Condition: excellent (used), Year of construction: 2022, 2020 Costa Levigatrici MD6 CRR 1350 Heavy Duty Sheet Metal Deburring Machine With Multi Extraction Units, Roller Conveyors & Touchscreen Control. Working Width 1,350mm. Working Thickness 3-150mm. Feed Length 'X'=2,680, Feed Length 'Y'=1,380mm. Variable Feed Control Upto 25m/min. Motor Power 57kW. Roller Table Dimensions L3,000 x W1,480 x H920mm. Vertical Cyclone Extraction Unit W1,420 x D1,420 x H4,850mm. S/No. MC028008A (2020). With Walker Prodry Water Filtration Unit. Machine Weight 4,800kg. Location: Bowron St, Stockton-On-Tees, TS20 2BH, United Kingdom Chodpfj Ad D U Ijx Abrjd

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Serial number: 2368 Manufacturer: IFS Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Rated current: 220 A Required fuse rating: 250 A Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Chsdpfxj Ah Swte Abrjd Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Chodj Agfzbepfx Abrod Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: ready for operation (used), functionality: fully functional, total height: 1,300 mm, total width: 2,500 mm, total length: 3,500 mm, overall weight: 6,500 kg, LIDKÖPING 4B – Centerless cylindrical grinding machine Cedpfxs Ah Si Uo Abrjhd For sale is a used centerless cylindrical grinding machine from the Swedish manufacturer LIDKÖPING, model 4B. The machine is designed for centerless external cylindrical grinding of rotationally symmetrical workpieces and features a grinding wheel and regulating wheel drive, as well as hydraulic adjustment devices. Technical data: - Manufacturer: LIDKÖPING, Sweden - Model: 4B - Machine type: Centerless cylindrical grinding machine - Power connection: Three-phase, 50 Hz - Grinding wheel diameter: approx. 508 mm - Grinding wheel width: 254 or 305 mm - Grinding wheel drive: 37 kW - Regulating wheel drive: 4 kW - Hydraulic drive: 2.2 kW - Machine weight: approx. 6,500 kg - Machine dimensions: approx. 3,500 × 2,500 × 1,300 mm - Separate hydraulic unit - Workpiece feeding/transport device - SKF lubrication unit - Adjustment handwheels for the machine axes - Grinding area with protective covers - Additional control cabinet Condition: Used industrial machine with signs of wear and tear, paint chipping, and visible corrosion spots due to age and use.

Condition: ready for operation (used), grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 400 mm, distance between centers: 2,500 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 25 rpm, workpiece spindle speed (max.): 360 rpm, Newall Cylindrical Grinder 400 x 2500mm Model: LA 96 Capacity: 400 x 2500mm Wheel Size: 75 x 750mm Cjdpfx Aoz S Nmysbrehd Work Head Speeds: 25-360 RPM Machine With: 2 Steadies Swivel Table Coolant System

