Used laser cutting machines for sale (376)

Condition: good (used), functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, 6 kW Bodor Laser Cutter. 2 Years old with low usage (less than 4 hours per week). Comes complete with mezzanine floor to raise chillers, air compressors and extractors out of the way. Cuts up to 20mm thick hardox on Oxygen. Cuts up to 6mm mild steel on Compressed Air. Automatic door and work bed. Manual part trays underneath. Rcedpfez Niv Aox Abuoh

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Rjdpfj Afwzwjx Abuoch Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Redps Adzppefx Abujch Machine weight: approx. 15,000 kg Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: good (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision Cutting, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 19,520 h, laser power: 10,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 11,900 mm, total width: 5,700 mm, total height: 3,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 10 kW Bystronic fiber laser – Swiss premium technology, available from 01.03.2027. We are selling our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production – no dealer, no middleman margin. The machine is in production until handover, so you can inspect it under power and watch it cut your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminium up to 30 mm, brass 15 mm, copper 12 mm – one machine from thin to thick sheet • Dynamic Edition: 120 m/min axis-parallel, 170 m/min simultaneous – high throughput for series and rush jobs • Automatic nozzle changer with 64 positions + Detection Eye: shorter set-up times, low-manned production possible • Shuttle table (25 s change time): load and unload while the machine cuts • Dust extraction included • List price of this configuration: over EUR 750,000 TECHNICAL DATA • Manufacturer / model: Bystronic ByStar Fiber 3015 Dynamic Edition F10000 • Year: 2017, made in Switzerland, CE • Laser source: fiber 10,000 W (range 1,000–10,000 W), 1060–1080 nm • Sheet size: 3,000 × 1,500 mm • Working range X / Y / Z: 3,100 / 1,580 / 100 mm Rodpfxsz Smfhs Abuech • Repeatability: 0.025 mm (ISO 230-2) • Max. workpiece weight: 1,100 kg • Control: Bystronic ByVision Cutting with 21.5" touchscreen • Operating hours: 39,770 h / cutting hours: 19,520 h (as of 10/2026, read directly from the control – photo available) • Total weight: approx. 12,000 kg • Dimensions L × W × H: approx. 11,900 × 5,700 × 3,200 mm EQUIPMENT Bystronic cutting head V2, Spot Control, collision protection, automatic nozzle centering, nozzle cleaning, ByPos Fiber, Cut Control Fiber, Piercing Jet, laser diode pointer, scanning, chiller with tank heating and tropicalization, UPS, Condition Messenger, Maintenance Messenger, cutting plan editor, Restart Manager, cutting parameter assistant, OPC interface, hand-held control unit, complete documentation. AVAILABILITY Ready for collection from 01.03.2027. You can reserve the machine now and prepare floor space, foundation and financing at your own pace – handover takes place on the fixed date, as soon as our new machine is delivered. Good 10 kW Bystronic fiber lasers are rare on the used market. Whoever inspects first has the best chances. Location: 51709 Marienheide (NRW, Germany). Price net ex works (EXW), negotiable. Sale to businesses only, without any warranty. Errors and prior sale excepted. All information without guarantee. Call or write to us – we will gladly send you more photos and videos of the machine in operation and arrange an inspection appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. Rcjdpsz Ii A Sofx Abujh SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 22,000 h, machine/vehicle number: 10060677, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, laser type: fiber laser, laser source manufacturer: IPG, laser source model: Modul, laser hours: 13,500 h, laser power: 6,000 W, laser wavelength: 1 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,100 mm, table width: 1,700 mm, table height: 900 mm, travel distance X-axis: 1,560 mm, travel distance Y-axis: 3,090 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 50 m/min, workpiece weight (max.): 920 kg, input voltage: 400 V, input current: 75 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 12,000 kg, total length: 10,500 mm, total width: 6,200 mm, total height: 2,500 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, BystarFiber with ByTower (storage tower) and ByTransExtended (automation). Cooling can be installed as a platform above the machine. The machine is serviced annually by Bystronic, and all laser modules have already been replaced. Rjdpfxoz S Nb Re Abujch

Condition: used, Year of construction: 2016, Amada M2 RI 3015 for sale Low hours Full service completed with Amada 4Kw Resonator Dust extraction Chiller Compressor Latest Amada touch screen control Erwin Sick perimeter guards Head clean system Really good machine.pplease feel free to contact me if you have any additional questions open this machine. Thankyou for taking time to look at this CO2 laser with rotary system Rcjdpfx Ajzh E Hvjbujh

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system 2 CCD cameras Rcsdpfsy Ed S Isx Abujh Teka extraction unit ECO-Cube

