Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Cpjdjw E E Evepfx Abuju Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,646 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It features a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine includes a linear robot system and a 9-zone hot runner mold temperature control. Consider the opportunity to buy this DEMAG El Exis S250/630-2300 electrical injection moulding machine. Contact us for more information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 950 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Max daylight (open distance): 1505 mm • Opening stroke: 675 mm • Ejector: 200 mm stroke / 80 kN force • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating power: 14.8 kW • Hybrid drive power consumption: • Total installed power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Valve gate control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9‑zone hot runner integrated • Interfaces: Printer, SPC process control • General specifications Cjdpfxsyftams Abuspu • Oil tank: 700 liters • Dry cycle: 2.00 s • Noise level: 74 dB(A) • Note from owner • Describes a hybrid high-speed machine with a larger injection unit (Type 2300 vs Type 840) than the referenced inventory machine above. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) Cpsdpfx Aeyfrb Njbuju • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system Cjdpsyfq Alofx Abuepu • Valve gate control: hydraulic (pneumatic not equipped)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW Cpodpfx Aox Nr Huobuju • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Cpsdpfsyc Ewxex Abusu Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: defective spare-parts repository (used), Year of construction: 2004, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Cpsdpfx Aboyhn Tgjuou Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Condition: excellent (used), Year of construction: 2012, operating hours: 48,925 h, Closing force: 4800 kN Screw diameter: 60 mm Cpjdoyhn Drspfx Abuou Drive: Hybrid – energy-efficient, high injection capacity Applications: Thin-walled containers made of PP/PS – Food & Non-Food

Condition: good (used), Year of construction: 2000, operating hours: 132,186 h, Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Cedpfx Aboyhnvheuspu -With dosing system -Handling robot Wittman, available as an option upon customer request Condition: good condition (Oil leak, original monitor defective)

Condition: excellent (used), Year of construction: 2004, operating hours: 97,919 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Cjdpfx Aboyhnrpsuopu Nominal current (A): 136 Rated power (kW): 75

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h Csdpsyffcajfx Abuepu • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment Cpodpfjx D I Egox Abuju • 10-way water distributor

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" Cedpfox D I Eajx Abuopu • Water distributor: 6-way

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A Cjdpfx Aoydpvbsbujpu • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h Cjdpfeydnp Hjx Abuepu • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN Cjdjydnigspfx Abuspu • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2022, clamping force: 3,430 kN, screw diameter: 60 mm, total height: 2,397 mm, overall weight: 21,000 kg, product length (max.): 8,073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine. • Installed heating power: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 • Interfaces: Euromap 67, Euromap 73Clamping unit: • Distance between tie bars: 810 × 810 mm • Platen dimensions: 1050 × 1050 mm • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kNInjection unit: Cpodpfx Aboydnbpjueu • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa • Theoretical injection volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm • Nozzle contact force: 39.0 kN

Condition: ready for operation (used), Year of construction: 2013, clamping force: 800 kN, screw diameter: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. A vertical injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Engel Insert 200V/60 rotary vertical injection moulding machine. Contact us for more information. Cpedpfx Absx D H Awsuou Screw diameter 25 mm.1.) Clamping forceClamping force: 600 kNOpening stroke: 338 mmEjector stroke: 105 mmEjector force: 20.1 kN2.) DrivePump drive power: 15 kW3.) Injection unit 1Screw diameter22 mm25 mm30 mm35 mmMax. swept volume53 cm³69 cm³99 cm³135 cm³Max. screw speed480 rpm (for all diameters)Current screw speed480 rpm (for all diameters)Injection rate80 cm³/s (22 mm)104 cm³/s (25 mm)149 cm³/s (30 mm)203 cm³/s (35 mm)Injection rate increased53 cm³/s (22 mm)68 cm³/s (25 mm)98 cm³/s (30 mm)134 cm³/s (35 mm)Specific injection pressure2221 bar (22 mm)2090 bar (25 mm)1451 bar (30 mm)1066 bar (35 mm)Specific injection pressure increased2402 bar (22 mm)2404 bar (25 mm)2205 bar (30 mm)1620 bar (35 mm)Nozzle stroke530 mmNozzle contact pressure28.3 kN

Condition: ready for operation (used), Injection Moulding Machine WINDSOR (Germany) Model: W2700 Year of manufacture: 1986, overhauled in 2018 Clamping force: 27,000 kN (2,700 t) The capacity can be increased up to 3,200 t! Opening stroke: 2,180 mm Installation height: 500 mm Platen size vertical: 2,750 mm Platen size horizontal: 1,900 mm Tie bar spacing vertical: 1,400 mm Tie bar spacing horizontal: 2,240 mm Centralization DS / AS: 250 mm Max. injection volume: 15,300 / 48,000 ccm Screw diameter: 175 mm The machine can be inspected under power. Cedpfxeyf Imuj Abujpu ___ Our general terms and conditions (GTC) apply. The seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: used, Year of construction: 2017, clamping force: 250 kN, displacement volume: 570 cm³, injection pressure: 2,470 bar, overall weight: 14,500 kg, load hours: 22,900 h, screw conveyor diameter: 55 mm, terms of delivery: FCA Pegnitz delivery time: on request Cedpfx Aexv D Tkobujpu terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2012, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2012 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Max. Hubvolumen: 113 ccm³ Spritzteilgewicht 102 g/PS Steuerung: CC200 Ausstattung: Csdpfxsx Ddd Sj Abuopu -1 x Kernzug -Ausblasventil -Schutzzaun -Förderband

Condition: good (used), Year of construction: 2011, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 330/110 TECH Baujahr: 2011 Schließkraft: 110 Tonnen Holmabstand: HOLMLOS Cjdpfjx Ddgmjx Abuepu Schnecken DN: 35 mm Max. Hubvolumen: 151 ccm³ Spritzteilgewicht 136 g/PS Steuerung: CC200 Ausstattung. -1 x Kernzug -Ausblasventil -Schutzzaun -Förderband

Condition: excellent (used), Year of construction: 2014, operating hours: 38,500 h, functionality: fully functional, machine/vehicle number: N/A, clamping force: 100 kN, screw diameter: 42 mm, clearance between the columns: 570 mm, column diameter: 570 mm, injection weight: 250 g, Romi Sandretto Plastic Machine 100T year 2014 In Very Good Condition The Machine Did Low Hours Fully Serviced Csdpfxjx Tc Drs Abuopu

Condition: excellent (used), Year of construction: 2005, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Codpfx Ajxyq S Usbuspu Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Codpoxl Hi Tefx Abuspu