Condition: good (used), Technical data for type UW 10 . ISO 40 mount Quill stroke 60 mm Table surface 600 x 250 mm Dksb Eevv Nk Es Tb Egol Speeds 45 - 1950 rpm Feeds 10 - 470 mm/min...continuously...adjustable... . Travel paths with feed approx.: Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm . .

Year of construction: 1980, Condition: ready for operation (used), Two identical universal tool milling and drilling machine lids are available. Travel X/Y/Z: 500mm/300mm/400mm, table dimensions X/Y: 800mm/420mm, tool holder: SK40, speed: 2500rpm, weight: approx. 1500kg. On-site inspection is possible. Dkobjv Amp Eo E Tb Egsl

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Dsbjv Iqbcj E Tb Egokl Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: used, Year of construction: 1980, x-travel 1150 mm y-travel 350 mm Dkeb E Tb Eot Uv D Eogjl z-travel 500 mm speeds 28 - 1400 U/min table surface area 1300 x 420 mm tool taper SK 40 weight of the machine ca. 3400 kg dimensions of the machine ca. 2100 x 2300 x 2400 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: ready for operation (used), Year of construction: 1992, Abene VHF 3 milling machine Abene VHF-3 Table size 1200×320 Longitudinal displacement 715 mm Transverse displacement 275 mm Vertical displacement 500 mm Speed 44-2000 rpm Automatic feed X Y Z Dkeb E Tjt E Dikob Egel Idle speed X Y Z Automatic feeding is infinitely adjustable in the X Y Z 3 Axis digital readout from Heidenhain.

Condition: like new (used), Year of construction: 1996, Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Travel : 340x160x340mm Speeds : 40-2000 U/min Taper : SK 40 Djb E Tbegufhfe Egekl Table 600x210mm Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2000U/min Feeds 2-2000 Power supply 50 Hz 3x 380V Motor 1,8KW Weight ca. 700kg Dimension 1000x1600x1000mm

Condition: good (used), Year of construction: 2007, operating hours: 21,546 h, Functionality: fully functional, machine/vehicle number: 15035711814, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, Universal milling machine DMU 70 evolution with NC swivel rotary table, measuring probe, chip conveyor and IKZ Dkeb Esvuyivo Tb Egsl

Year of construction: 2005, Condition: ready for operation (used), A CNC milling machine, which has been converted to a horizontal design, is available. Travel X/Y/Z: 800mm/700mm/600mm, repeat accuracy: mm. Table diameter: 630mm, max. table load: 600kg, tool positions: 60, tool holder: 60, tool diameter: 100mm/160mm, tool length: 350mm, max. tool weight: 10kg, feed rate: 50m/min, rapid traverse: 50m/min. Machine dimensions X/Y/Z: approx. 6600mm/5400mm/2750mm, weight: approx. 10200kg, control: iTNC 530. Documentation available. On-site inspection is possible. Dsb E Tev Ampreb Egskl

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Deb E Tb Eov Ip Izogskl Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm Dkob E Tbjgtypvs Egjl tool taper ISO 40 spindle turning speed range 40 - 2000 U/min table-size 700 x 280 mm surface area 830 x 224 mm total power requirement 2,2 kW dimensions of the machine ca. 1,4 x 2,1 x 2,0 m Control Heidenhain TNC 145

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Brand CORREA Model CF22/25 Heidenhain TNC-420 numerical control (possibility of retrofit tnc 620) Year of manufacture 1999 Fixed bench type TECHNICAL SPECIFICATIONS DIMENSIONS Table dimensions 2,500 x 700 mm Number of slots 5 T-measurement 22 mm DISTANCES X axis 2,500 mm Y axis 800 mm Z axis 800 mm MACHINE FEEDS Range 5-5000 mm/min Rapid feed / X,Y-Z 12,000 mm/min WEIGHTS AND DIMENSIONS Machine weight 10.000 Kg Maximum admissible table weight 3.500 kg Dksbeviwaho E Tb Egjl Machine dimensions 6,400 x 3,345 x 2,800 mm

