Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm Kdedpfx Acsx Nr Ryjpeu • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm Kdsdpsx Nr R Hofx Acpou • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: excellent (used), ARBURG cylinders – like new / from a stock of refurbished parts We have three ARBURG cylinders available. These cylinders come from a stock of refurbished parts and were kept exclusively as backup/spare parts in storage. As a result, they are in like-new condition. Kodpfoxy Sx Nsx Acpsdu Available: 1 x 18 mm 2 x 20 mm If you are interested or have any questions, please do not hesitate to contact us. The price is per piece.

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm Ksdpfx Aezkttcscpjdu 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Kdjdpfx Acozfhx Aspou Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: ready for operation (used), Year of construction: 2016, clamping force: 350 kN, total width: 1,973 mm, total height: 3,040 mm, overall weight: 5,200 kg, product length (max.): 1,300 mm, Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details. Kdsdpfsztdwwsx Acpsu - CM 40/130V/60V Unilog B6- Hydraulic System Pressure: 247 / 210 bar- Pneumatic System Pressure: 6 bar- Rated Voltage: 400 V (3~N)- Control Voltage: 24 V DC- Frequency: 50 Hz- Rated Current (1st supply / 2nd supply): 78 A / 73 A- Max. Fuse Rating gl-gG (1st / 2nd supply): 80 A / 80 A- Short Circuit Current Rating SCCR: 10 kA- Working Height: 1000 mm- Total Height: 3040 mm- Machine Base Footprint: 1300 mm x 1060 mm- Total Width (including safety door swing): 1973 mm- Safety System: SICK C4000 light curtain barrier- Mold Clamping Dimensions: CM400, EBH-100, Width-100

Condition: ready for operation (used), Year of construction: 2023, operating hours: 260 h, clamping force: 550 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12" color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details. General • Operating Hours: Approx. 260 h • Machine Condition: Working Injection Unit • Screw Diameter: 25 mm • Screw Type: Nitrided Thermoplastic Screw • Barrel: Bimetallic • Nozzle Radius: 10 mm • Nozzle Bore Diameter: 2.5 mm • Stainless Steel Material Hopper • Manually Sliding Material Hopper • Feed Throat Temperature Control • Dosing Signal Output • Ceramic Heater Bands • Hot Runner Controller: 8 Zones • Temperature Control Channels: 8 Clamping Unit • Centering Ring Diameter: 100 mm • Mounting Plate Threads: M16 • Euromap Standard: Euromap 2 • 3-Stage Central Ejector • Central Lubrication for Mould Height Adjustment • Pneumatic Ejector: Included • Pneumatic Core Pull Control: 1 • Core Pull Connector: Euromap 13 (HAN 16A) Ksdpfjznu Ddex Acpodu • Water Circuits: 6 Control & Electrical • Control Unit Brand: KEBA • Display: 12" Color TFT Touchscreen • Power Supply: 400 V • Frequency: 50 Hz • Main Switch: 4P+PE Automation & Accessories • 3-Axis Linear Robot: TLRE03-650, (optional, not included) • Robot Payload: 3 kg • Pneumatic C-Axis • Mechanical Robot Interface: Euromap 18 • Electrical Robot Interface: Euromap 67 • Vacuum Circuits: 2 • Compressed Air Circuits: 2 • Automatic Lubrication of Main Axes • Robot Protection Class: IP67 • Emergency Stop: 1 • Conveyor Belt Dimensions (optional, not included): 2000 × 400 × 1100 (+100) mm • Safety Fence Dimensions (optional, not included): 800 × 1000 × 2000 mm • Spare Parts Kit with Non-Return Valve (optional, not included)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 9,145 h, clamping force: 900 kN, screw diameter: 36 mm, total width: 1,130 mm, total height: 1,650 mm, overall weight: 3,500 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details. • Injection Unit • Screw L/D ratio: 20:1 Kdjdpfxeznu Icj Acpsu • Theoretical shot volume: 153 cm³ • Injection weight (PS): 139 g • Injection rate (PS): 108 g/s • Injection pressure: 196 MPa • Plasticizing rate (PS): 12.6 g/s • Screw speed: 0–290 rpm • Clamping Unit • Mold opening stroke: 320 mm • Distance between tie bars (H × V): 360 × 360 mm • Maximum mold height: 380 mm • Minimum mold height: 150 mm • Ejector stroke: 100 mm • Ejector force: 33 kN • General Data • Maximum pump pressure: 16 MPa • Pump motor power: 13 kW • Heater power: 6.3 kW • Hopper capacity: 25 kg • Oil tank capacity: 190 l

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, screw diameter: 32 mm, This Dr Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine is from 2007 and has relatively few operating hours for its age. - Brand: Dr Boy - Model: 55M - Year of manufacture: 2007 - Screw diameter: 32 mm - Shot volume: 96.5 cm³ Kedozuk E Dspfx Acpedu - Clamping force: 55T - Operating hours: 24,210

