Condition: refurbished (used), Year of construction: 1980, Portal milling machine Waldrich Siegen, original year 1980, renewed and upgraded in 2009 by SEMENS Sinumeric 840D X-8500 mm Y-3400 mm Z-800 mm W-1980 mm Horisontal passage 2350 mm Vertical passage 2280 mm Table capacity 15 t/m Main drive 75 kW Total power requested 125 kW Equipped by: 1x vertical spindle head Csliqsp Du Apey Dljrb 1x angle 90 degree head 1x universal head 1x angle 90 degree L head Various tools and tool holders

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, table width: 630 mm, table length: 630 mm, table load: 1,000 kg, overall weight: 9,500 kg, Equipment: rotational speed infinitely variable, Selling a Hermle C30U 5-axis simultaneous machining center! Built in 2011 with a Heidenhain iTNC530 control! Travels: X: 650mm Y: 600mm Z: 500mm Swivel range A: +30/-115 degrees Rotation range C: 360 degrees Equipment: Control: Heidenhain iTNC530 Spindle speed: 18,000 rpm Cslev In Uteiqy Dlsrb Spindle mount: HSK-A63 Tool changer: 32 positions NC swivel rotary table: 630mm diameter A-axis off-center 6-position rotary feedthrough 80 bar internal coolant with paper belt filter (Vario valve) Scraper belt conveyor Manual cabin door Manual cabin roof Safety screens Blum A2 tool measurement and breakage detection Heidenhain measuring probe Electrical heat compensation Chip flushing gun Bed flushing Air seal for scales Status light Pneumatic extension Release/reclamp M-functions NC stop on external signal etc. Accessories: approx. 30 HSK-A63 tool holders Heidenhain measuring probe Machine feet Complete documentation Machine will be available approximately in week 30 and ready for immediate use! Machine can be inspected under power by prior appointment. Videos can be provided upon request. Hours are subject to change, as the machine will be in production until the final cut! We will load the machine!

Year of construction: 1980, Condition: ready for operation (used), Travel X/Y/Z: 440mm/1200mm, table dimensions X/Y: 440mm/1200mm, spindle mount: ISA 40, speed: 1800rpm, feed X/Y: 630mm/min, feed Z: 224mm/min, machine dimensions X/Y/Z: approx. 2150mm/2000mm/2100mm, weight: approx. 2400kg. Documentation available. On-site inspection is possible. Crsliqov Ifvuey Dlob

Condition: used, Used CNC face milling machine Manufacturer: Line (France) Crjliqy Dovk Uh Soljb Year of manufacture: unknown, converted around 2000 Control: NUM 1060 (retrofit to new control probably necessary) Travel X (table travel): 8000 mm Travel Y (cross): 4000 mm Travel Z (head): 500 mm Travel W (vertical travel of cross slide): 2000 mm Between the columns: 3200 mm Table size: 8000 x 2800 mm Max. workpiece height: 2500 mm Machine with integrated horizontal and vertical head Milling head with ISO 50 spindle All axes on ball screw Table travel - also with ball screw Estimated machine weight: 100 - 120 tons All guides in good mechanical condition

Condition: ready for operation (used), table mounting size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle taper: ISA 40 spindle turning speed range: 40 - 1800 rpm carriages longitudinal and cross: 16 - 6630 mm/min carriages vertical: 5,6 - 224 mm/min electrical connection: 380 V, 7,5 kVA space needed: 2100 x 2000 x 2150 mm weight: 2400 kg Crslouriuxsiqy Dlsb

Year of construction: 1988, Condition: good (used), Tool milling machine make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm Crelehaq T Tjiqy Dleb with digital display

