Used Material testing for sale (495)

Condition: good (used), LAC Heating oven SV6000/25 Temperature range +20 to +250°C Ceb Ejuugaqeuftiegt TESTO software Weight: 1750 kg 6000 liters Outer dimensions 2850×2000×3700 mm Test chamber dimensions 2000×1500×2000 mm Oven switch 100/3 Max. Floor load 2000 kg Circulation 3000 m3 /h Nominal power 66 kW Nominal current 98 A Voltage 3/N/PE 400/230V AC 50 Hz Weight 1750 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: ARL-1100 Air-cooled climatic test chamber Temperature range: -40 °C to +180 °C Heating rate of change: up to 4.7 K/ min. Cooling rate of change: up to 4.4 K/ min. Cgob Eufst Sug Hstijt Humidity range: 10 to 98% r. h. Internal dimensions: Width 1100 mm Height 1000 mm Depth 1000 mm External dimensions: Width 1300 mm Height 1955 mm Depth 2005 mm approx. 1100 liters Rated current: AC 400 V 3φ, 50Hz 23 A Weight approx. 600 kg Refrigerant: R404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Cgsb Eusun Rr Rjftist Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), TIRA Type: Walk-in climate simulation cell TCZ 4020 S-2k Technical data: Temperature range -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 19m³ External dimensions (WxDxH) approx. 2660mm X 4960mm X 3300mm Test chamber (WxDxH) approx. 2270mm Χ 3190mm Χ 2756mm Door opening (WxH) approx. 2270mm X 2756mm Condition: gebraucht / used Csb Eueuviumsftiogt Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, LDS Type: V875 Shaker System V875-440 LPT600C with amplifier SPA40K Shaker for medium forces Technical data: Armature dimensions: 440 mm Headexpander 850 * 850 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600 kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Deflection ± 25.4 mm Vibration tests: Sinusoidal Noise Shock Amplifier SPA40 Sliding table: WxHxD mm : 1400 mm x 1250 mm x 2200 mm Work surface: 600 mm * 600 mm Thickness of the top : 37 mm Weight of the top: 27.4 Max load : 500 kg Condition : gebraucht / used weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Sliding table 4760 kg Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Ceb Eufjuxcugjtiegt We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Ceb Eufeuzva Ujtisgt Type: EGN28-6CWL Espec temperature water cooled Temperature test chamber N series Power supply: AC 400 V 3-phase 50/60Hz 38A Temperature range -70 to +180°C Temperature change rate Heating 10 °K/min Cooling 5.5 °K/min Internal dimensions W x H x D in mm 1000 x 1000 x 800 External dimensions W x H x D in mm 1205 x 1920 x 2159 Useful volume 800 liters Refrigerant R-404A Refrigerant R- 508A Weight: approx. 695 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgsb Euftsu Hf H Isijt

Condition: used, Heraeus Vötsch Type: VTV 7060-10 Heraeus Vötsch temperature test chamber water-cooled ( with chamber feed-through for shaker for vibration testing ) The basic equipment, perfect down to the last detail: Operating terminal Color touch panel Microprocessor monitoring and control S!MCON/32*-NET Digital I/O, potential-free Independent, adjustable temperature limiter tmin/tmax Adjustable software temperature limiter min./max. Serial interface RS 232 Potential-free contact for test material switch-off Water-cooled cooling unit Calibration of 2 temperature values Removable base with feed-through 2 pipe feed-throughs Ø 50 mm and Ø 125 mm Vötsch temperature chamber VTV 7060-10 Test chamber capacity 600 liters Performance for temperature tests Temperature range -70/+180 °C Temperature deviation in time ±0.1 to ±0.8 K Spatial temperature deviation ±0.5 to ±2.0 K Temperature gradient 1 to 4 K Temperature change rate heating 9.5 K/min Temperature change rate cooling 10.5 K/min Thermal compensation at +20 °C 8000 W Heat compensation at -20 °C 8000 W Test chamber dimensions Width 800 mm Depth 800 mm Height 950 mm External dimensions Width 1225 mm Depth 2890 mm Height 2150 mm Height to lower edge of test chamber floor min/max 660/1380 mm Feed-through for vibrator 710 mm Ø Feed-through for vibrator 700/700 mm Cgob Eeu