Used pillar drills with 30-39mm drilling capacity for sale (185)

Condition: new, bore capacity in steel (diameter) 40 mm bore stroke 190 mm turning speeds 50-1800 U/min Short spindle MK 4 Table dimensions 500x400 mm total power requirement 2,2 kW weight of the machine ca. 330 kg dimensions of the machine ca. 670 x 500 x 2120 mm Crodpfxeyv Nr Uj Aphed

Condition: new, 32 bore stroke 125 mm Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 105-2.650 UpM total power requirement 0,75 kW Overall size 750x450x1745 mm weight of the machine ca. 192 kg Standard equipment: - Number of speed ranges 9x2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug therefore immediately ready for use - Drilling table adjustable via gear rack - Depth stop with scale Crodpsyv Nqwefx Aphod - Emergency stop - According to current CE conformity

Condition: new, 40 mm Cjdpfxeyvvp Ts Aphsrd M 24 M 30 spindle turning speed - stepless 160-2.250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm weight 270 kg

Condition: new, bore capacity in steel St 60 25 mm Drilling capacity in St 60 30 mm threading in St 60 M 16 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514x360 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 132/724 mm feed von Hand 0 stufenlos Spindle Speed 225-4300 U/min. engine 1,0/1,6 kW voltage 400 V Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table Cjdpeyvvpgefx Aphord - Transfer function of the spindle speed as set value

Condition: ready for operation (used), Column Drilling Machine / ALZMETALL AB 3 ES from vocational school Crsdpfoyzakrsx Aphjd - Well-maintained original condition - Drilling capacity / steel max. 35 mm - Throat depth 280 mm - Table size 600x470 mm - Drilling stroke 180 mm - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 480 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From insolvency: Gillardon GB 40 VE Year of manufacture: 2012 No. 4519-130-3913 electromagnetic feed 0.1/0.16/0.25 on the cross lever via push button Csdpfx Aotw Rk Tephsrd Infinitely variable spindle speeds from 60-1600 rpm 2-speed motor work light emergency stop button 200mm quill travel 350mm throat depth table size 630x535mm – clamping surface 400x500mm MK 4 taper – with Röhm keyless chuck 3-16mm machine height 2060mm – weight approx. 480kg The machine runs very smoothly and precisely Table and columns with visible signs of use Digital speed display non-functional + vice Cekaba-Bon 230mm

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds Crsdevu Dv Hspfx Aphjd - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: new, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Milling cutter arbor max.: 80 mm Overhang: 280 mm Spindle speed: (12) 75 – 3200 rpm Spindle taper: MK 4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 730 x 210 mm T-slot size: 14 mm Distance spindle / table max.: 640 mm Distance spindle / base plate max.: 1190 mm Travel (x / y): 495 / 200 mm Milling head swivel: -90° to +90° Height adjustment milling head: 260 mm Column diameter: 115 mm Working area base plate: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Cedpfxegd H Uxs Apherd Weight approx.: 362 kg Scope of supply • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Draw spindle M 16 • Reducing sleeve MK 4 / 3 • Combination milling arbor MK 4 / 27 mm • Automatic quill feed • Height-adjustable protective shield • Digital quill stroke indicator • Thread cutting device • Coolant system • LED machine light • Longitudinal measuring scale • Operating tool

Condition: new, Bernardo Gear Drill Press GB 35 THS Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Tapping capacity max.: M24 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed: (12) 43 - 2355 rpm Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Overhang: 340 mm Distance spindle / table max.: 580 mm Distance spindle / base plate: 1185 mm Crjdpfx Apsd Du Twjhod Quill stroke: 200 mm Column diameter: 160 mm Table size / T-slot size: 540 x 440 mm / 14 mm Working area base plate: 430 x 440 mm Motor power: 1.3 / 1.8 kW Machine dimensions (W x D x H): 660 x 900 x 2240 mm Weight approx.: 553 kg Scope of delivery • Drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 • Motorized table feed • Electromagnetic spindle feed • Initial filling with Shell Tellus 46 • Automatic tool ejector • Tapping device • Digital speed display • LED machine light • Coolant system • Digital depth gauge • Height-adjustable protective shield