Condition: excellent (used), Year of construction: 1978, travel distance X-axis: 6,300 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,500 mm, table length: 6,300 mm, table width: 1,800 mm, spindle speed (min.): 6 rpm, spindle speed (max.): 750 rpm, table load: 68,000 kg, workpiece weight (max.): 68,000 kg, distance table to spindle center: 2,100 mm, Planer Type Milling Machine - Vertical (second hand) Manufacturer: WALDRICH COBURG Model: 17-10 FP 180 Manufact.date: 1978, generally overhauled 2013, dismantled on stock. Controls: CNC Haidenhain TNC 530i, new 2013 WORKING RANGE -MILLING- x-axis traverse 6800 mm y-axis traverse 3265 mm z-axis traverse 1010 mm w-axis traverse 1530 mm Croloflwr Dsiqy Dlob PORTAL / BRIDGE distance between columns 2450 mm-2600 mm TABLE clamping surface (left-right) 6500 mm clamping surface (front-back) 1800 mm WORKING SPINDLE / HEAD spindle type vertical spindle revolutions (min) 6 /min spindle revolutions (max) 750 /min taper fixture ISO SK 60 drive power (max) 63 kW AXIS DRIVES traverse velocity x (min) 10 mm/min traverse velocity x (max) 8000 mm/min traverse velocity y (min) 10 mm/min traverse velocity y (max) 3000 mm/min traverse velocity z (min) 5 mm/min traverse velocity z (max) 2000 mm/min feed velocity w (min) 10 mm/min feed velocity w (max) 1500 mm/min rapid traverse x 15000 mm/min rapid traverse y 4500 mm/min rapid traverse z 3000 mm/min rapid traverse w 1500 mm/min ELECTRICAL SPECIFICATIONS mains voltage 400 V mains frequency 50 Hz DIMENSIONS / WEIGHTS space requirements length 16500 mm space requirements width 6600 mm height above floor level 5800 mm TECHNICAL DESCRIPTION Planer type milling machine with hydrostatic table guidance, worm gear drive and gear rack. Passage between columns with covers = 2450 mm Passage between columns without cov.= 2600 mm Frontal Bearing diameter = 170 mm Max. distance Table - Spindle = 2010 mm Double table machine with table 1 = 3000 mm + table 2= 2500mm length Spindle travel = 1010 mm Table height above floor = 500 mm Max. workpiece weight Table 1 = 37000 Kg Max. workpiece weight Table 2 = 31000 Kg Max workpieceweight double table = 68000 Kg Regulating ranges/limits: Table 1 = 3363 mm Table 2 = 2865 mm Coupled 1+2 = 6800 mm The machine has been generally overhauled in 2012-2013 with new electric, new measuring system, new motors, new Haidenhain controls, partially overhauled hydraulics and mechanical, excellent condition, ready for most demanding work. It is sold from stock, dismantled, as is. Control panel- computer HDH 530i not included. WE OFFER SPECIAL PRICE DUE TO SPACE CONSTRAINT!

Condition: new, Universal milling machine with variable speed on vertical axis. Horizontal shaft speed adjustable by means of V-belts. Machine is delivered including: - Digital readout on 3 axes (Sino) - Feed on longitudinal and transverse displacement table - Pull rod M16 - collets set Celsg Ul Nzjiqy Dlerb - Drill chuck 3 – 16 mm incl. ISO40 B18 mounting - Adapter sleeve ISO40-MC3 - Adapter sleeve ISO40-MC2 - cooling pump - work light - Horizontal arbor ISO40 – Ø22/Ø27 - T-slot bolts M14x55 (for mounting accessories on the table) Marke: KMS Typ : VF 420 Vario Spindelaufnahme: ISO 40 Spindeldrehzahl - : Vertikal: Variabel (100-600 / 350-2000 U/min) - : Horizontal: 9 Stück (600-1350 U/min) Abstand vertikale Spindel - Säule: Einstellbar 250 - 650 mm Abstand Vertikalspindel - Tischfläche : 60 - 360 mm Abstand horizontale Spindel - Tischfläche: 20 - 320 mm Spindelverschiebung vertikal: 120 mm Tischgröße: 1000 x 240 mm Tischverschiebung: 580 x 230 mm Motor: - Vertikale Spindel 2,2 kW (3 PS) - Horizontalspindel 1,5 kW (2 PS) Maschinenabmessungen : 1500 x 1220 x 2100 mm Maschinengewicht : 850 kg Netzspannung: 400V

Year of construction: 1984, Condition: ready for operation (used), A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, speed: 2000rpm, feed: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. An on-site inspection is possible. Coliqy Dsv Ifwrjlsrb

Condition: ready for operation (used), Functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm Celiqy Djriulgslsrb spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Cslovyr R Neiqy Dljrb Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Year of construction: 1995, Condition: good (used), travels: x=1600mm Y=800mm Crjlioh Nuhrsqy Dljb Z=900mm spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of z axis present but defective.

Condition: good (used), Kondia FV-1 Motor feed 3 axis With precision vice With clamping tools x-path: 762mm y-path: 382mm z-path: 419mm Table surface: 1070 x 230 mm Crsliqysvxrhxo Dlsb Spindle holder: ISO 40 Machine weight approx.: 1600 kg

Condition: good (used), Execution : . - Clamping surface D = 400 mm - Overall height 196 mm - . - 3-jaw chuck TOS , D = 250 mm , very good condition Csliqy Dsv Auhveljrb .

Condition: good (used), CNC - universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Year of manufacture 1997 -Travel paths X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - horizontal milling device -Drilling spindle -Coolant device -Angle table -Machine housing -Documentation Dimensions: LxWxH 3.9x2x2 meters / weight 4000 kg Crjliqysv Ikluo Dlsb Errors / input errors excepted -

Condition: ready for operation (used), Functionality: fully functional, Universal milling machine CME FU-3 is a tool used to machine metal parts or other hard materials by cutting or shaping them with a rotating cutter. It is equipped with a control panel with various buttons and switches to adjust its parameters and operations. Brand CME MODEL FU3 CM TYPE UNIVERSAL CARNERO MOTORIZADO Celiqjrignwey Dlsrb TRAVELS X, Y, Z 1100 x 350 x 700 TABLE DIMENSIONS 1700 x 360 TAPER ISO 50 DIN 2080 SPINDLE ISO 50 DIN 2080 POWER SPINDLE MOTOR 7.5 MAIN MOTOR POWER 5,5

