Used other woodworking machinery for sale (344)

Year of construction: 2018, condition: new, Exhibition machine Year of construction: 2018 with full warranty Equipment and technical data: Blodpfsw I Uizex Ad Asr Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Availability: Short term Location: Hochheim

Year of construction: 2009, condition: ready for operation (used), Additional Equipment Second-hand shrink-foil packaging line Through-feed fully automatic shrink foil packing line: loading belt /wrapping station for 3 foil rollers /shrinking tunnel /outfeeding conveyor This ERREGI LINE ERREGI was manufactured in 2009. It features a fully automatic shrink-foil packaging line, including a loading belt, wrapping station for three foil rollers, shrinking tunnel, and an outfeeding conveyor. Consider the opportunity to buy this ERREGI LINE ERREGI woodworking machine. Contact us for more information. Blsdpfx Adjwqtbio Asr Application Types Other Woodworking Machinery

Condition: new, The lifting table for larger xibility as it should be, your desired oneCountertop on the one you wantWorking lift table can be with the one you wantBe equipped and through the plateFoot pedal can be adjusted to your desired height.4 sturdy Polyamit castors, two of them withParking brake, ensure ideal handling.A safeguard against slipping the tablegives you the necessary sense of hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 1200 x 740 mmTotal height: 1010 mmWeight: 150 kg Bljdevxa Nqspfx Ad Ajr

Year of construction: 1995, condition: ready for operation (used), Trolley length 6m 4 hydraulic claws GP 400 bi pressure independent output of the hydraulic claws automatic vertical blocking by pneumatic locking of the lower claw holder complete hydraulic unit on board the truck with distribution and connections centralized lubrication by pneumatic pump with adjustable sequential timer encoder on carriage driven by rack and pinion 4 slab layers 2 log turning machines with chains and cleats motorization 2 directions pneumatic lifting 2 speed Mudata division driving the consoles by gear motor ratio 1 to 4 carriage opening 1250 mm Blodpfx Adohc Urbs Aer capacity under claws 930 mm electrical connection between control station and carriage by armoured cable and by trolley

Condition: used, Spreader, door spreader, door assembly -Number: 8x per case -Number: 2x spreading device available in the case -Price: per piece -Weight: 15 kg/piece Bjdpfx Aob A N N Ued Aelr

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Bodst H Tvvjpfx Ad Aslr Lifting capacity: 4500 Kg

Condition: excellent (used), ZIM Hülsta carcase erector The carcase erector is used to erect and transport assembled carcases. Carcase erectors are mostly used for carcase presses with a throughfeed system. It facilitates handling when erecting large workpieces. Transport and assembly device within a carcase assembly line. Behind a throughfeed carcase press, the pressed carcases are placed on the back using this device. Assembly work can thus be carried out on the underside. Make: ZIM Hülsta-Werke Type: Carcase erector Dimensions: Bsdpfx Ajvdb Ixod Aslr Further items - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2008, condition: ready for operation (used), Additional Equipment User manual, CE certificate, electric diagram Bjdpfewr N Inex Ad Aolr This REINBOLD RMZ 500 was manufactured in 2008. A robust wood shredder with a productivity of up to 850 kg/hour, it features two 11 kW motors and a large upper opening of 1220×1020 mm. Ideal for heavy-duty shredding tasks, it also includes a user manual, CE certificate, and electric diagram. Weight is 1500 kg. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: new, You need a large mobile workbenchyou to the appropriate working heightwant to adjust? Then ours is greatLifting table Zeus the right ply populate the table with theYou desired worktop, whetherPerforated plate for clamping a variety ofWorker or a solid beechMultiplex plate. The sideways foot pedalgives you the opportunity to set the table fastto adjust to your desired hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 1900 x 740 mmTotal height: 1010 mmWeight: 215 kg Bledpfxsvxa Nwo Ad Asr

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual Bedsu R Szaspfx Ad Ajlr manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: used, Tool case -Manufacturer: Projahn, Proficraft tool case carpenter 96-pcs -Extensive range: see photos -Dimensions: 460/360/H150 mm -Weight: 8.7 kg Bledpfx Ader Ngqcj Asr

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Bodpjiiipusfx Ad Ajlr Stock dimension width: 15000 mm

Condition: good (used), Body press Frame press Carcass max. 3000 x 2000 mm Safety fence system Sick C2000 safety light curtain Beijer Electronics E300 Operator Interface control panel Workpiece discharge Roller toothed belt conveyor Control cabinet Mitsubishi Q2ASCPU programmable logic controller Mitsubishi A1SX81 Safety enclosure Blodpfx Aevdchgjd Aer The C 2000 safety light curtain serves as manual protection for safeguarding hazardous points on machines and systems. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1999, table length: 7,900 mm, rotational speed (min.): 18,000 rpm, Dimensions 9400x3300x2300 mm Weight approx. 12,000 kg Cone HSK63 Blodpeua Ap Refx Ad Aor

