Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm Cebjv Dxxno Ezck Herb max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 2,500 mm, rotational speed (max.): 5,000 rpm, table length: 8,000 mm, table width: 2,000 mm, Equipment: documentation/manual, Sachman MP 212 Travelling column milling and boring machine with: - X-axis travel 6000 mm - Y-axis travel 1400 mm - Z-axis travel 2500 mm - Heidenhain TNC 530 control unit - Stolle table 8000 x 2000 mm - KOSMO 2.5° x 2.5° automatic head - 40-place tool magazine - 40 bar high pressure - chip conveyor - standard accessories Free extension in 12/24 months Csb Ezewa D Ixjck Herb

Condition: used, tool adaptor 88 length 560 mm center height of top slides 65 mm weight 17 kg Cjb Eov Dxzcezck Herb Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Condition: new, – ISO40 – 115/1750 V – Table 800 x 240 mm – Automatic feed on the X, Y, and Z axes. – Fast – Digital readout on the X, Y, and Z axes. – Milling head can be rotated – Cooling – Lightening Cebeqpgl Ao Ezck Hsrb – Protective cap – Emergency stop – Documentation – 400 V

Year of construction: 1988, Condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Cjb Ezcerk Aaask Horb

Condition: good (used), Year of construction: 1980, For sale: 1 piece milling machine Manufacturer: Kunzmann Type: HF6/2V Cobjq Rfqbe Ezck Herb YEAR OF MANUFACTURE: 1980 For speeds see type plate Table: 700 x 170mm Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m Ceb Ezckovwgtyo Herb This thermosymmetrical. Ergonomic. Universal ZIMMERMANN FZU32 portal milling machine is in mint condition and can be secured under power can still be secured under power at the seller. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Cjb Ezotp Nyfeck Hsrb

Condition: excellent (used), Year of construction: 2008, x-travel 1500 mm y-travel 1300 mm z-travel 600 mm Control HEIDENHAIN TNCi 530 spindle turning speed range 18000 U/min tool taper HSK-A 63 tool change unit 30 Pos. table dimension - longitudinal 2000 mm table dimension - cross 1100 mm spindle drive 26 kW column daylight 1400 mm weight of the machine ca. 19 t dimensions of the machine ca. 5 x 2,4 x 3,6 m This fpt Raid portal milling machine is in very good condition and can be inspected under power at the seller's premises by arrangement. Description: Spindle hours approx.: 15.000h Csb Ezovwgrieck Horb Tool measurement BLUM Laser

Condition: good (used), Year of construction: 1991, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Crjb Eotqclhjzck Heb

Condition: excellent (used), Year of construction: 2012, x-travel 6800 mm y-travel 3400 mm z-travel 2000 mm Control HH iTNC 530 table dimension - longitudinal 6000 mm table dimension - cross 2500 mm table load 150 t tool change unit 80 Pos. dist. between columns - front to rear 4700 mm weight of the machine ca. 80 t dimensions of the machine ca. 12 x 11 x 7 m This portal milling machine is in good condition and can be inspected by arrangement be inspected under power at the seller's premises. Description: - 80-position tool changer with 40 positions ISO SK-50 / 40 positions HSK-63A - 4-fold automatic head changer - 2 pieces orthogonal milling head OAD with: --> Patented double Hirth serration with a pitch of 0.02 degrees --> Pitch of both swivelling axes 0.02 ° --> Tool holder ISO SK-50 --> Spindle speed: 20-6000 rpm --> 46kW drive power (100% ED S1) - 1 piece 2-axis fork milling head E5E (CAC II) with: --> simultaneous !! --> HSK-63A tool holder --> swivelling range C-axis: +/- 200° --> swivelling range B-axis: +/- 100° --> drive power 37kW --> Spindle speed max. 24000 rpm, 1 vertical spindle F-400 --> Spindle speed 4000 rpm --> drive power 25kW Crebevwgpze Ezck Hob IKZ 38bar with paper belt filter 2 chip conveyors (lengthwise channelling belt conveyor 1 cross conveyor Heidenhain longitudinal measuring rods in all three axes Z-axis with 4-fold linear guide Wireless measuring probe M&H 20.41 Multi BRANKAM machine protection system CMS-100 (collision protection) Working area cover (roof) can be opened at the rear and front BLUM tool measurement Heidenhain HR 550 FS radio handwheel X and Y-axis drive via rack and 2 pinions Z-axis drive via ball screw

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Crjb Ezckjuvgnqj Hob

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm Cebjvwgl As Ezck Herb z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Csbsumcmqe Ezck Hjrb

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D Cebjvwglvj Ezck Hjrb table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: good (used), Year of construction: 1975, Deckel FP2 tool milling machine with adjustable angle table, 2-axis Heidenhain digital readout, SK 40 spindle holder. Accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Csb Ezckeuclbnj Hsrb

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Ceb Esu Ezb Eozck Hjrb

Condition: excellent (used), Year of construction: 1981, Deckel FP3 Active tool milling machine with 3-axis Heidenhain TNC 111 digital display, adjustable angle table, SK 40 spindle mount, accessories: various collets and milling mandrels, counterholder. Very good, operational condition. Can be demonstrated under power by arrangement. Csb Ezckevl E Hzs Herb

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Cjb Ezcksrazzrj Hjrb

Condition: used, Year of construction: 1972, Macmon M 100 C tool milling machine , rigid table , MK 4 spindle holder. Ready for operation, can be demonstrated under power by arrangement. Cob Ejrgplujzck Hjrb

Year of construction: 1975, Condition: good (used), Lid FP1 tool milling machine, 2-axis Sony digital display, dividing head SK40, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Ceb Ezckerhzcqs Hsrb

Year of construction: 1974, Condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Creb Ezcjq A Icqok Heb

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Ceb Ezov Azb Nsck Hsrb

Year of construction: 1978, Condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Crjb Eohtfubezck Hsb

Year of construction: 1968, Condition: good (used), Cover FP2 tool milling machine , rigid table , SK 40 spindle mounting. Long displacement milling head , Accessories : div. collets and cutter arbors.,Counterholder , Good working condition .After consultation under power demonstratable. Cjb Ejqc Tg Hezck Horb