Condition: used, Year of construction: 2003, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control Heidenhain TNC124 table-size 650 x 350 mm tool taper SK 40 spindle turning speed range 0-4.000 U/min quill stroke 60 mm vertical head swivelling 90 Grad total power requirement 5,0 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,00 x 2,00 x 2,00 m Machine working, x-spindle loud in rapid traverse (see video). The machine can be viewed in our warehouse under Power. - including tool holders (see photo) - including machine feet - including LED work light - Incl. coolant container with pump - including documentation Creliqy Deui T Epoljb

Condition: good (used), Year of construction: 1990, - Universal - toolroom milling machine -second hand- - KLOPP KORRADI - UW 10 CNC - yom 1990 - working range X x Y x Z = 600 x 350 x 400mm - stroke of pinole: 63mm - tool tapper ISO 40 Celjh I Dqqjiqy Dlorb - spindle speed 40 - 4000rpm. - control: HEIDENHAIN - TNC 355

Condition: used, Manufacturer: Friedrich Engels Table size: 1400x320mm x:850mm Crslsv Tmlzeiqy Dlob y:320mm z:360mm

Condition: good (used), Boring head, spindle boring head, boring head WOHLHAUPTER , Type UPA 3 ISO 40 mounting Crolsv Aufuoiqy Dljb including Accessories according to pictures

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, AVIA FNE 50N CNC Milling Machine TECHNICAL DATA: Year of manufacture: 2006 X 1000 mm Y 500 mm Z 420 mm HEIDENHAIN TNC 410M control Table clamping area: 1000 x 500 mm Max. table load: 500 kg Max. speed: 4000 rpm Cjliqysv S D Eco Dljrb ISO 40 Operating manual Power: 15 kW Space requirement: approx. 2.45 x 2.9 x 2.3 m Machine weight: approx. 3000 kg We estimate that the machine is in very good condition and can be inspected under power by appointment. Loading included. We will assist you with the organization of transport.

Condition: ready for operation (used), Functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes Crjliqeridyrsy Dlob vise anti-vibrations

Condition: new, Drilling capacity steel ----- Ø 50 mm / (M16) Milling capacity finger cutters ----- Ø 25 mm max. Spindle milling capacity max. ----- Ø 125 mm Spindle mounting ----- ISO 40 Spindle head rotatable ----- 360 Vertical spindle speed ----- 45 - 1660 rpm (11) Distance vertical spindle table ----- 175-520 mm Traverse X axis ----- 750 mm Traverse Y-axis ----- 250 mm Traverse Z-axis ----- 400 mm Number of feeds ----- 9 Table feed X axis ----- 24-402 mm/min Table feed Y axis ----- 24-402 mm/min Z axis travel ----- 660 mm/min Work table ----- 1270 x 260 mm T-slot size/number/distance ----- 14 mm / 3 / 63 mm Max. loadable weight ----- 250 kg Motor capacity ----- 2.2 KW / 400V Weight ----- 1400 KG Celiqoga Twioy Dlerb INCLUDED * 3-axis digital readout SINO * Luxury control panel * LED lighting * Cooling system * Central lubrication * Milling cutter 32 mm * CE cover * ISO40 collet holder including collets * Various tools

Condition: used, Year of construction: 2001, x-travel 4200 mm y-travel 2750 mm z-travel 1650 mm Control Fidia C20 total power requirement / kW weight of the machine ca. 40 t required space L9,5 x B5,9 x H6,4 m Crsliqouddhcjy Dlsb Handtmann NT 300 / 220 T: - Year of construction: 2001 - Traverse paths: X - axis approx. 4,200mm, Y - axis approx. 2,750mm, Z - axis approx. 1,650mm, °C axis approx. +/-275° and A axis +95° / -120° - Fixture space: approx. 3,000mm x approx.2,200mm x approx.980mm - Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid - Table load: 1,000kg / m² table surface - Working and rapid traverse speed: max. 20m/min - Controller: Fidia C20 - Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease lubricated) - Spindle hours: 6,939 hours (as of 05/16/22) - Total hours: 76,793 hours (as of 05/16/22) - Tool changer: 2 tool magazines with 30 tool places each, max. - - Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no two sister tool places, max. tool length 280mm cover plate pneumatic - Cooling: tool spray device with a container of 19.5 l, spray head with adjustable output 0.04 - max. 2.3l/h - Tool control: Blum Laser - Wireless probe: Manufacturer M&H, type 25.10, year of construction 2021 - Exchange ball screw X - axis 10.07.2018 - Telescope cover 26.02.2019 exchanged on one side Machine dimensions: Length approx. 9,500mm (without housing) Width approx. 5,900mm Height approx. 6,400mm (Z axis extended) Weight: approx. 40,000kg

Condition: new, WMD30LV - 230V / 1F Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Crslega T Agjiqy Dlob Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set