Condition: excellent (used), Year of construction: 2018, operating hours: 13,617 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,700 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 640 mm, grinding spindle motor power: 7,000 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Basic TECHNICAL CHARACTERISTICS: Year of manufacturing : 2018 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 3 R2 Colour touch screen: 19 ["] Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght: end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 13617 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4700 [Kg] ADDITIONAL EQUIPMENT: Calibration ball: automatic calibration of the X, Y and Z axes. RENISHAW LP2 part probe CO2 fire suppression system (to be inspected by a qualified organization at the buyer's expense) LTA oil mist extraction system, model EC 120-X-2-H (year 2023) Paper belt coolant filtration system 3-color signal tower light "ECO LOADER" automatic tool loader with its gripper system x1 pallet – Ø6 mm x1 pallet – Ø8 mm x1 pallet – Ø10 mm x1 pallet – Ø12 mm x1 pallet – Ø16 mm x1 NANN collet holder – Ref. 2.7400.2.003.010 – Collet type 3718 E x1 NANN collet holder – Ref. 2.7400.2.002.010 – Collet type 3409 E x1 SCHAUBLIN collet holder – Ref. 68-5728 – Collet type W20 x1 extended-nose collet, type 3409 E – Ø4.5 mm x1 extended-nose collet, type 3409 E – Ø5 mm x2 extended-nose collets, type 3409 E – Ø6 mm x3 extended-nose collets, type 3409 E – Ø8 mm x1 extended-nose collet, type 3409 E – Ø10 mm x1 extended-nose collet, type 3409 E – Ø12 mm x1 extended-nose collet, type 3409 E – Ø14 mm x1 extended-nose collet, type 3409 E – Ø18 mm x2 extended-nose collets, type 3409 E – Ø20 mm x1 collet, type 3409 E – Ø8 mm x1 collet, type 3409 E – Ø10 mm x2 collets, type 3409 E – Ø12 mm x1 collet, type 3409 E – Ø16 mm x5 drawbars for various types of collets x1 drawbar service wrench x2 ISO50 tool holders x2 sleeves (unidentified references) x1 clamping bell x1 set of "ECO LOADER" grippers for tools with shank diameters from Ø6 to Ø16 mm x1 set of "ECO LOADER" grippers for tools with Ø32 mm shanks x17 grinding wheel arbors (various lengths) x102 spacers for grinding wheel arbors x1 WALTER ISO50 calibration arbor x1 WALTER NCT calibration disc x1 machine parameter backup on USB flash drive x1 WALTER operator's manual (in French) x1 ToolStudio programming manual (in French) x1 WALTER electrical wiring diagrams manual x1 LTA electrical wiring diagrams manual x1 RENISHAW LP2 manual * The collet holder shown in the pictures, as well as the Ø16 mm collet are not included with the machine Machine visible under power in our premises by appointment. Cedpo Ah Sycjfx Abrehd Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, machine/vehicle number: 200070, functionality: fully functional, grinding belt width: 150 mm, grinding belt length: 2,000 mm, actuation type: electric, MULTI-TOOL (Scantool) Industrial Belt Sander – 150 x 2000 mm – Heavy-Duty – Includes 34 New Belts! Description: Chsdpfxe Ah Emte Abrsd Robust, professional belt sander for industrial use! For sale is a solid metal belt sander from the Danish premium manufacturer Multi-Tool A/S (identical to Scantool, technically closely related to GRIT/FEIN). This is the sought-after, wide 150 mm version from the robust 200070 series. Due to its heavy steel and cast construction (Industrial Heavy-Duty), the machine runs with low vibrations and offers good stability when processing heavy components. _____ ABSOLUTE HIGHLIGHT: Large belt sanding package included! With the purchase, 34 high-quality, like-new sanding belts in the 150 x 2000 mm format, worth several hundred euros, are included. Perfectly divided for rough and fine sanding: • 17x sanding belts in grit P40 (roughing / deburring): 8x red, 9x green • 17x sanding belts in grit P80 (intermediate and fine sanding): 8x red, 9x green _____ Technical Data & Details: • Manufacturer: Multi-Tool A/S (Made in Denmark) • Model Series / Type: 200070 series (for 2000 mm belt length) • Belt Sander Dimensions: 150 x 2000 mm (standard size) • Estimated Year of Manufacture: approx. 1980s / 1990s • Spare Parts Availability: generally available through specialized dealers (including GRIT by FEIN / Scantool). • Application Area: Ideal for locksmiths, metal construction, and industrial workshops for steel and stainless steel processing. Condition: The machine is in a good, operational condition. It runs powerfully, and the belt centering system functions properly. The machine can be tested on-site while powered. • The price is ex works (EXW). • Dismantling, proper loading, and transportation must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications are based on available documentation. Subject to prior sale.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 675149, center height: 175 mm, grinding length: 8,000 mm, center width: 1,000 mm, grinding wheel diameter: 450 mm, total width: 1,700 mm, total length: 3,000 mm, grinding diameter: 349 mm, workpiece weight between centers: 100 g, distance between centers: 1,000 mm, type of input current: three-phase, feed length X-axis: 320 mm, feed length Z-axis: 1,000 mm, overall weight: 3,500 kg, year of last overhaul: 2022, input frequency: 50 Hz, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 800 rpm, Control System Chedpfxo Ahv T He Abred Control system manufacturer: FANUC Control system type: FANUC 31i Working area Center height: 175 mm Distance between centers: 1,000 mm Grinding length: approx. 800 mm Max. workpiece diameter: approx. 349 mm Electrical data according to your information Connection voltage: 3400 V Operating voltage: 3400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 20.5 A Main fuse: 25T A Grinding technology according to the documentation Grinding spindle power: 5.0 kW Grinding spindle speed: 800–1,900 rpm Grinding wheels: depending on the design, up to approx. Ø 450 mm X-axis resolution: up to 0.1 µm Workpiece spindle speed range: approx. 8–800 rpm Automatic indexing: provided in the UR version Further technical data from the manufacturer's documentation Max. ambient temperature: 40 °C Max. humidity: 75 % Sound pressure level: approx. 70 dB(A) Machine weight: approx. 3,500 kg Sold without tools and without additional accessories. The machine is sold exclusively in the described basic configuration. Inspection possible by appointment. Sale ex works Syntegon. Loading and transport are the responsibility of the buyer. Sales / transfer conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Year of construction: 1998, Danobat CNC Cylindrical Grinder RP 1600 E - System 200 BTV 30 CNC Control, Year Of Manufacture 1998, Coolant, steadies & accessories, manuals, Wheel Balancer. Chjdpfx Aew A Sd Hebrod