Tqnnjuftiot Electrical connection 3/N/PE AC, 400 V±10 %, 50 Hz Rated power 17 kW Rated current 37 A Sound pressure level - 1 m from the front 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Cgeb Euftsva Hi Hsijt We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold chamber: -65° to 0°C Heating chamber: +50 to 200°C System: Two-zone test by damper switching Temperature fluctuation ±0.5°C Hot chamber: Temperature Heating time: Ambient temp. to +200°C within 15 min. Cooling chamber: Temperature pull-down time: ambient temp. to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770(1805) Power supply: 400 V AC 50Hz: 70 A Refrigerant: R449A 5 kg R23 2.0 kg Weight: approx. 1450 kg Year of construction 2018 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Cgjb Eufovgw Uaotijt Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature and climate test chamber. Heraeus Vötsch temperature and climate test chamber with Simcon/32-NET controller and Hyfra cooling water recooler table-top unit VWK/1 TECHNICAL DATA : General specifications: Test chamber capacity: approx. 345 l Weight: 375 kg Data for mechanical stress: maximum total load of the test chamber floor 60 kg of which weighing stone 45 kg Scales + test material approx. 15 kg Storage shelves 3 kg Permissible load per shelf approx. 100 g Data for operation: RS 232 interface The RS 232 interface is used, for example, for external control via computer. Lighting Operating instructions Safety cabinet Interference emission; interference immunity Standards met see Declaration of Conformity Nominal voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 5 kW Rated current 9 A Customer-side fuse 16A slow-blow Noise measurement: Sound pressure level measured at a distance of 1 m from the front, 1m height and free-field measurement approx. 58 dB(A) Data for temperature tests: Temperature +20 to +30 °C Temperature fluctuation over time in the middle of the usable space ± 1 K Heat compensation 100 W Data for climate tests: Data for humidification system Water tank capacity approx. 10 l Water quality demineralized pH value 6 - 7 Conductivity max. 10 μs/cm Temperature +20 to +30 °C Humidity 30 to 70 % r.h. Dew point +9.5 °C / +21 °C Temperature fluctuation over time in the middle of the usable space (in steady state, according to IEC 60068-3-5) ± 3 K Type: VC 350 LAF/S Hyfra cooling water recooler table-top unit VWK/1 Plug-in units in air-cooled design. Cooling capacities from 0.8 to 3.5 kW Technical data for small appliances in table-top design VWK 7/1-S Cooling capacity 814W Air flow rate 500 m 3/h Pump type LNY 2841 Compressor output 0.27 kW Connected load 0.58 kW Maximum current consumption 6.2 A Maximum back-up fuse 10 A Current type 1/N/PE ~ 50 Hz 230 V Control voltage 230 V / 50 Hz Tank capacity 6 liters Water connection Plug-in couplings 6 and 9 mm Fully hermetic design Cooling type air-cooled Length 565 mm , width 440 mm , height 335 mm Type: VWK 7/1-S Cob Eodyaiieuftiegt Scope of delivery. (See pictures) (We reserve the right to make changes and errors in the technical data). We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer 1800 a Labinot tempering system TS. Ceb Eufjd Huqhetisgt Labinot tempering system TS 1800 400V of 3n,50hz, 3 x 35 AT Weight: approx. 920kg Type: TS 1800 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), IVA Engineering Type: M5386 Environment and stability chamber Dry Hot Air Test Chamber Cob Euod Nfrlsftiogt Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a RMS vibration vibration exciter SW 3009 with side channel blower SKP49033-01/06Type: SW 3009Condition: used / usedScope of supply: (See picture)(Changes and errors in the technical data, specifications are reserved!)We are happy to answer further questions for you on the phone. Cob Eod Talgouftijgt

