Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Work table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel distance X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 96 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Positioning accuracy Positioning accuracy X-,Y-axis to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 2x 24-fold Design as disk magazine - Tool positions 16 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter Tool diameter mm 76 - Max. Tool length mm 300 - Max. Tool weight kg 8 Machine control Heidenhain TNC 426 Splash guard cladding Covering of the entire work area, designed as partial area protection in accordance with the valid guidelines of the German accident prevention regulations (UVV) and the European standard EN 12417, with manually operated work area door including electrical protection and interlock. Machine door with polycarbonate glazing. 30 bar high-pressure coolant unit (IKZ) for the use of tools with internal coolant supply, Duolitcottg Egebaot switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar complete with separate paper band filter. Internal cooling is also possible with air Clean tank capacity l 500 Degree of filtration my 30 Filter capacity l/min. 120 Hinged belt chip conveyor instead of the chip collection tray with integrated coolant tank, ejecting to the right Discharge width approx. mm 300 Discharge height approx. mm 1050 incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump capacity bar 2.0 HR 410 HEIDENHAIN hand-held control unit External hand-held control unit with built-in electronic handwheel, connected to the machine via cable, for manual movement of the axes, with emergency stop button Grease - central lubrication documentation Operating and programming instructions Hydraulic and pneumatic diagram Circuit diagram Test log

Year of construction: 1996, Condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Dolitcbjq Awg Esasut

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 450 mm turning speeds 31,5 - 1600 U/min tool taper SK 40 quill stroke vertical 80 mm diameter of quill 80 mm table: 1000 x 850 mm total power requirement 4,0 kW weight of the machine ca. 2,6 t dimensions 2,1 x 1,7 x 1,7 m Universal tool milling machines - Digital display - Angle table - Coolant system - Machine feet Duslitcbjvlakueaot

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, feed X/Y/Z: 3m/min, table dimensions X/Y: 900mm/530mm, tool holder: ISO40, speed: 4000rpm, machine dimensions X/Y/Z: approx. 2600mm/1800mm/2200mm, weight: approx. 2600kg, control: Heidenhain TNC 355, operating hours: 57765h. Including 3D probe, 20x holders, spray protection cabin and coolant pump. Documentation available. On-site inspection is possible. Dujlitovx Tw Iocbaet

Condition: good (used), Year of construction: 1997, Functionality: fully functional, -Type of machine: bed milling machine(universal). Delitcou Szziebaout -X-axis displacement: 2,000 mm -Y-axis displacement: 800 mm -Z-axis displacement: 800mm Table -Dimensions of table: 2,200 x 600 mm -Maximum table load: 2,000 kg

Condition: used, Travel path of the axles: Duolitcsq Awhfobaet X: 300mm Y: 350mm Z: 200mm Weight: approx. 800 kg

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 600mm/450mm/500mm, spindle mount: ISO40, spindle speed: 3150rpm, feed: 3m/min, rapid traverse: 4m/min, connected load: 21kVA, weight: approx. 3300kg, operating hours: 29189h. Documentation available. On-site inspection is possible. Dolitcjvg Hlnebajut

Year of construction: 2013, Condition: ready for operation (used), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27000rpm, control: Siemens Sinumerik 840 DSL, weight: approx. 7000kg. An on-site inspection is possible. Duelijugmxietcbaet

Year of construction: 2019, Condition: ready for operation (used), Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible. Dujliouk I Eyotcbast

Year of construction: 1997, Condition: ready for operation (used), Tool length: 250mm, max. tool weight: 6kg, control: Heidenhain CNC 234, connected load: 40kVA, machine dimensions (LxWxH): 4700mm/4100mm/2300mm, weight: approx. 2.8t, operating hours: 43,408h. The guide rail of the front door is broken. Documentation available. An on-site inspection is possible. Dujlieulzlcjtcbajt

Year of construction: 2010, Condition: ready for operation (used), X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control panel, on-site inspection is possible. Duolisriwd Netcbaet

Condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible. Dujlsvriptoitcbaet

Year of construction: 2006, Condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Dujlitcbjvi N D Ssaot

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Duelietuwk Uotcbast

Year of construction: 1997, Condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Duelotx Dn Uoitcbajt

Year of construction: 1991, Condition: ready for operation (used), X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, tool holder: ISO 50, speed: 20-4000/min, feed rate: 1-4000mm/min, max. rapid traverse: 10m/min, number of tool positions: 36, max. tool diameter: 160/210mm, max. tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions: 5080mm/36xWxH Tool length: 315/400mm, max. tool weight: 15kg, control: Heidenhain iTNC 530, connected load: 40kVA, machine dimensions (LxWxH): 5080mm/3650mm/2005mm, weight: approx. 16t, documentation available, complete retrofit 2015. Doliteulzk Secbaeut

Year of construction: 1980, Condition: ready for operation (used), Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. Dueler Hciyoitcbaot

Condition: ready for operation (used), Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible. Doletthtfsitcbaout

Year of construction: 2001, Condition: ready for operation (used), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible. Dujlitceuqacwebajt

Year of construction: 1997, Condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Dusliolc N Ststcbaet

Year of construction: 1990, Condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible. Duslitcbst Daqnoajt

Year of construction: 2002, Condition: ready for operation (used), Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y/Z: 28020mm/655mm/640mm, max. table load: 800kg, speed: 12000rpm, spindle power: 18.5kW, tool holder: SK40, tool positions: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 2850mm/3350mm/2800mm, weight: approx. 6100kg, control: Mazatrol 640M. Documentation available. On-site inspection is possible. Dujlitcovu Dd Debajt

Year of construction: 1984, Condition: ready for operation (used), Travel X/Y/Z: 1270mm/660mm/530mm, feed X/Y/Z: 1500mm/1500mm/54mm/min, rapid traverse X/Y/Z: 2500mm/2500mm/750mm, spindle power: 9.2kW, speed: 1420rpm, spindle taper: NST 50, table dimensions X/Y: 1700mm/500mm. Documentation available. On-site inspection is possible. Dusliteuyk Rxjcbaot

Year of construction: 1995, Condition: ready for operation (used), A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible. Doliju T Rgwetcbaeut

Year of construction: 2007, Condition: ready for operation (used), Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible. Dujlitcju T Rg Dobajt