Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management Dkebvowhfi Tsdlcvel - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Year of construction: 1973, Condition: used, Travel 800 x 500 x 450 mm Debvdlob S Ivujcvekl Table load approx. 600 kg Weight approx. 4 t.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Dsbvdsuqytvjlcvjkl Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: used, Year of construction: 1990, x-travel 1100 mm y-travel 600 mm z-travel 600 mm Control Heidenhain 355 weight max. 10 t head swivability ja ° ja table length 1200 mm Dkobvdlcjwf Etyevsl table width 550 mm serial number A12055

Condition: excellent (used), Asquith VNCT MDB 180 Fixed Gantry Travelling Table CNC Mill Serial Number P55009 Year 1989 Heidenhain CNC Control Table 96” x 180” (2440 x 4600mm) Height under Cross rail 1,000mm Ram 180mm dia. Ram Travel 600 or 800mm Dkebowbpztovdlcvel Spindle 50 iso. Spindle 20 – 2250 rpm or 30 – 3000rpm Spindle power 26-37kw

Condition: used, X Axis 30.0 in 762 mm Dkjbsiypzdsvdlcvjl Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Condition: excellent (used), Universal milling machine Maho Debvdevyuaaolcvekl Type: MH 300 Drive: brake motor for milling spindles KW: 1.1 Main gear: sliding gear, geometrically stepped. - 1.25 Number of gears: 18 Table clamping area: 520 x 260 mm x-travel: 300 mm y-travel: 350mm z-travel: 200 mm Spindle mount: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Digital display Feed rates X,Y,Z Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 800 kg Location: from stock 54634 Bitburg - available immediately -

Condition: new, The SBF is a drilling and milling machine in the best way. It is ideal as a drill with a powerful drive and a wide speed range. You can also use this machine to mill steel and non-ferrous metals. This makes the SBF 40 a drill with additional benefits at an unbeatable price. Debvdlouyibcjcvokl

Condition: good (used), Year of construction: 2002, Functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Dkjbvdleuv Hrdjcvjl Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, Year of construction: 2023, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Dkjbvdsqy Hinslcvel Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: excellent (used), Butler Elgamill Model LE Floor Type Milling Machine Dkobvdlswbpycjcvsl Serial Number 28318 Year 1990 Heidenhain CNC Control Double swivel Universal Head Spindle 50 iso Spindle drive 30HP Ram Travel 1050mm Vertical Travel of head 2,800mm Horizontal travel of Column 6,000mm 2 x T Slotted Tables 2000mm x 2000mm San Rocco Independently controlled Rotary Table 1800 x 2400mm with 1000mm of travel, load 20,000kg capacity.

Condition: used, Year of construction: 1992, x-travel 710 mm y-travel 500 mm z-travel 460 mm Control TNC 407 accessories and equipment: div. Zubehör und Werkzeug total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 4*3*2,5 m Free for a short time from current business resolution ready for operation - see YouTube video Djbvdlovfyaiscvokl ?v=0t82T4F6wVA Otherwise untested, wear and tear due to age and use Equipment: Fixed table 1000 x 500 mm, (12-fold tool changer), electronic handwheel, spray protection cabin, weight 3400 kg. Speed range 40-4000 /min.

Condition: new, power capacity 0,75 kW degree 45° Grad turning speeds 10.000 U/min milling height 4,0 mm motor 400 Volt Djbvdoixmlmelcvskl range L-W-H 560 x 300 x 450 mm weight 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool

Condition: new, The versatile multi-purpose milling machine combines all the advantages of the world's best-selling milling machine with additional stability. The top model of the MF series has an SK 40 tool holder and a 30 percent higher unladen weight. The X and Y axis are equipped with infinitely variable feed devices. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. The equipment also includes a four-stage, automatic quill feed, pneumatic tool clamping and a large clamping table for workpieces and clamping devices. Dkjbvdlcep Dty Djvsl

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Dkjbvjh U Nvkedlcvel Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Year of construction: 2023, Longitudinal x 10000 mm Vertical Y 2200 mm transverse Z 1300 mm tool holder ISO 50 Control Heidenhain TNC 640 milling head 2,5° 6000 rev. IKZ changer 60 pockets Dkobvsglpz Rjdlcvol panel field 11000 x 2500 x 300 mm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 355, total length: 7,200 mm, total height: 4,900 mm, net weight: 40,000 kg, total depth: 7,800 mm, Bedfreesmachine met beweegbare tafel 5 assen afmetingen draaitafel: 1800 x 2200 mm spindeldiameter: 130 mm spindelslag: 800 mm met gereedschapswisselaar 60 gereedschappen Longitudinal travel X-axe: 3500 mm Cross travel Y-axe: 1250 mm Travel Z-axe: 2000 mm Dimensions clamping space- table: 1800 x 2200 mm Dkebvewda Sbsdlcvel Power on spindle: 32 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 5 > 1100 rpm

