Used multi spindle machines for sale (203)

Condition: excellent (used), - Chip conveyor with extractable tray Cjdpfxjq Tq Imo Afljrk - 4 cross slides pos 1,2,5,6 - AC motors for spindle speeds and feeds - New Siemens electrical cabinet - Siemens PLC 7.300 control panel - Machine with hydraulic pick-up and hydraulic cross slide - Tool holders and equipment on request Jfghuc9 Cycle time studies and part set-up on request.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: B2235, controller manufacturer: Siemens, controller model: Sinumerik, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Cedpfx Afjwx Nqijlork TECHNICAL DETAILS Supply voltage: 400 V~ Power consumption: 16.3 kVA Current consumption: 25 A Control voltage: 24 V= EQUIPMENT - Chip conveyor included

Condition: good (used), Tornos SAS 16 6.6 Multi-Spindle Automatic Lathe Codewh Snvepfx Aflsrk Condition: Very Good Machine Name: Automatic Lathe with Sliding Headstock Manufacturer: Tornos Model: SAS 16 6.6 Condition: Good (Used) 2 Tornos SAS 16 6.6 Automatic Lathes 1 of which has an NC slide

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm Codpfemduh Ejx Aflerk rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Paint finish light blue & light gray Crsdpfou Edp Sex Aflek

Condition: new, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Storage traces Credpfswcq Tyjx Afljk

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Cedpfxjmhfxmo Afljrk Chip conveyor : Removable tank with chip conveyor Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for rear machining Other accessories and special accessories on request

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: A2222, controller manufacturer: Siemens, controller model: Sinumerik, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V~ Power consumption: 16.3 kVA Current consumption: 25 A Cjdpfxswx Nl Tj Afljrk Control voltage: 24 V= Dimensions: 2.6 x 2.4 x 2.5 m EQUIPMENT - Chip conveyor

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. Credjr Nc Ufepfx Afljk The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: excellent (used), Year of construction: 1990, 1 x multi-spindle automatic lathe Index MS 25 Cjdpfsu Hgdujx Aflsrk Year of manufacture: 1990 with loading magazine Iemca PRA 40/33 P Lots of accessories. The machine can be viewed under power.

Condition: ready for operation (used), Year of construction: 1994, We offer a Kummer K90D, which is ideal for production operations. The machine is equipped with a loading and unloading gantry and a corresponding sorting tray. Codpfxev Rpw Is Aflsrk

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, number of spindles: 2, controller manufacturer: Siemens, controller model: 840D Solution-Line, Comprehensively equipped turning and milling center with main and counter spindles! TECHNICAL DETAILS Spindles Main spindle: D65 Counter spindle: D65 Tool Carriers Tool Carrier 1: Motorized milling spindle, HSK A40 tooling system Cedpfewylz Tox Aflerk 2 × 3 fixed tool stations: VDI25 on TC1 XYB Tool Carrier 2: Motorized milling spindle, HSK A40 tooling system 2 × 3 fixed tool stations: VDI25 on TC2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and electrical cabinet cooling Coolant through main spindle: available Coolant through counter spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system High-pressure pump emulsion: 16 l/min High-pressure pump oil: 33 l/min, max. 80 bar Fine filtration of coolant: Compact belt filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-axis machine configuration: available Control: Siemens 840D Solution-Line EQUIPMENT Tool changer Electronic shaft for spindles and drive systems Main spindle expansion stages Stop device including coolant supply through main spindle with solenoid valve Counter spindle expansion stages Stop device including coolant supply through counter spindle with solenoid valve Accuracy package Portal loading system Finished part conveyor Hinged belt conveyor, 1,250 mm with lift pump Chip discharge on the right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Expansion direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeding magazine