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cedpez Rqk Rofx Abrehd Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sanding machine, equipped for wet sanding, with 2 top-mounted sanding units and one brush unit (Scotch-Brite). The machine is used for surface finishing of metal parts with a width of up to 450 mm. Chedpfoyn E H Rex Abrod The dust collection container with filter fabric is located at the bottom. Technical drawings, operating manual, and the CE declaration are available. The machine will be delivered in good, partially refurbished condition. Further technical information can be found in the document.

Condition: used, Year of construction: 1978, functionality: limited functionality, year of last overhaul: 2017, We are offering this used Klingelnberg AGW 231, manufactured in 1978. It was overhauled in 2017. Manufacturer: W. Ferd. Klingelnberg Söhne Remscheid Type: AGW 231 Serial number: 3419 Year of manufacture: 1978 Chjdpsz Rx N Iefx Abrjd The machine was overhauled in 2017 and equipped with a PLC control system. However, this control system no longer functions because the memory is defective. The machine is mechanically complete and includes change gears and indexing plates. If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GRINDING DATA Grinding wheel diameter: 120 mm TABLE DIMENSIONS Table dimensions: 210 × 110 mm MACHINE DETAILS MACHINE DIMENSIONS Codpj Ad Ivijfx Abrehd Length: 1,000 mm Width: 500 mm Height: 1,100 mm MACHINE WEIGHT Weight: 150 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Chedpfs Ahpfbjx Abrsd Total power required: 20 [kVA] Weight: 5200 [Kg] ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.

Condition: ready for operation (used), functionality: fully functional, Wire drawing polishing machine, ultrasonic / wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4-6 bar It is used to process or polish wire drawing dies through which metal wire is drawn. Chodpfx Ao Ag Dxbobrod

Condition: used, Year of construction: 1987, functionality: fully functional, Surface grinding machine Manufacturer: Geibel & Hotz, Model: FS 40 Primus Year of manufacture: 1987 Technical data Manufacturer: Geibel & Hotz Model: FS 40 Primus Year of manufacture: 1987 Grinding area (L x W): 400 x 200 mm Table width: 600 mm Max. workpiece weight: 150 kg Magnetic chuck: 400 x 200 mm Longitudinal travel (X-axis): max. 420 mm Transverse travel (Z-axis): 205 mm Table speed: stepless, hydraulically adjustable Grinding wheel dimensions: Ø 225 x 25 x 51 mm Voltage: 3 x 380 V / 50 Hz Dimensions: approx. 1.50 x 1.30 x 2.20 m Weight: approx. 1,200 kg Equipment - Automatic transverse feed (Z-axis) - Rapid traverse for the vertical axis (Y-axis), combined with fine adjustment via handwheel - Central lubrication Csdpfs Ahif Tjx Abrshd - Operating manual All information is provided without warranty. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 2016, functionality: fully functional, workpiece diameter (max.): 90 mm, spindle speed (max.): 3,450 rpm, grinding spindle speed: 2,845 rpm, Equipment: emergency stop, For sale is a precision wet cut-off grinding machine from Struers in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Struers • Model: Labotom-5 • Year of manufacture: 2016 • Disc diameter: approx. Ø 250 mm • Max. cutting diameter: approx. Ø 90 mm / 42×120 mm • Speed: approx. 2,845 rpm (50Hz) • Speed: approx. 3,450 rpm (60Hz) • Includes matching Struers Cooli-1 cooling system • The system is ideal for precise, wet abrasive cutting in the laboratory or for metallographic sample preparation. • Condition: Used, functional Codj Adu Ewjpfx Abrohd Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on truck. Errors in technical data and prior sale are reserved.

