Used material testing for sale (470)

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C Gtsdpfx Acsygui So Aow approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Gsdsyguh Iopfx Ac Astw Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Gedpfxeytn Hke Ac Aetw Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Gtodpfxoyglb Sj Ac Aow Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Weiss Model: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 Liters –70°C to +180°C – 44 kW – Industrial System Water-cooled For sale is a professional Weiss Umwelttechnik temperature chamber. This unit is designed for demanding environmental simulations in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research. The test chamber provides extremely rapid temperature cycling and a large test volume. Technical Data: Model: WT11-1300/70/15/S Test chamber volume: 1300 liters Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 10 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95% r.h., +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical Data: Voltage: 3/N/PE AC 400 V ±10% Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius opened) Overall height: approx. 2,020 mm Internal test chamber dimensions: Internal width: approx. 1,000 mm Internal depth: approx. 1,060 mm Gtodpfox Eknpox Ac Aew Internal height: approx. 1,230 mm Equipment: - Stainless steel test chamber 1.4301 - Viewing window in the door - Touch panel control - Access ports: R1: 125 mm L1: 50 mm - Connection for automatic water refill - Cooling water supply and return connections - Overflow/condensate connection - Safety monitoring & alarm system Ideal for: - Automotive / E-Mobility - Aerospace - Research & Development - Electronics testing - Materials laboratories / Quality assurance Volume: 1300 liters Weight: approx. 1,900 kg Important Note for Your Safety as a Buyer! The following procedures are always carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors!) We are happy to answer further questions by phone.

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1998 TK 09 Financing through our bank is also possible. Gjdjuuin Ropfx Ac Astw komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VCS 7100 Climatic Test Chamber -70°C to +180°C Manufacturer: Vötsch Type: VCS 7100 Temp. Range: -70°C to +180°C Gtjdpfx Acouuix Nj Aow Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A Height: 1980 mm Width: 1350 mm Depth: 2060 mm Chamber: Height: 900 mm Width: 970 mm Depth: 1400 mm KK-05 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Godpoph U Ayjfx Ac Ajtw Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Gedpfx Ajx Exmtjc Aetw Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Gedpfx Asxbgrgjc Aetw Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VTU 100/150 heating and drying cabinet Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature: 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Nominal current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weight: 780 kg Microprocessor-controlled temperature and program controller Jumo two-point controller Digital display of setpoint/actual temperature, plain text display Easy loading of the device floor via folding ramp Dimensions Interior: (W x H x D) 1000 x 1500 x 1000 mm External: (W x H x D) 1840 x 2389 x 1450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request! Gtsdpexbgt Dsfx Ac Ajw

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 Gtsdpfxjxal Hae Ac Aow Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Large-scale system for climate tests with S!MCON control Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. The air is drawn in under the ceiling and expelled at floor level. Sensors The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: Gtsdpfxew U Sv Ej Ac Asw - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2010, condition: excellent (used), Binder KBWF 240 Growth Chamber Features: Temperature range: 0°C to 70°C Humidity range: 10% RH to 80% RH APT.line preheating chamber technology Adjustable fan speed Humidity control with capacitive humidity sensor and steam humidification Intuitive touchscreen controller with time-period and real-time programming with internal measurement recording Display via LCD color monitor Tight-closing inner door made of toughened safety glass (ESG) with special TIMELESS coating 2 stainless steel shelf racks Lead-through opening with 30 mm silicone plug, left side Class 3.1 temperature safety device (DIN 12880) with visual and audible temperature alarm Computer interface: Ethernet Gtsdpfjvtlq Nsx Ac Aew Door heating Maximum load: 51 - 100 kg External width: 925 mm Inner width: 650 mm External height: 1465 mm Inner height: 785 mm External depth: 800 mm Inner depth: 485 mm Internal volume: 201 - 300 l Weight: 214.00 kg Year of manufacture: 2010 Manufacturer price: €27,909.06 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1997, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Item No.: 60885637 Temperature Chamber Temp. Range: -70°C to +180°C Line Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Year of Manufacture: 1997 TK 08 Financing through our bank is also possible. Gsdpfx Aouuiv Ioc Ajtw komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VCS 4100 Climatic Test Chamber -40°C to +180°C Manufacturer: Vötsch Type: VCS 4100 Temp. Range: -40°C to +180°C Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A KK-07 Financing through our bank is also possible. komplett-konzept.leasingo.de Gtsdpfxsuuiygj Ac Aew Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Gsdouuilvspfx Ac Aetw Temperature Chamber Temperature Range: +180°C Rated Voltage: 380V, +-10%, 3/N, 50Hz Rated Current: 13.5 A Rated Power: 9 kW Housing Dimensions: W 1065 x D 1560 x H 1890 (mm) Observation Window: Width x Height 350 x 640 mm Test Chamber: (L x D x H) approx. 800 x 795 x 855 mm Test Chamber Volume: 550 l Cabinet is air-cooled Caution Cabinet can only be operated as an oven. Refrigeration circuit empty and shut down. Air conditioning system shut down. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Solid state relay 21V4 Humidifier. Weight approx. 550 kg Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climatic Test Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test Chamber Capacity: 335 liters Climatic Test Chamber Temp. Range: -70 to +180°C Line Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Current: 22 A Rated Power: 12.5 kW Refrigerant (VK): R 404 A Refrigerant (TK): R 23 Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Gtsdpfx Acsuuif Nj Aew Year of Manufacture: 2002 TK-11 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1996, condition: excellent (used), Vötsch VSKZ 04/120/S Walk-In Climatic Test Chamber Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. Range: -40°C to +120°C Line Voltage: 400V Rated Current: 95A Rated Power: 56 kW Refrigerant: R 404 A Year of Manufacture: 1996 External Dimensions: W 2850 x D 4100 x H 3080 mm SO-01 Financing through our bank is also possible. komplett-konzept.leasingo.de Gsdpfxeuuigyj Ac Aotw Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. Gsdpsph U Dhsfx Ac Astw At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40  Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 ltr. Temperature range: -40°C to +180°C Outside dimensions: 110 cm wide, 173 cm deep and 204 cm high Dimensions inside: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. komplett-konzept.leasingo.de Gtedpfx Acoh Izh Is Asw Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Gtedpfx Acoyc R R Dj Asw Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Gtodjykpamopfx Ac Aow Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Gsdoxw N Uvspfx Ac Astw

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: Gtodpjycvd Nofx Ac Aow 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.