Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Ndjdpfx Ahoh Dr E Te Ejc Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300 CX, year 2010 The machine is equipped with: - Handling system from manufacturer Wittmann - 3 temperature control units (with water) - Conveyor belt - And the machine itself Ndsdpoxqd Nzsfx Ah Eoc

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Ndjdpoxn S Tpofx Ah Eoc

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Njdpfx Ahexg Uikj Eedc Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, operating hours: 62,680 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 254 cm³, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, opening stroke: 500 mm, heating capacity: 28.7 kW (39.02 HP), Arburg 470C-1500-400 (250) injection molding machine with sorting flap Number: 250 Availability: in stock Year of production: 2007 Nedpfx Ahexnazhs Eedc Producer: Arburg Screw diameter [mm]: 45 Injection weight [g]: 232 Injection pressure [bar]: 1580 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 28.7 Working hours [h]: 62680 Weight [kg]: 4900 Dimensions [mm]: 4500 x 1700 Feed hopper: NO

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 54109, if you have any questions about the machine, please contact us Nodpfx Ahexlhtte Eodc

Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Ndsdpsh Dp R Esfx Ah Eec Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 Ndjdpfx Asxqd Iwoh Eec The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 2012, clamping force: 320 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 14,500 kg, load hours: 69,990 h, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ndedpfx Ahexl Hi Te Esc

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Ndjdpfexl Tz Aex Ah Esc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, clamping force: 2,000 kN, overall weight: 8,200 kg, Equipment: documentation/manual, This fully electric injection molding machine will be showcased as an exhibition model at K 2025 in Düsseldorf from October 8 to 15, 2025, and will be available for purchase afterward. We look forward to your inquiry and are confident that our offer will fully meet your expectations. If you are interested in other machine sizes or configurations, please feel free to reach out to us. We are certain we can provide you with an optimal and cost-effective solution. Powerjet was founded in 1999 and is headquartered in Guangdong, China. The company exports 65% of its manufactured machines to 45 countries worldwide, ensuring full customer satisfaction through excellent service and aftersales support. _____ Nodjwbtkrspfx Ah Ejdc This fully electric injection molding machine will be presented as an exhibition model at K 2025 in Düsseldorf from October 8 to 15, 2025, and will be available for purchase afterward. We look forward to your inquiry and are confident that our offer will fully meet your expectations. If you are interested in other machine sizes or configurations, please do not hesitate to contact us. We are confident that we can offer you an optimal and cost-effective solution. Powerjet was founded in 1999 and is headquartered in Guangdong, China. The company already exports 65% of its machines to 45 countries worldwide and always ensures complete customer satisfaction through excellent service and after-sales support.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Nsdpfx Asxqywhjh Esdc Price: On request

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, machine/vehicle number: 221240, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course Nsdpfx Aewg Tt Roh Ejdc - All machines offered can be viewed in our warehouse

Condition: used, Year of construction: 2009, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: Ndjdpfx Asxpufdeh Eoc Description SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Demag 210: Screw diameter Ø 50 mm

Condition: used, Year of construction: 2010, clamping force: 500 kN, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, overall weight: 24,500 kg, load hours: 15,000 h, screw conveyor diameter: 80 mm, terms of delivery: EXW (ex Works) delivery time: on request Ndjdpfx Ahsxluk Es Eec terms of payment: 100% prior to delivery

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Immediately available! Njdpfjxl Tzcex Ah Eodc

Condition: good (used), Year of construction: 2017, Type BOY 55A Pro #59638 Year of construction 2017 Operating hours ± 8,000 hours Screw diameter 38 mm Maximum injection pressure 1,508 bar Maximum shot volume 136.1 cm³ Clamping force 55 t Maximum distance between tie bars 360 x 335 mm Minimum mould height 250 mm Maximum distance between plates 650 mm Dimensions 2,700 x 1,100 x 1,700 mm (L x W x H) Weight 2,350 kg Ndedpfsxa Aw Aex Ah Eec Options • Procan ALPHA (1) display • Pneumatic integrated sprue picker • 6-way electrical distribution box • Single air program ✅

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Ndodpfxexqywbj Ah Eec Price: Upon request

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 Designation: SGM Operating hours: 29,125 Cycle counter: 26,530 Total cycles: 3,562,329 Nsdpfxsxpudms Ah Eedc Cylinder heating, electric drives Sumitomo Demag IntElect 150/520-610 Demag 150: Screw diameter Ø 45 mm