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: SF3015H, laser power: 1,500 W, Equipment: documentation/manual, safety light barrier, Cutting of Steel, Aluminum, Stainless Steel Perfect for beginners Maintenance support provided by the Dutch importer. The machine is currently installed. Senfeng Fiber laser cutting machine Laser 1.5 kW – IPG (Swiss) Exchange table 1500*3000 Laser wavelength 1060mm – 1080mm Positioning accuracy +/- 0.03mm/m Repeated positioning accuracy +/- 0.02mm/m X/Y/Z axis travel 1500mm/3000mm/220mm Max. positioning speed 100m/min Max. movement velocity 120m/min Control system/Nesting software Cypcut Acceleration 1.5G Working voltage 380V/50Hz Fiber laser cutting head (Auto Focus) Senfeng Brand Driver system Schneider (France) Linear guide system THK (Japan Brand) Transmission system Dual Rack & Pinion type Reducer Motovario (French Brand) Pneumatic component SMC (Japan Brand) Rcodezwvrhspfx Abujh Water chiller unit Tongfei/Teyu (China)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year of manufacture: 2008 Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Accuracy: +/- 0.1 mm Length: 9,300 mm Width: 4,600 mm Redozy Huxopfx Abuoch Height: 2,000 mm Weight: 13,140 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Rcedpfoyfl U Nox Abuoh

Condition: excellent (used), Year of construction: 2012, control type: CNC control, controller manufacturer: Mazatrol, laser power: 4,000 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, overall weight: 12,700 kg, total length: 8,500 mm, total width: 4,500 mm, total height: 2,800 mm, Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Automatic sheet loading and unloading system – Large overhead gantry with integrated sheet handling equipment, suitable for automated material transfer. Mazak CELL 510 VA automation system – Separate automation control cabinet, identified by its nameplate and operating panel. Automatic pallet changer / shuttle table – Two cutting pallets allow material preparation and unloading while the machine processes another sheet. Dust extraction equipment – Large extraction ducting and associated equipment visible, although the complete filtration installation cannot be verified. Safety enclosure – Perimeter safety fencing with access gates and emergency-stop controls around the automation system. Machinery manufacturing: Producing machine covers, brackets, panels and structural components. Automotive industry: Manufacturing brackets, components and prototype parts. Agricultural machinery: Producing parts for tractors, trailers and agricultural equipment. Construction and steel fabrication: Cutting connection plates, mounting brackets and structural parts. HVAC and ventilation: Manufacturing ventilation components, panels and ductwork. Electrical cabinet manufacturing: Cutting enclosures, control panels and mounting plates. Main technical specifications Working area: Approximately 3,050 × 1,525 mm Rcsdpfx Ae Agfxnjbujh Mild steel cutting capacity: Up to 25 mm Stainless steel cutting capacity: Approximately 12 mm Aluminium cutting capacity: Approximately 10 mm Working area X Axis: 3050mm Working area Y Axis: 1525mm Working area Z axis: 150mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4000kW / Amp Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Sheet master loading arm:yes Dust collector: yes Length: 8500mm Width: 4500mm Height: 2800mm Weight: 12700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, workpiece weight (max.): 200 kg, Equipment: CE marking, documentation/manual, The SheetMaster is in good condition. Rsdpfx Abeymr Hnjusch

Condition: excellent (used), Year of construction: 2017, laser power: 8,000 W, working range: 4,000 mm, Trumpf 8kw fiber laser Rcodpfxjrhit Uo Abueh Manuf: Trumpf Model: 5040, L69 Resonator: 8kW Fibre Year: 2017 Format: 4000mm x 2000mm Laser on: 41310 Beam on: 26517 Liftmaster, load / unload with loading pad and single cart system. Auto Nozzle Changer. If you need any further information please get in touch.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: 3000w, type of cooling: water, compressed air connection: 1 bar, Equipment: cooling unit, dust extraction, Raycus fiber laser cutting machine for sale with a brand new, warrantied laser source, new lens, and new water chiller. The machine also includes an exhaust system and a voltage stabilizer. It can be tested in Hungary, or we can provide an online demonstration. Redoy I Sd Dopfx Abujch

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 10,399 h, machine/vehicle number: 1897, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2025, This 3-axis Bystronic BySprint Fiber 4020 4kW was manufactured in 2019. It offers a maximum sheet size of 4000 x 2000 mm and a powerful 4000-watt laser. If you are seeking high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 4kW machine. Contact us for more information. • Machine features a new cutting head (April 2026) • Max. sheet size: 4000 x 2000 mm Additional equipment • ByLoader (included) Rodpfxjy I Strs Abusch

Condition: excellent (used), Year of construction: 2012, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, working range: 4,000 mm, Used fully serviced, clean cutting Bystronic Bystar 4020 6kw 4metre x 4metre flat bed industrial cnc laser for sale Rcodsqcu Avjpfx Abush High powered Bystronic Bystar 4020 4metre x 2metre cnc laser for sale Power: 6kw / 6000 watt / Bylaser 6000 Cutting area: 4000mm x 2000mm Year / new: 2012 Fully serviced with Bystronic and well maintained With rotary axis for cutting steel tube Cutting heads: 5inch, 7.5inch and 7.5inch long head In good working order, can be seen in production Delivery, installation and tuition can be quoted Ideal for cutting thick stainless steel, mild steel and aluminium