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Cob Euftohv Ru Ssiegt Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch temperature and climate test chamber Here we offer a Heraeus Vötsch temperature cabinet. Heraeus Vötsch temperature chamber air cooled Test chamber volume 110 liters Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm Csb Euftjh Agt Ssiegt Outer dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ±0.1 to ±0.5 K Temperature deviation spatial ±0.5 to ±1.5 K Temperature gradient 1 to 3 K Temperature change rate cooling 3.2 K/min Temperature change rate heating 3,5 K/min Refrigerant: R-404 A / R 23 Voltage 1/N/PE AC 230V±10% 50Hz Rated power 1,8 kW Rated current 12 A Type: VT 7011 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch temperature chamber LN2 cooled (liquid nitrogen) Temperature chamber is operated with liquid nitrogen (cooled down) Temperature range -60°C to +180°C Test chamber dimensions: Depth: 575 mm Width: 550 mm Height: 645 mm Outer dimensions. Depth: 1465 mm Width: 830 mm Height: 1740 mm Test chamber volume 200 liters Mains voltage: 400V ±6/10% 3/N 50Hz Rated power : 17KW Rated current : 29A Weight approx. 350 kg Type: HT 6020/S For you as a buyer for safety the following information! Cob Eush Rd Idsftiogt The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a chamber circulating air furnace. Usable space dimensions : height mm 900 / width mm 600 / depth mm 600 324 liters Outer dimensions : height mm 1775 / width mm 900 / depth mm 953 Door leaf 1 Connected load: 3X400V 50 Hz 10 kVA Heating power: 9 kW Nominal temperature: 250°C weight: 300 kg Type: KU 250/09-06-06 K1030852 Cob Eoigg Eusuftisgt Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eliog Here we offer you a chamber circulating air furnace. Cgjbeiivgns Euftijt Usable space dimensions : Height mm 1250 / Width mm 750 / Depth mm 750 Liters : 703 Outer dimensions : height mm 2050 / width mm 1495 / depth mm 1180 Connected load : 3X400V 50 Hz 10 kVA Heating power: kW Nominal temperature: 250°C weight: 500 kg Type: KU 250 / 12-07-07 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus shock test chamber Here we offer a shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature range of the warm chamber is from +50°C to +220°C. Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Cjb Eufeikvlxjtijgt Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber Here we offer a Weiss temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test chamber designation: WT1-600/70 Outer dimensions without hinges and door lock height 1980 mm, width 1085 mm, depth 1655 mm Internal dimensions height 950mm, width 800mm, depth 800mm Test chamber capacity: approx. 600 liters cold / heat operation -70 to 180°C Temperature change per time cooling approx. 2,5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible test material weight Total load of grate supports 80kg Refrigerant: R 404A +R23 Weight: 600kg Type: WT1-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: Cgob Eufeirmg Aotiet 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Thermotron temperature chamber Here we offer you a Thermotron temperature chamber. Water cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Ceb Eeirmitsuftijgt Temperature uniformity: ± 0,5°C Temperature range: -70ºC to 180ºC Temperature control tolerance: 0.3°C Infeed dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32,4 A Refrigerant: R-404A / R23 Approx. weight: 862 kg Type: Thermotron SE- 1000-5-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Cjb Euftjiwyiwsisgt Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Ceb Eujk H Akgoftijgt Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Temperature test chamber water cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with empty test chamber Average heating time: approx. 3 K/min 8acc. to DIN 50011 part 12) Average cooling time: approx. 3 K/min 8acc. to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x height 530 mm x depth 530 mm Outer dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA power consumption: 12 A Main fuse: 3 x16 A, slow blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Cgjbelp Hyto Euftiet Refrigerant: R404A / R23 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.