Condition: new, Number of spindle: 6 Max bar diameter: 20 mm Max supply length: 100 mm Crjdpfxskvl Ero Afljk Spindle speed: max 6.000 rpm Multispindle cam machine for small bar capacity with high rigidity, high accuracy and very fast. This rigid and highly accurate machine is very fast. This machine is used for medium and mass component productions from bar material or rough part not finish with special bar loading. Machine is equiped with thruth coupling, 6 longitudinal slides, 6 cross slides wtih station 1 ; 2 ; 4 ; 5 with long turning. AC speed and feed adjustable, machines can be equiped with automatic bar loader.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Codpfx Aehv H Hyeflsrk Please give us your quote for the machine ----- Without packaging; Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. Codjt Du Tdopfx Afljrk COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Year of construction: 2005, condition: excellent (used), Multispindle lathe Schütte SF26S DNT Csdog Ezv Hepfx Aflork

Condition: new, Year of construction: 2023, Number of spindle: 6 Crjdpekvnvvefx Aflsk Max bar diameter: 32/42 mm Max. feeding length: 150 mm Spindle speed: max 5.000 rpm This machine combines the high productivity and robustness of the cam-operated multi-spindle with the advantages of numerical control, which has been made easy for the operators to use. The machine is equipped with a Siemens 840D Solution line dual NC for the control of 24 basic axes and 20 additional axes as an option. The 6 independent spindles with AC motors have a power of 7 kW allowing the machining of difficult materials.

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Cedsg S Tx Ijpfx Aflerk

Condition: excellent (used), Year of construction: 2016, 3x MACHINES : GM20CNC YEAR : 2016 DESCRIPTION: Machine with original NC Gildemeister SIEMENS SINUMERIK CNC 840D - CN slide station 4 and 5 - CN hydraulic pick-up, advance, rotation, stop Crsdsvcmfaspfx Aflsk - Double slide pos 6, - Mechanical cutting slide Fxtillqon - CN rework slide + 2 indexing tools - Micrometric slide pos3 - Central block control - 25 mm passage KNOLL HP + FILTRATION + COOLING pump type: FKA/2550 Dnj0ed KNOLL pallet chip conveyor Loader : - IEMCA PRA 52/38P

Condition: refurbished (used), Machine rebuilt with : - AC spindles feed and speed motor Cjdpsir Icwjfx Aflerk - PLC Siemens Simatic HMI - New siemens electrical cabinet - Bar holder and its support - 6 advance tubes - 6 clamping tubes - Optional equipment - C standards machine

Condition: refurbished (used), Série n° 30 389 Machine reconstruite avec : - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI Cedpsir Imcofx Afljrk - Armoire électrique neuve siemens - Porte barre et son support - 6 tubes d'avance - 6 tubes de serrage - Appareillages en option - Machine au normes C

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher - Swarf conveyor Crjdsix I Dgjpfx Aflok - Part belt conveyor

Condition: refurbished (used), MORI-SAY 6/32 check over in standart configuration complete with : - 4 compound slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for conditions feed speed ranges Chips conveyor : Removable tank with swarf conveyor Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for back machining Crjdpfoun Sfxox Aflek Other attachments and special attachments on request

Condition: new, MANURHIN K'MX 520 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electrospindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Five CNC linear axes (X1, Y1, Z1, X2, Z2), two rotary axes (C1, C2). Main features : - Max. bar material diameter 20 mm - 12,000 rpm on both spindles Crodpfx Aouqirbjflok - 8,400 rpm driven tools - Main spindle power 3.7/5.5 kW - Headstock travel 210 mm - Number of tools in the cut at the same time: 2

Condition: refurbished (used), Used INDEX MS 32 C tower, overhauled in 2023 Equipment: -SIR MS32P with shelves 3300 mm long, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable inputs / outputs -4 tool breakage controls Crjdpfeuqi D Rex Aflek -1 NCU1 and 3 NCU2 rotary tool drives -1 WTO stroke doubler, 3 positions, motorised on station 1 -2 drilling units with 6044 motor sold with the machine. -Transmit Equipment listed below with : CNC axis: 1.1 XZ 1.2 Z 2.1 Z 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