Condition: new, A mobile workstation with fast,individual height adjustment. About onePedal is operated the hydraulic unit,this is a stepless adaptation to thedesired working height the base frame can be differentWorktops are placed. Theseare fixed with 4 socket lift table has a steel worktop and willdelivered with 4 swivel castors, 2 of them are withParking hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 970 x 590 mmTotal height: 1010 mmWeight: 135 kgRahmen: 970 x 590 mmGes. height: 1010 mmweight: 85 kg Bledpfjvwf Rqox Ad Asr

Condition: good (used), 4-Side Planer BONFANTI MB 4023x4 Serial No. 04-226 CE Standards Machine tables are chromed Max./Min. working width 230/20mm Max./Min. working height 160/8mm Bljdpfx Aow S Ecaed Asr Table length 2000mm Motor power 1 10HP Motor power 2 10HP Motor power 3 10HP Motor power 4 15HP Feed drive power 4HP Height adjustment motor 2.5HP Spindle diameter 40mm Feed speed 6-24m/min Spindle speed 6000 RPM Machine dimensions 3720x1750x1700mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 057, New price ca 100 000.- EUR The Dynagrade equipment is a product for on-line strength grading of structural timber (lumber), grades from C16 until C40 (most usual is C24) and TR26 for UK market . It is especially suitable for installation in sawmill sorting lines or planing mills or comparable plants where sawn (or planed) timber is transported by means of an existing cross-conveyor system. Blsdpfx Adeu Dnf Ij Aor The grading is done with resonant frequency ("knocking" with hammer and measuring the sound frequency with microphones). Very high productivity, can handle up to 100pc/minute (400m/min if avg. length is 4,0m). Main prerequisites: Limber/timber size and length 1): Thickness 19-110 mm, Width 60-300 mm, Length 1200-7200 mm Sawn or planed surface Dried lumber/timber, cut to angle Required space: less than 1 meter (3 ft) of a transfer line with lugged chains (standard)

Year of construction: 2018, condition: ready for operation (used), This LINCK VZM & CSMA was manufactured in 2018. It includes a CSMA pull-out device and a VZM centering device, both designed for high-performance in automated production lines. The CSMA offers flexible material guidance with a feed speed of 85 m/min, while the VZM provides precise centering at 84 m/min. Both units feature robust designs for demanding conditions and minimal use, ensuring excellent condition. Contact us for more information about this machine. Bljdpfx Ajwzc Rued Aor Application Types Other Woodworking Machinery

Condition: good (used), Body lifting and alignment device Belt conveyor table with lifting and alignment device Fezer vacuum lifter Bledjvdcmvopfx Ad Asr Control system: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2008, condition: used, Used machine Year of manufacture: 2008 Performance: 29 pallets/hour (at a package height of 1200 mm incl. pallet) Weight: 690 kg Turntable diameter: Load capacity: 1200 kg Drive: Electric motor 550 W / 50 Hz 400 V Rotation speed: 10 rpm + 20% Rotation direction: right Film carriage drive: 370 W Top press carriage drive: 370 W Max. pallet dimensions: 1200 x 800 mm (base area) Film roll weight: approx. 17 kg Footprint: approx. 3600 x 1800 x 2600 mm Bledpfswt E Uasx Ad Asr Availability: short notice Storage location: Hesse

Condition: ready for operation (used), Various wood milling tools are available for a Homag DEP. Spindle diameter: 35mm/50mm, tools: cutter set for longitudinal machining/replacement knives/milling tools. Documentation available. On-site inspection is possible. Bodpeufqfqefx Ad Aolr

Condition: excellent (used), Miter punch Blodpfxew Eua No Ad Ajr

Condition: used, Laser Stereo Camera Factory refurbished with warranty The Leica BLK3D is a photo-based measurement solution. Each photo captured is a complete measurement report containing height, width, and depth measurements. Measurements can be created at any time, immediately on-site using the handheld BLK3D imager or at any time afterward using the BLK3D desktop software. The BLK3D device combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection capabilities to perform in-image measurements with professional accuracy. Each captured image is a complete and precise 3D measurement report. Stereo Camera: Field of View 80° Bedpev Ntbbefx Ad Aolr Focal Length 4 mm Aperture F 3.0 2x Synchronous LED Flash Intuitive Android Operating System 65 GB Storage; Space for thousands of digital images Fast data transfer via USB-C and Wi-Fi Rechargeable battery lasts a full day 180 x 77 x 27 mm 480 g Laser accuracy Accuracy under favorable conditions +/- 1 mm Range under favorable conditions 250 m Availability: Short-term Storage location: Hochheim With tripod adapter With device bag With DST 360 set including DST 360 adapter, TRI120 tripod, shoulder strap, and carrying case

Condition: ready for operation (used), The machine has received a new rotor, with spare parts and documentation, without electrics and controls, an on-site inspection is possible. Bjdpferuq Dfjx Ad Aelr

Year of construction: 1985, condition: ready for operation (used), Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible. Bodpjwty Emsfx Ad Aolr