Tajmac-France
TAJMAC-FRANCE commercialise les tours multibroches MORI-SAY, Wickman, les poupées mobiles MANURHIN K’MX et les embarreurs CUCCHI-BLT. Située au cœur de la vallée de l’Arve, elle bénéficie d’une implantation stratégique.
Toujours à l’écoute de ses clients, TAJMAC-FRANCE les accompagne durant toutes les étapes de leurs projets : De l’étude de la technologie, à la configuration machine, comprenant l’installation et la formation, suivi de la maintenance et la fourniture de pièces de rechange.
Également, en tant que vendeur de machines d’occasion (toutes marques), TAJMAC-FRANCE est un partenaire essentiel dans la revente et dans la révision de vos vieilles machines.
TAJMAC-FRANCE ne se contente pas de vos proposer uniquement des machines offrant différentes solutions productives, mais les adapte à vos impératifs de production.
Notre mission est de répondre aux exigences les plus élevées en termes de qualité, de flexibilité et de technicité.
Discover more used machines
MANURHIN K'MX SWING 1020 REBUILD 1020
Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating t ...
MORI-SAY TMZ 8/67
MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capa ...
MORI-SAY 8/42 AC remanufactured as new
- Swarf conveyor - 4 compounds slides staion 1,2,5,6 - AC speed and feed motors - New Siemens electrical panel Jfghuc9 - PLC Siemens 7.300 - ...
MANURHIN K'MX SWING 1020 REBUILD 1020
Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit,......
MORI-SAY TMZ 8/67
MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capacity Machine with : – Hirth coupling – ......
MORI-SAY 8/42 AC remanufactured as new
- Swarf conveyor - 4 compounds slides staion 1,2,5,6 - AC speed and feed motors - New Siemens electrical panel Jfghuc9 - PLC Siemens 7.300 - Hydraulic pick-up and hydraulick back b......
GILDEMEISTER GM35 n°4901/0067
Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide - 5 front spindles......
MORI-SAY 620 AC
Number of spindle: 6 Max bar diameter: 20 mm Max supply length: 100 mm Spindle speed: max 6.000 rpm Multispindle cam machine for small bar capacity with high rigidity, high accura......
MORI-SAY TM 620 CNC
MORI-SAY TM 620 CNC lathe with digital slides and its new Cucchi-BLT bar feeder Machining of medium and large series max Ø 20 mm (Ø 24 mm) Interchangeable MORI-SAY 6/20 AC equipmen......
MORI-SAY 642 AC
Number of spindle: 6 Max bar diameter: 32/42 mm Max. length of feeding: 125 mm Spindle speed: max 4.250 rpm This machine is perfect for the fabrication of medium and mass componen......
MORI-SAY 6/42 CNC
Number of spindle: 6 Max bar diameter: 32/42 mm Max. feeding length: 150 mm Spindle speed: max 5.000 rpm Cro9eaq9fr This machine combines the high productivity and robustness of t......
GILDEMEISTER GM20 3103/0056
- Gildemeister original pneumatic pick-up - Oscillating arm of resumption passage 25 - 1 detector for drill bit breakage Crv2fwxbx7 - Bar drop exclusion cylinder - Balluff BMC 8 - ......
MANURHIN K'MX 413 Swiss type lathe 413
MANURHIN K'MX 413 SWISS TYPE LATHE N°4102 YEAR 2001 WITH BAR LOADER IEMCA GENIUS 118/32 N°0200123B03 Cs2c7lsi8x......
Swiss type lath MANURHIN K'MX 920 CLEVER
The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a......
Swiss type lathes MANURHIN K'MX 732 EVO
K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power outpu......
GILDEMEISTER GM16
GILDEMIESTER GM 16 - Phase 2 - Hirth toothing - Control panel WT 510 - Short part detector C0s7tcazjv - Single hydraulic pick-up - Pick up brake - 5 front spindles, including 3 com......
TOUR SCHÜTTE SC9-26 SC9-26
Workpiece: max. clamping diam. 26 mm 6 main spindles (independent motor spindles) rated torque 18,5 Nm max. torque 50 Nm max. speed 7.000 min-1 1 subspindle and 2 spindles ......
MORI-SAY 6/32 S 6/32 S
MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditi......
INDEX MS 22-8
- Number of spindles: 8 - Bar diameter: 22 mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - Slide units 1.1: NC-controlled X and Z axes - Slide units 1.2: NC-controlled X an......
WICKMAN 1"-6
Equipment: H7ws8vvxqx Pick-up pos.6 Tapper pos.4 Chip conveyor IEMCA bar loader......
INDEX MS40C x2
Available for sale 2 lathes INDEX MS 40 C, year 2010 and 2012. with Stäubli robot 42,000 h and 50,000 h of production Bfkavllkygo Contact us if you are interested !......
GILDEMEISTER GM20AC x5 3103/0206
- Original Gildemeister pneumatic pick-up - Pick-up brake - Axial control station 5 - Passage 25 swinging arm Qmneqtny0 - 1 wick break detector - Bar drop exclusion cylinder - Ball......
MORI-SAY 6/32
MORI-SAY 6/32 check over in standart configuration complete with : Btgs800pei - 4 compound slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors ......
GM20CNC SIEMENS SINUMERIK CNC 840D
3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original Gildemeister SIEMENS SINUMERIK CNC 840D -CN - Slide station 4 and 5 -Pick-up CN - Double slide pos 6, mechanic......
INDEX MS52
Year 2007, 45,000 production hours Machine with INDEX bar guide Machine with counter spindle in 6.1 (Z axis only) no pivot No X axis in 1.2 position Backworking 3 fixed tools Hain......
INDEX MS 32-C
Used INDEX MS 32 C lathe -Machine in production -Double NCU Bhss8mc0n7y - IEMCA bar feeder - Complete axes - 2 ZS1L and ZSU rotary tool drives - Programmable inputs/outputs - Trans......
INDEX MS 22-6
INDEX MS 22-6 lathe : - Number of spindles: 6 - Bar diameter: 22 mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - Slide units 1.1: NC-controlled X and Z axes - Slide units ......