Condition: ready for operation (used), Year of construction: 1978, Functionality: fully functional, machine/vehicle number: Fabr.Nr.32283, feed length X-axis: 300 mm, feed length Y-axis: 375 mm, feed length Z-axis: 200 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, quill stroke: 50 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, total height: 1,750 mm, total width: 1,538 mm, table height: 870 mm, space requirement height: 1,750 mm, Equipment: documentation/manual, Universal tool milling and drilling machine Maho 300P Speed range 40-2500rpm continuously variable Travel paths: X 300mm Y 375mm Z 200mm Feed rates: 0-500mm/min continuously variable Tool clamping hydraulic, SK 40 holder Accessories: Swiveling rotary table with perforated dividing disks Rigid angle table Universal dividing apparatus Dkeb E Tbjv Egbme Egsl Hilma machine vice

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 15,000 mm, travel distance Y-axis: 3,800 mm, travel distance Z-axis: 1,200 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, CNC SELCA 4045 5-axis continuous head Internal spindle cooling 40-position tool changer Longitudinal travel X: mm 15,000 Transverse travel Y: mm 3,800 Vertical travel Z: mm 1,200 Passage between uprights: mm 3,500 Max. torque on spindle: Nm 1,000 Max. feed force in X, Y, Z axes: N 30,000 Table load: kg/m2 4,000 Total table surface: mm 3,000x16,000 Number of T-slots plane/pitch: -/mm 13/220 Central slot width: mm 22H7 Width of other slots: mm 22H11 Table height from base: mm 700 Passage between fixing plane and transverse plane: mm 1.800 Minimum distance of the horizontal spindle axis from the workpiece table surface……………mm 325 Maximum distance of the horizontal spindle axis from the workpiece table surface……………mm 1.575 Minimum distance of the vertical spindle face from the workpiece table surface……………mm 30 Distance of horizontal spindle face from the inside edge of the table……………mm 105 Distance of vertical spindle axis from the inside edge of the table…………….mm 450 Spindle taper: ISO 50 Tool taper: DIN 69871-A50 Tool clamping force in spindle: N 10,500 Spindle diameter in front bearing: N 85 Spindle orientation around the B-axis: 210° Max. B-axis torque: Nm 1,800 B-axis rotation speed: °min’ 1-5,400 Spindle orientation around the C-axis: 360° Max. C-axis torque: Nm 2,500 C-axis rotation speed: °min’ 1-1,800 Spindle motor: governor Usable power of main drive motor: kW 30 Spindle speed range: min’ 20-4,000 Number of revolutions: continuous Range of feeds: m/min’ 1-5,000 Rapid feed X-axis: m/min’ 15 Rapid feed Y-axis: m/min’ 15 Rapid feed Z-axis: m/min’ 12 Year of construction: 2002 Design and operating data Machine length: mm 20,196 Machine width: mm 8,884 Machine height: mm 5,645 Covered area: m2 105 Total weight of the machine with tool magazine and with standard accessories: kg 94,000 Weight of the electrical cabinet: kg 850 Main voltage: V/Hz 400/50 Power of the machine power supply: kVA 60 Dkob E Tb Ejv Sc Naogsl

Condition: used, clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Bessey, clamping claws, machine table clamps, pivoting -Type: BS-5 -Wingspan: 260 mm -Number: 3x tensioners available Djb E Tb Eou Tyuqjgokl -Price: per piece -Dimensions: 300/80/H370 mm -Weight: 3.0 kg/piece

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Dkob Eev Ip Ale Tb Egsl Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 Dob E Teg E Utxeb Egjkl T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled

Condition: refurbished (used), Year of construction: 2005, BRAND: NICOLAS CORREA MODEL : DIANA 20 DIGITAL CONTROL: Heidenhain TNC 530 YEAR OF MANUFACTURE : 2005 YEAR OF REVISION : 2024 TABLE DIMENSIONS: 2,000 x 900 mm X AXIS: 2,000 mm Y AXIS: 1,000 mm Z AXIS: 1,000 mm HEAD TYPE: U22 (New) SPEED RANGE: 550 - 4000 SPINDLE TYPE : ISO 50 FAST FEEDS: 20,000 mm / min Deb E Tbjun R S Do Egokl APPROX. MACHINE WEIGHT: 14,000 kg MAX. ADMITTED ON TABLE : 3500 kg MACHINE DIMENSIONS : 6400 x 3500 x 2530

