer: DECKEL Type: S11 Year of manufacture: 1991 Clamping area: 500 x 180 mm Max. tool diameter: between centers 130 mm, with overhanging clamping 620 mm Max. tool length: between centers 270 mm Grinding stroke: 190 mm longitudinal Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Spindle speed: 2,000 to 10,000 rpm, continuously adjustable Drive power of the grinding motor: 1.1 kW Total power consumption: approx. 2.2 kW Connection voltage: 400 V / 50 Hz Max. grinding wheel diameter: 125 mm Workpiece spindle mounting: SK 40 T-slots: 12 mm on the machine frame Dwsdpfx Ais Afyq Iezod Machine weight: approx. 850 kg Dimensions: L 1.60 x W 1.10 x H 1.60 m Equipment • 5-axis adjustability • Motorized height adjustment of the grinding head • Opto-electronic measuring system with 2-axis digital display • Very large range of accessories as shown in the photos • Technical documentation All information without guarantee. A demonstration under power is possible at any time in our showroom.

Year of construction: 2016, condition: used, A CNC external cylindrical grinding machine, manufactured in 1998 and modernized by GSN Schleiftechnik in 2016, is offered. Grinding length max.: 2000mm. Grinding diameter: 700mm. Distance between centers: 2000mm. Center height: 500mm. Plunge grinding length max.: 125mm. Grinding spindle drive power: 22kW. Control: Siemens SINUMERIK with SIMATIC HMI touch panel and SINUMERIK HT 2 handheld terminal. Equipped with a special clamping fixture for grinding nickel sheets, coolant supply, hydraulic power units and control cabinet cooling. Inspection possible by prior arrangement. Dwodj Ah Tybjpfx Aizod

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS Dwjdpfx Aioy Du N Uozjd PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, total width: 1,450 mm, total length: 6,550 mm, total height: 1,300 mm, Colour: Green Empty weight: 3.000 kg - Drive system: Conventional - Number of axes [pcs]: 2 - X-axis travel [mm]: 3250 - Y-axis travel [mm]: 300 - Table width [mm]: 3750 - Table depth [mm]: 400 - Max. grinding wheel diameter [mm]: 355 Dwjdpfxe Adza Uj Aizsd - Options: External cooling, Knife Sharpener - Transport dimensions: 6550mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Vibratory finishing system, manufacturer RÖSLER, year of manufacture 2000. Includes: Feeding unit 2 vibratory finishing drums Discharge conveyor Control system Dsdpfx As Aic A Doizewd Filtration system Centrifuge Sound-insulated enclosure Dust extraction and filtration system In good condition.

Condition: used, Year of construction: 2023, grinding range 1000 mm Dimensions (L/W/H) 1500x700x1600 mm Dwjdpfxe Ad Rmqj Aized Weight 900 kg