Condition: new, APPLICATION AREAS: -jewelry industry -medical technology -precision mechanics -micromachining -mould and prototype construction -dental technology ADVANTAGES: -5-axis operation as standard -15-fold tool changer -low vibration -high accuracy through precision guides Dsbehqhkiovdlcvskl -large operating panel with 24" touch operation PREFERRED MATERIALS: -Titanium -Steel -CoCr -Aluminum / Light Metals OPTIONS: -Machine base -automatic placement system -various clamping devices -Liquid cooling for milling spindle -Laser or print options -3D measuring probes -Fields of application The iMG 1010 offers a compact solution for machining workpieces up to 100x100x100 mm. The machine enables a wide range of materials such as aluminum, CoCr or titanium to be machined precisely. The arrangement of the axes enables almost all positions on the workpiece to be reached without the need for reloading. The special mounting of the Y-axis is to be emphasized, which guarantees high stability as well as enormous vibration damping due to its installation position. The selection of workpiece clamping devices and holders in combination with the zero-point clamping system makes the machine a versatile machining center. The design allows wet/dry machining without time-consuming changeover. The basic design allows the machine to be extended by an optional handling system, which can enter the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. By means of software interfaces, the system can be integrated into network-controlled automated manufacturing processes. The maintenance-friendly design and the durable direct spindle drives save service costs and time and offer a reliable machining system. During development, care was taken to ensure that all elements are easily accessible and yet protected from external influences to guarantee a long service life. A wide range of optional extensions are available for the system. For example, a practical base frame is available for storing tools, material or the extraction system. The machine can be used flexibly for a wide variety of materials. Metals and plastics can be processed wet and dry without changeover. The zero-point clamping system facilitates the handling of the workpieces. *This version is offered with aluminum base frame!

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm Djbvdlou Sa Uwscvskl z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: new, The versatile universal milling machine complements the proven top model of the VHF series. The combination of horizontal spindle, swiveling vertical milling head and large clamping table, with an increased speed range and the infinitely variable servo feed, extend the wide range of applications of the VHF series. Together with the extensive equipment, this model is also ideally suited for milling in repair workshops as well as training and production departments. Dkjbsn E Ni Hsvdlcvjl

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT Dksbsvrzv Esvdlcvol  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: new, Year of construction: 2023, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 3.600 / 4.000 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Debvdljqy Hkajcvskl Operator-supporting technology packages

Condition: good (used), x-travel 300 mm y-travel 340 mm Dkebvdjucphxslcvol z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Condition: excellent (used), Year of construction: 2017, operating hours: 4,200 h, USED KAFO KMC-4020 VERTICAL MACHINING CENTRE WITH FANUC 31iA CONTROL. AVAILABILE IMMEDIATELY - Ex Site - Subject to Prior Sale. DOUBLE COLUMN, BRIDGE TYPE VERTICAL MACHINING CENTRE WITH LINEAR GUIDEWAYS, AUTOMATIC UNIVERSAL HEAD AND HEAD CHANGING SYSTEM MACHINE CONSTRUCTION & FEATURES Dkobsvg H Dwjvdlcvjl • HEAVY DUTY CAST IRON CONSTRUCTION. • 15M RAPID TRAVERSE ON X-AXIS. • 20M RAPID TRAVERSE ON Y-AXIS. • 15M RAPID TRAVERSE ON Z-AXIS. • ROLLER LINEAR GUIDEWAYS ON X & Y-AXES. • BOX GUIDEWAYS ON X-AXIS. • TABLE SPLASH GUARDING. • KAFO 5° x 5° AUTOMATIC INDEXING UNIVERSAL MILLING HEAD. • LINEAR MEASUREMENT SCALES – X / Y / Z AXES. • 20 BAR THROUGH SPINDLE COOLANT. • APPROX. 4,000 HOURS CUTTING TIME SINCE NEW. TABLE Working Surface 4,000 X 2,600 MM Tee Slot (Size x Number x Pitch) 28 MM X 13 X 200 MM Maximum Table Load 18,000 KGS TRAVERSES Longitudinal Travel ( X-Axis) 4,100 MM Cross Travel (Y-Axis) 4,000 MM Vertical Travel (Z-Axis) 1,100 MM Distance From Spindle Nose To Table 200 ~ 1,300 MM Width Between Columns 3,200 MM SPINDLE Spindle Nose Taper #50 Maximum Spindle Speed 6,000 GEARED STD. RPM Spindle Drive GEARED AUTOMATIC UNIVERSAL MILLING HEAD Indexing Location C AND A AXES WITH CURVIC COUPLING Indexing Positions 5.0 DEG Spindle Power 25.0 KW Transfer Torque (Max.) 750 NM Spindle Nose Taper BT50 Maximum Spindle Speed 3,500 RPM Lubrication OIL MIST FEED Cutting Feedrate (X-Axis) 1 ~ 10,000 MM / MIN Cutting Feedrate (Y-Axis) 1 ~ 10,000 MM / MIN Cutting Feedrate (Z-Axis) 1 ~ 10,000 MM / MIN Rapid Traverse (X-Axis) 15 M / MIN Rapid Traverse (Y-Axis) 20 M / MIN Rapid Traverse (Z-Axis) 15 M / MIN ATC Tool Storage Capacity 40 STATIONS Maximum Tool Weight 20.0 KGS Maximum Tool Size Ø 125 X 400 MM Maximum Tool Size – Adjacent Pockets Empty Ø 215 X 400 MM Tool Shank BT-50 MOTOR Spindle Drive Motor 22.0 / 26.0 KW POSITIONING ACCURACY (WHEN NEW) 3-Axis Laser Positioning Accuracy / Full Travel – Without Linear Scale (JIS B6330) +/- 0.015 MM 3-Axis Repetitive Positioning Accuracy – Without Linear Scale (JIS B6330) +/- 0.003 MM POWER SUPPLY Electric Power Consumption TBA KVA Air Pressure 6.5 KG / CM² Voltage 415V / 50HZ / 3 PH MACHINE Floor Space 11,000 X 6,680 MM Height 5,050 MM Machine Weight 60,500 KGS

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Debvouv Hn Ssdlcvekl Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS