Condition: defective spare-parts repository (used), Year of construction: 1986, x-travel 410 mm y-travel 310 mm z-travel 400 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2*2*2 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Djln T H Usunulbe Esut Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis active digital display Heidenhain in light gray Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 2203-7347 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power: 3.7 / 4.4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable Dueln T H Usu U A U Ae Eet >> Hydraulic tightening system >> Weight approx. 1600 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant device >> Chip tray >> Electrical central lubrication >> Operating instructions, spare parts diagrams, To the machine : We are offering a Deckel FP4M Aktiv universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. The machine has hydraulic clamping. The FP4M was only used occasionally in a state-owned company for training purposes. On this newer FP4 model, the feed rate is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine approaches automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to view and try out this machine under power on site.

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min Duslsv R Dxmen T H U Eet MACHINE DETAILS Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Duslsdtm Ahon T H U Eot Power 1,4 kW Tool holder SK30 DIN2080

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 2023AB2200134, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, table length: 6,000 mm, table width: 800 mm, power: 11 kW (14.96 HP), PFEIFER technology skyCNC Milling Machine Center 6008 - 5 ATC - Available immediately, ready for use by the user, sold due to conversion CNC milling machine - high precision and powerful 6000 mm x 800 mm x 300 mm (clearance height under portal 300 mm + max. tool length 300 mm) High precision - milling and drilling at extremely high speed and quality. Dueln Tjrh Ix Ho H U Eot Incl. automatic 5-fold optional 10-fold tool changing system - pneumatic tool change, BT40 tool holder Incl. device for dust extraction on the spindle (integrated in the spindle housing) and connection piece for connection to the local extraction system including HPM minimum quantity lubrication/spray cooling, for cooling workpieces and tools; automatic Can be controlled by a solenoid valve via M code Incl. 5 x tool holder BT40 and 5 x collet chuck including central lubrication access including automatic tool length measurement Incl. mobile MPG control unit for quick and easy control of the machine, workpiece zero points freely selectable, Ethernet connection for data transfer via network, USB connection File formats: G-Code, DIN ISO data Incl. industrial computer system with 17" TFT touchscreen and PC keyboard and mouse HF spindle: 15 HP 11kW, air cooled Spindle speed: 3,000 - 15,000 rpm ES951 A 1112 S Power connection: 3 phases AC 400V / 50 Hz Power consumption: max. 14 kW need 7 bar / compressed air connection including air filter Dimensions (LxWxH): 6850 x 1440 x 2163 mm Weight: approx. 3250 kg

Condition: used, Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 2821-0422, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 2,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 4,000 rpm, quill stroke: 300 mm, quill diameter: 100 mm, tool mount: 40 mm, spindle mount: MK 4, position of the milling head: Mitte, rotational speed (max.): 4,000 rpm, input voltage: 380 V, input current: 21 A, input frequency: 60 Hz, Equipment: documentation/manual, The machine is in very good technical condition. It also comes with SK 40 tool holders and a vise. A cooling system and splash guard (see photo) are included. The machine is sold as seen, without warranty. Djln T H Uov I Ra So Eeut Viewing possible by appointment, available upon request.

Condition: used, x-travel - mm y-travel - mm z-travel - mm total power requirement - kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,5*1,5*2 m Dslounug Eon T H U Eeut No. 2510 Universal milling machine Bridgeport ( type/design ) Working area: table 1300 x 305 Angle milling head with additional angle milling attachment and separate drive motor. Horizontal spindle MK-4, speed range 26-630 min-1, Angular milling head speed range 225 - 3385 min-1 Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min. Space requirement approx. 1.5 x 1.5 m, Weight approx. 1300 kg.

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Dsln Tsu Um Ero H U Ejut Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Doln T Hsv Ryams U Esut Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm Doln Tjibarqo H U Esut 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: like new (used), Year of construction: 2021, Optimum OPTImill MZ 2S tool milling machine Ideal for training workshops!!! Available now With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable via the control panel. Versatile range of applications Excellent damping properties and stability of the machine frame All guides are hardened and precision-ground and can be adjusted using wedge strips Automatic feed in X-, Y- and Z-axis, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, generously dimensioned and precisely surface-machined with 5 T-slots Coolant device Large handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm Width/depth (product) approx. 1168mm Height (product) approx. 1900mm Weight (net) approx. 1400kg Drilling/milling head Milling head swivel range ± 90 Drilling/milling capacity Cutter head size max. 100mm Dujln T H Uouqix Uj Eet Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Drive motor power 2.2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm Distance vertical spindle - horizontal milling table min. 75mm Distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots quantity 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table max. load 285kg Vertical milling table Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots quantity 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel distance Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Travel path X-axis automatic approx. 310mm Travel path Y-axis automatic approx. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat depth 100mm Vertical spindle Spindle holder ISO 40 DIN 2080 Vertical spindle Speed range 50 - 1890min¯¹ Vertical spindle Number of speed ranges 12 steps Vertical spindle Tightening bar M 16 Vertical spindle Quill stroke 120mm Vertical spindle Load max. 1100Nm Feed speed Bjpvld3Hbf Feed speed X-axis 10 - 600mm/min Feed speed Y-axis 10 - 600mm/min Feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) Rapid traverse X-axis power drive motor 0.375kW Rapid traverse Y-axis power drive motor 0.375kW Rapid traverse Z-axis power drive motor 0.375kW

Condition: good (used), Year of construction: 2001, Reckermann 1300 estate, Year of manufacture 2001, Control Heidenhain TNC 124, Travel X/Y/Z 1200/370/450 mm, table size 1570 x 400 mm, max. table load 700 kg, Spindle speed vertical / horizontal 2,100/1,400 rpm, ISO 40 mounting, quill stroke 120 mm, universal milling head, rapid traverse X/Y/Z 6 m/min, Djln Tju Tqifo H U Esut Weight of the machine 4,500 KG,

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 400 mm z-travel 500 mm Control Sinumerik 880 total power requirement 9 kW weight of the machine ca. 3 t dimensions of the machine ca. 3 x 3 x 2,7 m Fixed table Full protection cabin Electronic handwheel Documentation Spindle holder SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m/min Duelnoug I Ras T H U Est

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan Duelou T D Nron T H U Eot To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, MTE Compact Plus, Year of manufacture 2000, Control Heidenhain TNC 426, travel X/Y/Z 2000/800/800 mm, 20-position tool changer, Doleu Afwrsn T H U Esut SK 50 holder, Table clamping surface 2,200 x 750 mm, spindle speed up to 2,250, max. table load 4,000 kg, feeds up to 4 m/min, Machine weight approx. 10,000 kg, connected load 30 KW,

Condition: used, Year of construction: 1981, x-travel 400 mm y-travel 200 mm z-travel 400 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2 x 2 x 2 m No. 5032 Universal tool milling machine DECKEL FP 2 active Working area: 400 x 220 x 400 Drive: 2 kW Control: 3-axis active digital display Heidenhain Fixed table 700 x 330 mm Folding splash guard cover with chip tray Machine feet documentation Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Duoln T H Ujtqp Tlo Eot Space requirement approx. 2.5 x 1.8 x 1.8 m

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis active digital display Heidenhain Super condition !!! Technical data: Duoln T Hsu Tuk Hj U Ejt >> Year of construction 1992 Machine-No.2203-8449 >> Rigid angle table >> Speed: 50 - 2500 rpm >> Feed: 8 - 630 mm/min >> Drive power : 3,7 / 4,4 KW >> Spindle brake >> rapid traverse 1300 mm/min >> Traverse paths X/Y/Z: 500/400/400 mm >> Vertical milling head can be moved on headstock >> Vertical quill and horizontal quill - SK40 >> Vertical quill 90mm extendable >> Hydraulic tightening system >> Weight approx. 1600 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant device >> Chip tray >> Electric central lubrication >> Operating instructions, spare parts diagrams, To the machine : We are offering a Deckel FP4M Aktiv universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. The machine has hydraulic clamping. The FP4M was only used occasionally in a state-owned company for training purposes. On this newer FP4 model, the feed rate is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine approaches automatically. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Year of construction: 2008, feed length X-axis: 50,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, Unisign Univers 6 - 5000, Year of manufacture 2008, Siemens 840 D control system, Travel X/Y/Z 5000/800/600 mm, tool changer 52 times, SK 50 holder, Dusln Tjup D Axs H U Ejt drive power 26 KW, Long machining or pendulum machining, 5-sided machining with interchangeable angle head,

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 400 mm z-travel 400 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*2*2 m No. 5124 Universal tool milling machine DECKEL FP 4M Working area: 500 x 400 x 400 Dolotqp Egsn T H U Eeut Drive: 4 kW Control: 3-axis digital display Heidenhain Spindle holder SK 40 / M16 Speed range 50-2500 min-1 Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray documentation Space requirement approx. 2 x 2 x 2 m Weight approx. 1500 kg

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: >> Year of construction 1986 Machine no. 2102-2941 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan Dusln Tju S Ev Do H U Eet To the machine : B8Qguzgavc Universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Year of construction: 1977, x-travel 500 mm y-travel 400 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5*2,5*2 m Dsln Tetqp U Rj H U Eeut No. 4030 Universal milling machine - not functional - to be used as spare part - Weight aprrox. 1800 kg Rigid table 800 x 400 mm3 separate feed motorsVertical milling head with quill feedSpeed range 40 - 2000 min-1 Working area: 500 x 400 x 400

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3 - axis - active digital display TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6195 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: Dujlnju Sr Rkj T H U Eot >> 3-axis digital readout Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Year of construction: 1975, x-travel 900 mm y-travel 340 mm z-travel 380 mm total power requirement 3 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2*2*2 m Horizontal console milling machine Spindle SK 40 Speed range 30-1500 min-1 Duoln Tjtqp Sho H U Est Feed rates 4 / 11 to 230 / 570 mm/min Weight approx. 1700 kg Working area: 900 x 340 x 380 Control: Table size 1200 x 250

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock Dujlneu R D I Sj T H U Eot >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, weight 6 kg Deln T H Ujtr U Tko Eout Shipping weight 6 kg amount 6 Stück