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV Dkob E Tb Eed Hl Stegjl travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. Dsbsu Sbbfe E Tb Egekl - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank Dksb E Tbob A H Rbj Egel -Movable: via crank 200 mm -Number: 1 piece available

Condition: used, Year of construction: 2002, x-travel 2600 mm y-travel 1000 mm z-travel 1000 mm table-size 3.600 x 900 mm max. workpiece weight 8.000 kg no. of flutes 6 groove width 22 mm flute distance 125 spindle taper ISO 50 DIN 69871 Dksb E Tb Eogvqqlogol number of spindle speeds 4.000 (2 Steps 0 - 1.000, U/min feed speeds 10 - 5.000 mm/min rapid speed 10.000 / 10.000 / 10.000 mm/min dimensions of the machine ca. 9,82 x 5,1 x 3,16 m weight of the machine ca. 21,5 t Control Engine: Spindle drive motor: 29 kW Feed drive motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer

Condition: excellent (used), Year of construction: 2002, Milling machine Manufacturer : CORREA Model: EURO-2000 Dob Ejut T E Dj Tb Egokl CNC : Heidenhain TNC 530 Year : 2002 TECHNICAL SPECIFICATIONS DIMENSIONS Table size: 2,000 x 1,000 mm No. of slots: 8 T-measurement: 22 mm MOVEMENTS X axis: 2,000 mm Y axis: 1,250 mm Z axis: 650 mm Between columns: 1,250 mm SPINDLE HEAD Spindle type: 12,000 rpm milling spindle (new) Spindle clamping: Hydraulic ISO: HSK-63 Speed range: 12,000 rpm Spindle power: 25 KW FEEDS Rapid feeds X-Y-Z: 20,000 mm/min WEIGHTS AND DIMENSIONS Machine weight: 14,000 kg Maximum table load: 5,000 kg Machine dimensions: 6,500 x 3,600 x 4,000 mm ACCESSORIES Heidenhain HR-410 portable handwheel Ethernet Chip conveyors : 1 ATC : ATC 24 Fairing : Integral

Condition: used, clamping table, clamping angle, T-slot table, rotary table, milling machine table Djb E Tb Esu Tlglsgekl -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg

Condition: refurbished (used), Table dimensions: 2000 x 350 mm Number of slots: 5 x 20 mm Distance between slots: 80 mm Table weight capacity: 2000 mm X axis: 1400 mm Y axis: 600 mm Z axis: 650 mm Rapid feeds X, Y: 2000 mm / min Deb E Toupgpueb Egokl Rapid feeds Z: 1000 mm / min Spindle : Cone: NT40 Number of spindle speeds: 12 Spindle speed: 4000 rpm Spindle motor power: 20 kW Approximate machine weight: 7000 kg Overall dimensions: 4660 x 2525 x 2700 mm

Condition: excellent (used), Strokes X/Y/Z 1000 / 460 / 580 mm Table surface 1410 x 400 mm Spindle taper SA 40 Spindle speed 24 to 1500 rpm Work feeds 10 to 900 mm/min TECHNICAL SPECIFICATIONS Longitudinal travel X (mm) 1000 Cross-travel Y (mm) 460 Vertical travel Z (mm) 580 Mobile console Yes Table surface (mm) 1410 x 400 Slots (width x spacing x no.) (mm) 15 x 80 x 5 Working height (mm) 880 to 1420 Distance spindle nose to table (mm) 0 to 540 Spindle taper SA40 Head type Universal tilting Spindle speed (rpm) 24 to 1500 Number of speeds 16 Spindle motor power(Kw) 7.5 Electrical installation (Volt) 400 V three-phase Work feeds (X/Y) (mm/min) 10 to 900 EQUIPMENT Milling vice Heidenhain 3-axis display Dkeb Eeun Smpe Tb Egol PAROLAI protective housing Overall dimensions (L x W x H) (mm) 2570 x 2000 x 2100