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed Codpfex Agiuox Apherd • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: new, Bernardo GB 30 Vario geared drill press Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Maximum threading capacity: M22 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 3 Spindle speed / 2 speeds: 70 - 495 / 495 - 3500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Overhang: 280 mm Distance spindle / table max.: 650 mm Distance spindle / base plate: 1120 mm Quill stroke: 125 mm Column diameter: 110 mm Table size / T-slot size: 450 x 380 mm / 14 mm Work area base plate: 340 x 330 mm Motor output S1 100%: 1.1 kW Csdpfxogd H Uue Aphjrd Motor input S6 40%: 1.5 kW Machine dimensions (W x D x H): 500 x 800 x 2100 mm Weight approx.: 320 kg Scope of delivery • Drill chuck arbor MK 3 / B 16 • Reduction sleeve MK 3 / 2, MK 3 / 1 • Gear-type drill chuck 1 - 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Digital speed display • Initial filling with Shell Tellus 46 • Height-adjustable protective cover

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 34 mm Max. drilling capacity for grey cast iron (GG 20) at continuous operation S1: Ø 40 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 27 Max. thread cutting capacity for grey cast iron (GG 20) at continuous operation S1: M 33 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 420 mm x 400 mm Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Dimensions transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during thread cutting Automatic tool ejector Adjustable fixed work table (Type MF) Machine base plate with machined support surface, T-slots, and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in low-voltage range Color: RAL 7004 (signal grey), RAL 9011 (graphite black) Control circuitry in low-voltage range Documentation, operating and maintenance instructions Credpfxogy E S Ej Aphod

Condition: new, Bernardo GB 35 Vario Gear Drill Technical Specifications Drilling capacity in steel: 35 mm Drilling capacity in cast iron: 40 mm Maximum threading capacity: M24 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / 2 speeds: 65 - 460 / 460 - 3250 rpm Feed rate range: 0.1 / 0.2 / 0.3 mm/rev Overhang: 320 mm Distance spindle / table (max.): 580 mm Distance spindle / base plate: 1145 mm Quill stroke: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Base plate working area: 365 x 370 mm Motor output S1 100%: 1.5 kW Motor input S6 40%: 2.2 kW Machine dimensions (W x D x H): 600 x 870 x 2170 mm Weight (approx.): 375 kg Scope of delivery • Gear drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Coolant system • Threading device • Electromagnetic spindle feed • Automatic tool ejector • LED machine light • Initial filling with Shell Tellus 46 • Digital speed indicator Crjdpod Du Tysfx Aphsd • Height-adjustable protective shield

Condition: new, Bernardo GB 35 HSV pillar drilling machine with coolant system Drilling capacity max. 32 mm Drill chuck 1 – 16 mm / B 16 Morse taper MK 4 Spindle speed (12) 75 – 3200 rpm Feed rate 0.10 / 0.18 / 0.26 mm/rev Overhang 295 mm Distance spindle / table max. 775 mm Distance spindle / base plate 1185 mm Quill stroke 125 mm Column diameter 115 mm Table size 500 x 455 mm T-slot size 14 mm Working area base plate 375 x 365 mm Motor output S1 100% 1.1 / 1.5 kW (400 V) Motor input S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) 630 x 700 x 2050 mm Weight approx. 340 kg Scope of supply Cedpjd Hbwiefx Aphord Quick-change drill chuck 1 – 16 mm / B 16 Drill chuck arbor MK 4 / B 16 Coolant system Reducing sleeve MK 4 / 3 Height-adjustable safety guard Digital depth gauge Threading device LED machine light Operating tool

Condition: good (used), functionality: fully functional, Data : Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Crodpoy Af Hzsfx Aphod Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: new, Bernardo Gear-Driven Bench Drill Press GB 32 STi Technical Specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Cjdpfx Apjg Hwmxsherd Maximum thread cutting: M20 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / Number of speeds: 125 - 3030 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 mm/rev Overhang: 325 mm Distance spindle / table max.: 690 mm Distance spindle / baseplate: 1250 mm Quill stroke: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Work surface baseplate: 365 x 370 mm Motor output S1 100%: 1.0 / 1.2 kW Motor input S6 40%: 1.5 / 1.8 kW Machine dimensions (W x D x H): 570 x 900 x 2200 mm Weight approx.: 415 kg Scope of delivery • Gear-driven drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Coolant system • Electromagnetic spindle feed • Thread cutting device • Automatic tool ejector • LED machine light • Digital speed indicator • Height-adjustable safety guard • Initial filling with Shell Tellus 46