Condition: ready for operation (used), Year of construction: 2024, laser power: 12,000 W, number of axes: 3, This 3-axis Bodor P3-G3 fiber laser cutting machine was manufactured in 2024. It features a powerful 12,000W laser, providing efficient cutting capabilities for various materials. If you are looking to get high-quality cutting capabilities, consider the Bodor P3-G3 machine we have for sale. Contact us for further details. Rcjde Adu D Hepfx Abush Length of work table: 3000mmWork table width: 1500mmWorking table capacity: 1450kgTable type: Interchangeable - automaticMaximum acceleration: 4.0GMaximum speed: 200m/minMachine dimensions: 8840*2240*2520mmMachine weight: 6500kg +/- 10%Maximum cutting thickness: 45mm (Black steel), 40mm (stainless steel), 40mm (aluminum)

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection rating: IP54 Power: 16kW/17 kVA Redpswq Rhmjfx Abujch 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: excellent (used), functionality: fully functional, Several tools are available, including a V1300 and a TruBend 7036. See images. Location: Berlin Availability: Upon request, no later than the end of October. Additional images available upon request. Ideally, everything would be sold as a package. Rjdpfxoz Dvi De Abuech

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0012, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection class: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Rcodpjwq Rmpefx Abush Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a robust and powerful laser system, perfectly suited for demanding industrial applications. It features high precision and efficiency, enabling fast and high-quality cutting operations on various materials. Thanks to its compact design, the system can be easily integrated into existing production processes.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Rcjdex Ap A Repfx Abujh Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 22,000 h, laser type: fiber laser, laser power: 6,000 W, L5-30 L5 system with 6kW Laserpower Options: GF Grids with mild steel slats CRS Scrap collection bins SiX System control and management Rcodpfx Abezh Hlmoush FLR60L 6000 W high power-density fiber laser source with cooling unit ASF Fume extraction ACUT Compressed air cutting APC2 Adaptive process control FACE.L Salvagnini HMI for managing the laser system SIMFIBER Laser cutting process simulator IOT connected Activation of cloud connection Cutting limits: Mild steel (S185JR,S235JR, RAEX 250 C LASER) 20 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301) 20 mm Aluminum (Al 99.5 EN AW 1050A) 20 mm Copper (Cu-ETP CW004A H040 EN1652) 8 mm Brass (CuZn37 CW508L H055 EN1652) 8 mm

Condition: used, TRUMPF Mobile Laser Marking System / Mobile Laser Marker TRUMPF TruMark 5010 Mobile Marker Mobile fiber laser marking system with a hand-held processing unit For sale is a used mobile laser marking system from the manufacturer TRUMPF. The system is suitable for the permanent marking of metallic components, for texts, barcodes, Data-Matrix codes, graphics, and logos, as well as for industrial applications in production and quality assurance. Technical data: Manufacturer: TRUMPF Laser Marking Systems AG Type: TruMark 5010 Mobile Marker Device type: Mobile laser marking system / Fiber laser Year of construction: 2014 Laser medium: Yb:Fiber Wavelength: 1062 ± 3 nm Pulse repetition frequency: 1–200 kHz Pulse duration: 250 ns Max. Marking area size: 50 × 30 mm² Min. Focal diameter: 70 µm Beam quality M²: < 1.6 Electrical connection: 100–230 V / 50–60 Hz Power consumption: 2.5 / 5 A Power rating according to nameplate: 600 W Typical power consumption at rated power: 210 W Protection class: IP40 Dimensions: 460 × 1200 × 980 mm (W × H × D) Weight: 90 kg Processing unit: Dimensions: 190 × 320 × 490 mm (W × H × D) Weight: 5 kg Length of connecting hose: 1.7 m Laser safety class: 1 for metallic workpieces Extraction: integrated Equipment: Hand-held laser processing unit Mobile chassis Integrated touch display Integrated extraction Yb:Fiber laser TruTops Mark operating/marking software Connecting hose Original TRUMPF product documentation Accessories as shown in the pictures Application areas: Laser marking of metallic components Component marking Traceability Static and variable texts Barcodes Data-Matrix codes Graphics and logos Prototype construction Sheet metal fabrication Automotive industry Aerospace industry Scope of delivery: 1 × TRUMPF TruMark 5010 Mobile Marker Hand-held processing unit Touch display Integrated extraction TRUMPF product documentation Accessories as shown in the pictures Condition: Rcjdpoz Eh Eysfx Abujh Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Rjdpfx Abjydq Hneusch Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).