Condition: used, Year of construction: 2017, clamping force: 480 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,500 kg, load hours: 12,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Nsdpfx Ahexlukxj Ejdc terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2009, 520 S 1600 - 290/290 Complete thermoplastic cylinder, 35 mm, highly wear-resistant Complete thermoplastic cylinder, 35 mm, highly wear-resistant, for 2nd injection unit Drive unit with 30 kW motor and 65 l/min pump delivery rate Accumulator module with 64 l storage capacity (max. 230 bar) Selogica direct control system Technology level: accumulator drive Multi-component processing 2nd injection unit 290 vertical Open nozzle 25 mm Open nozzle 35 mm Open nozzle 35 mm for 2nd injection unit Submerged nozzle tip for open nozzle Electrical and hydraulic actuation of NVD in mold for 1st injection unit Electrical and hydraulic actuation of NVD in mold for 2nd injection unit Heating band for open nozzle Heating band for open nozzle for 2nd injection unit Heating/cooling jacket for open nozzle Variable clamping plate set, Ø 125 mm Minimum installation height expanded to 450 mm Blow-out unit 1 with pressure reducer Selection unit incl. connection Ejector pressure P/Q controlled (prerequisite: T2) Core pull 1, parallel movement P/Q controlled, programmable Core pull 2, parallel movement P/Q controlled, programmable Electric core pull control 1 (prerequisite: VE 436/00) Ndedpfxexl Ty Ej Ah Ejc Top guard open, increased to safety dimension Start-up inspection hydraulic accumulator Continuous oil cooling and filtration Increased cooling capacity Parting plane device on short supports for 2nd injection unit Nozzle contact force controlled, programmable for 1st injection unit Nozzle contact force controlled, programmable for 2nd injection unit Conveyor belt connection electric via socket combination Emergency stop interface 1 to 24-pole interface, 2-channel Emergency stop interface 2 to 24-pole interface, 2-channel Temperature release up to 450°C and reinforced cylinder heating Basic equipment for control of electric axes Host computer interface ARBURG 8 programmable digital inputs/outputs on terminal strip Interface for mold temperature control unit 20 mA Connection cable for REGLOPLAS temperature control unit Serial USB printer interface External PC keyboard with USB interface Additional floppy disk drive via USB interface CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Holder for PC keyboard with USB connection Injection with mold closed ("flying injection") 3 measurement circuits for mold temperature 15 electric heating control circuits for mold heating Device interface Start-up parameters Post-pressure switching channel 3 on fixed mold plate Interface for colouring unit LSR unit interface via 6-pin Harting connector Interface for colouring unit for 2nd injection unit Interface for vacuum control Vacuum control with vent function Vacuum monitoring via analog signal Vacuum unit 40 m³/h Kit for connecting mold to vacuum valve Interface for flow monitoring for cold runner system Energy monitoring and power consumption display 2 cooling water circuits laid to fixed mold plate 2 cooling water circuits laid to moving mold plate 4 manual cooling circuits Basic equipment for 2nd cooling water distributor (manual) 7 manual cooling circuits for 2nd water distributor Machine-related cooling circuits controlled Equipment package: advanced monitoring Equipment package: advanced movements Equipment package: production control Equipment package: optimization / operator aids Equipment package: quality assurance Equipment package: documentation aXw Control ScrewPilot for 1st injection unit aXw Control ScrewPilot for 2nd injection u

Condition: used, Year of construction: 2010, Arburg Allrounder 470 H 1000-170, year of manufacture 2010 Ndsdpfx Ahsxpubls Eec Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Shot weight: 77 g With Arburg robot

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz delivery time: on request Ndjdpfxsxluk Se Ah Eec terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2024, as-new injection moulding machine from Dr Boy 50 E, year 2024, with only 2 operating hours Njdoxpuauopfx Ah Esdc

Condition: used, Year of construction: 2017, Arburg 470S 1100-290, year 2017, 2-component machine. The machine has been idle for some time without a contract. It is from 2017 and has only around 21,600 operating hours. The machine features a clamping force of 1100kN; the lower unit is equipped with a 290 injection unit with a 35mm screw, while the upper unit has a 100 injection unit with a 30mm screw. Up to now, only ABS and TPE materials have been processed. The machine is equipped with an integrated hot runner system and three core pulls, as well as additional options. Included in the scope of delivery is a Kuka handling robot, which is operated via the machine’s Selogica control system, along with the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale. Ndsdpjxpuanefx Ah Eoc