Condition: good (used), Year of construction: 1975, machine/vehicle number: 620421, Offer 24461 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - Drill spindle stroke 160 mm - 9 drill spindle speeds 90 - 1450 rpm - throat depth 300 mm - Table with 2 T-slots + attached machine vice Crodpfx Aju Atnljphed - Table dimensions 400 x 450 mm - Max. distance table - drill spindle 660 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.2 kW - Space requirement approx. W 600 x H 2100 x D 850 mm - Weight approx. 300 kg - with: - Drill chuck - 10 pcs. HSS drill bits 8 - 20 mm

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm Csdpjt Hr Svjfx Aphord - Drilling capacity in steel ST 60 40 mm - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60: 35 mm - Drilling capacity in steel ST 60: 40 mm - Drill spindle connection: MK 4 - Drill spindle stroke: 170 mm - Overhang: 345 mm - Rotary table with 2 T-slots: 550 mm - Max. distance table – drill spindle: 650 mm - Max. distance base plate – drill spindle: 1000 mm - Feeds: 0.09 - 0.16 - 0.28 mm/rev Codpfx Apskt Nqqjherd - Variable speed AZ gearbox with gear shift - Continuously adjustable drill spindle speeds: 40 - 720 rpm - Right/left rotation - Drive: 400 V / 2.5 kW - Lighting - Coolant system - Space requirement: approx. W 750 x H 1950 x D 1000 mm - Weight: approx. 700 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 23036, Offer 23380 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm Credpfsrckw Iox Aphjd - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max. distance machined base plate - drilling spindle 1050 mm - Column diameter 160 mm - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 5551, Offer 25249 Technical Specifications: - Drilling capacity in steel ST 60: 32 mm - Drilling capacity (max) in steel ST 60: 45 mm - Spindle taper: MT 4 - Drilling spindle stroke: 160 mm - Throat depth: 300 mm - Table with 2 T-slots: 500 x 370 mm - Column diameter: 145 mm - Feeds – Electromagnetic: 0.1 – 0.2 – 0.3 mm/rev Crodew Ilw Ajpfx Aphed - Equipped with overload protection - Spindle speeds steplessly adjustable - Range 1: 65 – 240 + 240 – 875 rpm - Range 2: 130 – 480 + 480 – 1750 rpm - Drive: 400 V / 1.4 / 2.2 kW - Space requirements (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 450 kg

Year of construction: 2005, condition: good (used), Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 - Feeds - Drill spindle stroke: 120 mm - Drill spindle speeds, stepless: 80 - 1400 rpm - Overhang: 260 mm - Max. distance table - drill spindle: 760 mm - Table with 2 T-slots: 500 x 350 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.7 / 1.3 kW - Space requirement: approx. W 500 x H 1900 x D 850 mm - Weight: approx. 260 kg Csdpfx Apef A Dywohord - Includes: - Drill chuck 3-12 mm - Lighting

Year of construction: 1992, condition: good (used), machine/vehicle number: 144202, Technical data: - Drilling capacity in steel ST 60: 32 mm - Thread cutting capability up to: M 20 - Drill spindle mount: MK 3 - Feed rates: 0.1 + 0.2 + 0.3 mm/rev Csdpfxogbykro Aphsrd - Drill spindle stroke: 150 mm - 12 drill spindle speeds: 80 - 1400 rpm - Overhang: 280 mm - Max. distance table - drill spindle: 760 mm - Table with 2 T-slots: 550 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.4 / 2.3 kW - Space requirement: approx. W 550 x H 1950 x D 850 mm - Weight: approx. 360 kg - Includes: - Coolant system - Quick-change drill chuck - 20 pcs. HSS various drills, 8 - 25 mm

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 4000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) Crsdpfx Aoxcg D Eophod LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: like new (used), Year of construction: 2025, Column Drilling Machine BOMA SB 32 - V - CE marking - Exhibition machine / Unused - Morse taper MT 3 - Infinitely variable speed control - Thread cutting device up to M16 - Spindle speeds / Infinitely variable 50-2100 rpm - Spindle stroke 135 mm - Worktable rotatable 360 degrees - Worktable size 415x375 mm - Column diameter 100 mm - Throat depth 250 mm - Distance spindle - table 850 mm - Distance spindle - base plate 1190 mm - Drill chuck - Documentation Crjdpfx Ajyrnm Uophed Dimensions: LxWxH 0.6x0.9x1.85 meters / Weight 280 kg Errors and omissions excepted