Condition: excellent (used), Year of construction: 2000, Engel ES 500/110 HL Dedpjxvnhlofx Al Soku Clamping force: 110 tons Screw diameter: 35 mm Year of manufacture: 2000

Condition: used, Year of construction: 1999, Injection molding machine Arburg 1500 T, 2-component, year of manufacture 1999. Dkjdpfx Alsz Dufqj Sju

Condition: excellent (used), Year of construction: 2004, operating hours: 88,926 h, functionality: fully functional, machine/vehicle number: 194501, clamping force: 600 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, overall weight: 2,930 kg, Equipment: documentation/manual, We are selling a very well-maintained 370C. Dksdpfxsz Dq I Ue Al Seu The machine is connected to the power supply and can be inspected at any time. 1x core pulling unit, hydraulic, Drop-off switch, Handling interface EM67

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Dedpfxjzx D Efj Al Ssku

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Dsdjz D Ttgspfx Al Seku Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Dkedez Ef N Aspfx Al Seu Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Dkodpeu Eki Sofx Al Ssu Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2006, condition: excellent (used), Electric go-kart Moog, year of manufacture 2006 Dsdpfx Aljxvnhxe Soku

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Dodev S E Dgspfx Al Soku Technische Ausstattung anfordern.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Dedpfxszxrc Ss Al Soku Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016

Condition: excellent (used), Year of construction: 1996, Arburg 220M-350-90 Clamping force: 35 tons Year of manufacture: 1996 Dsdpfxox Nwi Is Al Soku Screw diameter: 20 mm Tie bar distance: 22x22

Condition: excellent (used), Year of construction: 2009, Arburg 370 S 600-290 (2009) Dkedpfxozrvy Ue Al Sju Screw ø 35 mm 📐 CLAMPING UNIT Clamping force: 600 kN Closing force: 38 kN Opening force / increased: 24 / 160 kN Opening stroke: 400 mm Mould height min.: 200 mm Daylight max.: 600 mm Distance between tie bars: 370 × 370 mm Platen size: 510 × 510 mm Weight of mov. mould half: 360 kg Ejector force: 125 kN Ejector stroke: 125 mm ⚙️ HYDRAULICS Drive power: 15 kW Total connected load: 23,9 kW 💉 INJECTION UNIT — ø 35 mm Screw stroke max.: 150 mm Effective screw length L/D: 20 Injection volume max.: 132 cm³ Shot weight max.: 20,5 g PS Material throughput max.: 10,5 kg/h PS Injection pressure max.: 2000 bar Injection flow max.: 140 cm³/s Injection flow with accumulator: 430 cm³/s Back pressure max.: 350 / 200 bar Screw speed max.: 54 m/min Screw torque max.: 380 Nm Nozzle contact force: 60 kN Nozzle retraction stroke: 240 mm Heating zones / power: 4 zóny / 5,8 kW Nozzle heating: 0,6 kW Hopper capacity: 50 l 📦 DIMENSIONS & WEIGHT Oil capacity: 135 l Net weight: 3300 kg Electrical connection: 80 A

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ Dsdpfx Aoz Iyldol Sjku • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2006, clamping force: 2,600 kN, Controll : CC200 Clamping force: 260 t Screw dia: 40 mm Type: Multicomponent Drive: Hydraulic Dkjdpfx Aezu Smisl Sju Rotary table Machine is including robot and conveyor belt Robot: Engel ERC 23/1-F machine is in excellent condition

Condition: excellent (used), Moog Valve for Battenfeld Mod D665-404A Dkjdpfx Alex Uqzus Ssu Type P15FXHACN6AO

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Dedsx Em E Rjpfx Al Ssku

Year of construction: 2008, condition: ready for operation (used), A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement. Dkedpjzta D Hefx Al Sju

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Djdpfx Aeilhfcsl Soku

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dksder N Rh Hspfx Al Ssu

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Dksdpfx Alerc Hibe Seu

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Dsdpfx Aexyk Snjl Seku

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Dkedpfjyddy Uox Al Sju

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Dkodpfx Alsyddzfo Sju

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Dedpfxjy Sncqj Al Soku

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Dsdpfoy Tx Rbjx Al Ssku