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Kjdpfx Acjyzylvjpjdu Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: ready for operation (used), Year of construction: 2011, clamping force: 400 kN, screw diameter: 18 mm, overall weight: 5,850 kg, controller manufacturer: ENGEL, controller model: n/a, This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits Ksdpfxox D Nm Ee Acpsdu • Ejector travel: 105 mm • Nozzle travel: 380 mm • Turntable diameter: 1200 mm • Rotary table drive: hydraulic • Ejector drive: hydraulic • Connected load: 22 kw • Maximum opening 520mm /minimum opening 185mm Extra Information Machine still under power

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg Kodpfjw Ebpwjx Acpjdu

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing force: 30 tons Year of manufacture: 1992 Screw diameter: 32 Kedpfx Aceuh U Izspjdu Injection volume: 64 g

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Kdedpfotwmv Sox Acpou Year 1986 Scrow 22mm EC 88

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm Kdjdpfx Asz D U Skecpsu L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN / 850 t Control system: MC5 Closing system: hydraulic-mechanical, twin-platen Robot: KraussMaffei LRX 500 Robot Z-axis: 4,000 mm Robot X-axis: 1,500 mm Robot Y-axis: 1,250 / 1,250 mm Closing unit: twin-platen hydraulic-mechanical system with 4 pressure pads and 4 locking units on the moving platen Mold closing force: 8,500 kN Mold opening force: 560 kN Dimensions of mounting platens (H × V): 1,600 × 1,600 mm Distance between columns (H × V): 1,140 × 1,140 mm Mold opening stroke: 1,600 mm Minimum mold height: 500 mm Maximum mold height: 1,100 mm Maximum clearance / opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: 12000 Injection unit adjustment: PV Plasticizing system: complete system for processing thermoplastics Screw diameter: 135 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle orifice diameter: 9 mm Maximum injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight for PS: 6,098 g Injection rate: 1,414 cm³/s Rated power of pump motor: 132 kW Kdjdpoz Eh U Usfx Acpju Dry cycle time according to EUROMAP 6: 965 1/h Oil tank capacity: 2,440 l MC5 control system: color monitor, integrated control panel, USB port/data storage Net weight including control cabinet: approx. 49 t Machine dimensions / footprint (L × W × H): 11.72 × 2.92 × 2.71 m Additional equipment: KraussMaffei LRX 500 linear robot

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Kedozx D E Espfx Acpsdu Immediately available!

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Kdsdpfx Aozx D Hpecpou Core pulls: 1x Hot runner system: 6x Without conveyor belt

Condition: excellent (used), Year of construction: 2014, Clamping force: 180 t Screw diameter: 35 mm Screw diameter 2: 18 mm Shot volume: 35 cm3 Injection pressure: 1943 bar Distance between tie bars: 630 x 630 mm Platten dimensions: 890 x 890 mm Type: Multicomponent Kjdpszypadsfx Acpodu Drive: Electric

Condition: excellent (used), Year of construction: 2010, Clamping force: 160 t Screw diameter: 30 mm Screw diameter 2: 18 mm Distance between tie bars V: 520 mm Kdsdpfszyp A Sjx Acpsu Distance between tie bars H: 520 mm 1x core puller 9x hot runner controler Type: Multicomponent Drive: Hydraulic

Condition: not inspected (used), Year of construction: 1999, total length: 6,700 mm, total width: 1,700 mm, overall weight: 6,630 kg, Equipment: documentation/manual, Used ARBURG Allrounder 470 C 1300-675 injection moulding machine, manufactured in 1999. The machine was in fully operational condition and functioned reliably before being decommissioned. It has been stored for approximately 4 years and has not been in regular operation during this period. The machine is now being sold as is. Due to the storage period, inspection and servicing are recommended before commissioning. Kdsdpfx Acjz I Rv Hspeu

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, mold height (min.): 190 mm, ejector force: 20,100 N, ejector stroke: 105 mm, total height: 3,554 mm, overall weight: 6,700 kg, Clamping force: 60t Year of manufacture: 2010 Injection unit 200 Screw diameter: 30 mm Specific injection pressure: 1451 bar Injection volume: 99 cm³ Pump motor power: 15 kW Tool closing unit 600 Clamping force: 60 t Tool plate dimensions: 1200 mm (rotary table) Ejector force: 20.1 kN Ejector stroke: 105 mm Tool height: 190 mm Opening stroke: 335 mm Weight: 6700 kg Control system: CC200 Vertical injection molding machine with rotary table Equipment: - Vertical design with rotary table, 2 mold positions - Rotary table Ø 1200 mm - Moving platen 990 x 575 mm, M16 threaded grid - Screw Ø 30 mm - Injection flow rate 149 cm³/s, boosted pressure 2205 bar - Screw speed up to 480 rpm - Nozzle stroke 530 mm, nozzle clamping force 28.3 kN - Nozzle opening Ø 3 mm, nozzle length 50 mm - Min. mold height 190 mm - Max. machine height 3554 mm Kedpfjz Hmc Hex Acpsdu Typical applications: overmolding of connectors, contacts, cable ends, sensors, and threaded and metal inserts.

Year of construction: 2005, condition: used, Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible. Kdsdpfxezybvde Acpou

Year of construction: 1995, condition: used, Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible. Kedpfozzqcpsx Acpodu

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Kdedpfozzqmnsx Acpsu