Condition: excellent (used), Amada Togu Surface Grinder Tool diameter (min.) Ø 2 Tool diameter (max.) Ø 160 Vertical traverse (mm) 200 Grinding speed: Stations A / B / C (mm/min) 0.06 Stations D / E (mm/min) 0.03 Chodpfx Abjz R A T Dsrjd Dimensions: Length (mm) 750 Width (mm) 800 Height (mm) 1920 Weight (kg) 470

Condition: good (used), functionality: fully functional, Net price: €6,800 Internal article number: 26096 Universal tool grinding machine Deckel S11 Includes dividing head (without Deckel brand dividing head) Csds Ahhl Nepfx Abrjhd Includes documentation (electrical circuit diagram, operating manual, parts list) The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which has over 500 m² of space.

Condition: like new (used), Year of construction: 2006, operating hours: 4 h, functionality: fully functional, machine/vehicle number: GB010168, workpiece weight (max.): 80 kg, type of input current: three-phase, workpiece diameter between centers: 200 mm, workpiece length between centers: 500 mm, grinding wheel width: 355 mm, spindle speed (max.): 2,000 rpm, overall weight: 2,800 kg, input frequency: 50 Hz, input voltage: 400 V, Brandnew (showroommodel) cilindrical grinder Chjdpfjw Edwdex Abrjd Brand: Supertec TYPE: G20P-50C Servicenumber: 10144 Machine weighs: 2800 kgs Dimensions: 2280 + 2280 + 1940 mm Please find the detailed specs in the pictures. If there are any questions please do not hesitate to contact AMTC and ask for Joost. Preferably during office hours from 8 AM to 16:00 PM We can can arrange transport with and external company.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection Csdpezfwl Sjfx Abrjhd 380V Dimension L (Length) 3200mm Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Csdpfs Ahq Sbjx Abrehd Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, JONES & SHIPMAN 1307 EIT Precision Toolroom Universal Grinding Machine Model 1307 EIT Maximum grinding diameter 356 mm Grinding length between centres 1016 mm Maximum swing 356 mm Workhead speeds 6 speeds, 40 – 320 rpm Grinding wheel size 300 x 25 x 127 mm Grinding wheel speeds 1750 / 2300 rpm Wheelhead motor 3 kW Internal grinding spindle speed 16,000 rpm Floor space required 3207 x 1359 mm Weight 1930 kg Supplied with: Double Swivel Wheel Slide, Double Wheelhead, Internal Grinding Spindle, 3 Jaw Chuck, 4 Jaw Chuck, Magnetic Chuck, Faceplate, 2 Point Steady, 3 Point Steady. For sale with Jet Machinery Ltd Csdpfozi Eqqsx Abrehd Jet Machinery Stock No: 27015 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Chjdpfxjy Ty Rps Abrjd

Condition: used, Danobat RT 1600 CNC Surface Grinder, Supplied New in 1990 retrofitted to CNC in 2004 with Siemens 802c CNC Control, Magnetic Chuck 1600mm x 710mm, Serial No 114. Max Grinding Length 1600mm, Max Grinding Width 700mm, Max Grinding Height (approx) 920mm, Logitudinal Travel 1700mm, Cross Travel 600mm, Fitted with 500mm Diameter x 50mm Wheel (1220RPM).  Approx Dimensions 5300mm Wide x 2280mm Depth x 3100mm high - Approx Weight 12500kgs Chedpfx Ajw A Sbxebrjd